This battle-ready Viking sword was developed in close cooperation with fencing and martial arts instructor Volker Kunkel and his West-Coast-Institut. Unfortunately, Volker did not live to see the market launch of this small series. He passed away very early in April 2021.

This sword, which was inspired by a sword held at the Copenhagen National Museum, features a non-sharp high-carbon spring steel blade. The wide blade, because it is wider, offers less weight, maintaining its incredible strength. The short guard and the pommel are made of steel. The grip is wrapped with leather strap.

Viking Sword with Sheath,Ready for the Battle of the 11th Century (Blunt Practice), SK-BThe battle-ready one-hand sword we offer here is an interpretation of an 11th century Viking sword. This type of sword (Oakeshott Type X) represents the transition from the Viking sword to the medieval or chivalrous sword, and the many surviving examples attest to its popularity both at the end of the Viking Era and in the High Middle Ages.

Due to its total length of 82 cm, this Viking-era sax or scramasax knife should be classified as a sword. It features a single-edged EN45 spring steel blade with a thick spine and pointed tip. The full blade spike is robustly peeled up to the pommel. A particularly wide fuller runs through the top two thirds of the blade along the column and ends just before the tip of the blade. The wooden handle has a tight bond of thin brown leather cord.

Hanwei continues to innovate with its forging capability in the Trondheim sword, produced as a piece forged in high-carbon steel welded to standard.Modeled after swords that were discovered in the area around Trondheim, Norway, the sword displays the style of the early 9th century, a time when the Norwegian Vikings were plundering Britain and Ireland. The beauty of the blade is combined with the handle and hem, both wrapped in high quality leather, engraved on a classic Viking motif.

This beautiful one-hand Viking-era sword is based on a find discovered in 1950 at the gnёzdovo archaeological complex near Smolensk, Russia, during the excavation of tomb C-2. Dated between the 9th and 10th centuries and classified as Type D according to the typology of Petersen's Viking sword, the original piece was in a pit under the remains of a funeral pyre inside the tomb.Although the finely crafted and richly decorated handle (believed to be the product of a Gotlandese craftsman) was still remarkably well preserved, the blade was broken and folded. Despite its rather precarious state of conservation, it was still possible to detect engravings on its surface: an "O" shaped symbol on one side and the remains of a cross on the other. It is not yet clear whether these marks were the blacksmith's identifiers or if they were added later.Although its property cannot be clearly established, the materials and quality workmanship used in the drafting of this sword suggest that it was probably once the prestigious weapon of a noted Viking Rus chief or warrior.

In the pantheon of Norse deities, Baldur was the son of Odin and Frigg (i.e. brother of Thor and Loki) and as such was destined to reign after Odin. Beloved by all the gods except Loki, Baldur is known for providing joy to all those who spend time with him. In Old Norse poetry, Baldur's death is described as a tragedy and a foreshadowing of Ragnarök.In honor of the lesser-known brother, this classic Viking sword was designed as a tribute to Asgard's most beautiful limb. The leather hilt of this sword is laser-engraved with the three runes that Windlass believes best suit the Norse god. Some scholars believe that the name Baldur means "bold," which is why the rune of courage was added. In his attempt to protect Baldur from danger, Frigg asked everyone to swear never to hurt him (except the mistletoe), so the protection rune was also added. Finally, Baldur was also known to always be prepared for battle, and so the rune of strength completes the arrangement.The blade is engraved with runes that roughly translates as the spelling of "Baldur". The leather hem (with integrated belt) is covered by a layer of black suede, which is adorned with a high-quality leather upper and collar. A Viking symbol for the sun is depicted on the head and throat, as Baldur was known to all who knew him as a shining light.Includes matching wooden hem with suede cover.Manufactured by Windlass Steelcrafts.Please note that this sword is not a battle-ready weapon. It is designed as a collector's piece or decoration/display and is not suitable for combat reenactment. In addition to the collector's quality, it is also perfectly suited as an accessory, for example, to complete your fantasy.Details:- Blade material: 1065 high carbon steel- Overall length: approx. 95 cm- Blade length: approx. 79 cm- Blade thickness: approx. 4 mm- Cable length: approx. 10 cm / full handle approx. 16 cm-Max. Blade width: approx. 5.2 cm- Break-even point: approx. 17.5 cm (front of the guard)-Incl. Leather-covered wooden sheath with brass appliqués- Weight without hem: approx. 1280 g- Weight with hem: approx. 1900 g

The Last Kingdom, Breath of Serpent, the Sword of UhtredUhtred of Bebbanburg, the son of a Saxon nobleman but captured by the Danes and raised as one of them, is forced to choose between the country of his birth and the people of his education. Your loyalty is always tested. What is it? Saxon or Danish?A born warrior, Uhtred is a leader of men, fearless and instinctive. Bound by oath to the king, he plays his part in Alfred's attempts to unite England into a kingdom in the face of Danish invasions. After Alfred's death, his sons Edward and Aethelflaed pursue their father's dream, and Uhtred is lured back into family politics when he joins Edward's service and falls in love with Aethelflaed. On a mission to regain his birthright, his homeland of Bebbanburg taken from him by his treacherous uncle, Aelfric, Uhtred must tread a dangerous path if he wants to do his part in the birth of a nation and ultimately recapture his ancestral lands.

This battle-ready Viking sword was developed in close cooperation with fencing and martial arts instructor Volker Kunkel and his West-Coast-Institute. Unfortunately, Volker did not live to see the launch of this small series on the market. He passed away very early, in April 2021.The goal was to offer a sturdy, yet light and well-balanced sword, ready for battle, with a smaller budget. Here, Volker contributed his many years of experience as a fencing teacher, trainer, and traveling merchant in medieval markets. The Ulfberth® team and their blacksmiths have implemented these specifications and the result is a battle-ready Viking sword with a great value for money.Based on the original from 9 to 10 c. examples found in Britain and classified as Type L according to Petersen's Viking sword typology, features a blade forged in spring steel, which has been hardened in oil and tempered to a Rockwell hardness of approx. 48-52 HRC. The very wide fuller makes it flexible and lightweight. The sword comes with approx. 2 - Edges 2.5 mm thick and tip rounded and relatively wide, which makes it eligible for combat on stage.Like many surviving historical examples of the time, the pommel is a two-part construction: the trilobed upper section is fixed to the curved base by means of two rivets, and the complete spike of the blade is solidly hammered into the lid of the pommel.This sword is available with two different blade lengths (select the model you need from the drop-down menu: short = 64 cm / long = 74 cm). The short version is particularly ideal as a beginner's sword for fencers who are not yet very strong.Matching leather sheaths with sword belt (product no. ULF-SW-11SA or ULF-SW-11SB ) are available separately.Details:- Battle-ready sword category: SK-B Learn more about our classification for practical swords without cutting- Blade material: spring steel (high carbon steel, non-stainless), hardened and tempered- Rockwell Hardness: approx. 48-52 HRC- Cable material: leather-clad wood, handle and protection in cast steelDimensions Sword ULF-SW-12 A (short version)- Total length: approx. 80.5 cm- Blade length: approx. 64 /64.5 cm - Handle length: approx. 16 cm (handle approx. 10.5 cm)- Blade width in protection: approx. 4.6 cm- Blade thickness: approx. 4 mm (cutting edges approx. 2 mm)- Break-even point: approx. 10 cm from guard- Guard: approx. 12.5 cm long, 2 cm wide, 1 cm thick (center) / 2.5 cm thick (ends)- Weight: approx. 1140 g

This battle-ready Viking sword was developed in close cooperation with fencing and martial arts instructor Volker Kunkel and his West-Coast-Institute. Unfortunately, Volker did not live to see the launch of this small series on the market. He passed away very early, in April 2021.The goal was to offer a sturdy, yet light and well-balanced sword, ready for battle, with a smaller budget. Here, Volker contributed his many years of experience as a fencing teacher, trainer, and traveling merchant in medieval markets. The Ulfberth® team and their blacksmiths have implemented these specifications and the result is a battle-ready Viking sword with a great value for money.Based on the original from 9 to 10 c. examples found in Britain and classified as Type L according to Petersen's Viking sword typology, features a blade forged in spring steel, which has been hardened in oil and tempered to a Rockwell hardness of approx. 48-52 HRC. The very wide fuller makes it flexible and lightweight. The sword comes with approx. 2 - Edges 2.5 mm thick and tip rounded and relatively wide, which makes it eligible for combat on stage.Like many surviving historical examples of the time, the pommel is a two-part construction: the trilobed upper section is fixed to the curved base by means of two rivets, and the complete spike of the blade is solidly hammered into the lid of the pommel.This sword is available with two different blade lengths (select the model you need from the drop-down menu: short = 64 cm / long = 74 cm). The short version is particularly ideal as a beginner's sword for fencers who are not yet very strong.Matching leather sheaths with sword belt (product no. ULF-SW-11SA or ULF-SW-11SB ) are available separately.Details:- Battle-ready sword category: SK-B Learn more about our classification for practical swords without cutting- Blade material: spring steel (high carbon steel, non-stainless), hardened and tempered- Rockwell Hardness: approx. 48-52 HRC- Cable material: leather-clad wood, handle and protection in cast steelDimensions Sword ULF-SW-12 B (long version)- Total length: approx. 90.5 cm - Blade length: approx. 74 /74.5 cm- Handle length: approx. 16 cm (approx. 10.5 cm tightness)- Blade width in protection: approx. 4.6 cm- Blade thickness: approx. 4 mm (cutting edges approx. 2 mm)- Break-even point: approx. Guard 15 cm- Guard: approx. 12.5 cm long, 2 cm wide, 1 cm thick (center) / 2.5 cm thick (ends)- Weight: approx. 1200 gSpecifications may vary slightly from part to part.The steel used here is not rustproof and may have slight surface stains in some places. We recommend that you do blade maintenance regularly, for example using Ballistol Universal Oil, which is ideal for taking care of steel.This is an original ULFBERTH ® product.

Viking sword, Petersen H type, various blade lengths, without sheathBattle ready (practical cut), SK-BThis battle-ready Viking sword was developed in close cooperation with fencing and martial arts instructor Volker Kunkel and his West-Coast-Institute. Unfortunately, Volker did not live to see the launch of this small series on the market. He passed away very early, in April 2021.The goal was to offer a sturdy, yet light and well-balanced sword, ready for battle, with a smaller budget. Here, Volker contributed his many years of experience as a fencing teacher, trainer, and traveling merchant in medieval markets. The Ulfberth® team and their blacksmiths have implemented these specifications and the result is a battle-ready Viking sword with a great value for money.Based on the original from 9 to 10 c. examples found in Birka, Sweden, and classified as Type H/I according to Petersen's Viking sword typology, features a spring steel forged blade, which has been hardened in oil and tempered with a Rockwell hardness of approx. 48-52 HRC. The very wide fuller makes it flexible and lightweight. The sword comes with approx. 2 - Edges 2.5 mm thick and tip rounded and relatively wide, which makes it eligible for combat on stage.Like many surviving historical examples of the time, the triangular pommel is a two-part construction: the complete spike of the blade is anchored to the lower section and the pommel cap is fixed to the base by means of two rivets.This sword is available with two different blade lengths (select the model you need from the drop-down menu: short = 64 cm / long = 74 cm). The short version is particularly ideal as a beginner's sword for fencers who are not yet very strong.Matching leather sheaths with sword belt (product no. ULF-SW-11SA or ULF-SW-11SB) are available separately.Details:- Battle-ready sword category: SK-B Learn more about our classification for practical swords without cutting- Blade material: spring steel (high carbon steel, non-stainless), hardened and tempered- Rockwell Hardness: approx. 48-52 HRC- Cable material: leather-clad wood, handle and protection in cast steelDimensions Sword ULF-SW-13 A (short version) - Total length: approx. 81.5 cm- Blade length: approx. 64 /64.5 cm- Handle length: approx. 17.5 cm (handle approx. 10.5 cm)- Blade width in protection: approx. 4.6 cm- Blade thickness: approx. 4 mm (cutting edges approx. 2 mm)- Break-even point: approx. 10 cm from guard- Guard: approx. 10 cm long, 2.5 cm wide, 1.7 cm thick- Weight: approx. 1250 g

Viking sword, Petersen H type, various blade lengths, without sheathBattle ready (practical cut), SK-BThis battle-ready Viking sword was developed in close cooperation with fencing and martial arts instructor Volker Kunkel and his West-Coast-Institute. Unfortunately, Volker did not live to see the launch of this small series on the market. He passed away very early, in April 2021.The goal was to offer a sturdy, yet light and well-balanced sword, ready for battle, with a smaller budget. Here, Volker contributed his many years of experience as a fencing teacher, trainer, and traveling merchant in medieval markets. The Ulfberth® team and their blacksmiths have implemented these specifications and the result is a battle-ready Viking sword with a great value for money.Based on the original from 9 to 10 c. examples found in Birka, Sweden, and classified as Type H/I according to Petersen's Viking sword typology, features a spring steel forged blade, which has been hardened in oil and tempered with a Rockwell hardness of approx. 48-52 HRC. The very wide fuller makes it flexible and lightweight. The sword comes with approx. 2 - Edges 2.5 mm thick and tip rounded and relatively wide, which makes it eligible for combat on stage.Like many surviving historical examples of the time, the triangular pommel is a two-part construction: the complete spike of the blade is anchored to the lower section and the pommel cap is fixed to the base by means of two rivets.This sword is available with two different blade lengths (select the model you need from the drop-down menu: short = 64 cm / long = 74 cm). The short version is particularly ideal as a beginner's sword for fencers who are not yet very strong.Matching leather sheaths with sword belt (product no. ULF-SW-11SA or ULF-SW-11SB) are available separately.Details:- Battle-ready sword category: SK-B Learn more about our classification for practical swords without cutting- Blade material: spring steel (high carbon steel, non-stainless), hardened and tempered- Rockwell Hardness: approx. 48-52 HRC- Cable material: leather-clad wood, handle and protection in cast steelDimensions Sword ULF-SW-13 B (long version)Total length: approx. 91.5 cm- Blade length: approx. 74 /74.5 cm- Handle length: approx. 17.5 cm (handle approx. 10.5 cm)- Blade width in protection: approx. 4.6cm- Blade thickness: approx. 4 mm (cutting edges approx. 2 mm)- Break-even point: approx. Guard 15 cm- Guard: approx. 10 cm long, 2.5 cm wide, 1.7 cm thick- Weight: approx. 1350 gSpecifications may vary slightly from part to part.The steel used here is not rustproof and may have slight surface stains in some places. We recommend that you do blade maintenance regularly, for example using Ballistol Universal Oil, which is ideal for taking care of steel.This is an original product ULFBERTH ® .

This sword was discovered in the Langeid area of Norway in 2011 in an ancient Viking burial ground. Along with coins and an axe, an astonishing and unique sword was exhumed that had not seen the light of day for more than 10 centuries. Handle with elaborate inscriptions like the one displayed on the original weapon. Windlass Steelcrafts has replicated this incredible weapon, creating a fully functional sword with a carbon steel blade that is capable of fighting like the original. Measurements: 101 cm

This beautiful Viking Sword is based on an original sword that was part of the great tomb of Vestre Berg in Løiten/Løten, Norway. According to archaeological records, the grave was discovered in 1887 among some rocks during cleaning work. A distinctive feature of the original, which dates back to the tenth century, is the blade, which was presumably ritually bent into an "S" shape. It is not known if this practice was intended to symbolically "kill" the sword before it was buried, or if the purpose was to deter grave robbers. The sword, classified as Type O according to Petersen's Viking sword typology, is now in the collection of the Kulturhistorisk Museum (formerly Universitetets Oldsaksamling) in Oslo, Norway.The replica features a wide, double-edged blade with wide, fuller, and unsharp cutting edges. The grip consists of a handle wrapped in red leather, a short, slightly curved guard, and a generously sized five-lobed pommel. The bronze guard and pommel are engraved with the same patterns and motifs that adorn the original find.The sword comes complete with a red wood and leather scabbard fitted with a bronze throat and cape and a sword belt with bronze accessories.Note that this medieval sword is not a battle-ready weapon. It is designed as a collector's piece or decoration/display and is not suitable for combat reenactment. In addition to collector's quality, it is also perfectly suited as an accessory, for example to complete your costume.Details: - Blade material: High carbon steel- Rockwell hardness: 48 – 52 HRC- Handle material: leather-covered wood, bronze handle and protection- Total length: approx. 94 cm- Blade length: approx. 78.5 cm- Blade thickness: approx. 4 mm- Handle length: approx. 15.5 cm (approx. 10.5 cm tightness)-Max. Blade width: approx. 5 cm- Break-even point: approx. 15 cm of the guard-Incl. Wooden scabbard with genuine leather cover, brass throat and cape, and sword belt- Weight without sheath: approx. 1.3 kg- Sheathed weight: approx. 2 kgSpecifications may vary slightly from part to part. The steel used here is not rust-proof and may have slight surface stains in places. We recommend that you maintain the blade regularly, for example by using Ballistol Universal Oil, which is ideal for caring for steel.

This beautiful sword from the Vendel Period is loosely based on a finely crafted artifact kept today in the History Museum (Historiska Museet) in Stockholm, Sweden (Item 120525, SHM 10796). The original piece, a gilded bronze sword hilt (see last photo), is a tomb found at Broa, on the Swedish island of Gotland.Many finds attributed to the Vendel era (roughly lying between the Migration Period and the Viking Age in Swedish history) testify to the high quality of craftsmanship attainable in Scandinavia at the time.In terms of shape, this one-hander is a classic example of a Norse or Viking sword. The wide double-edged carbon steel blade is medium length, with a wide fuller running the entire length of the blade and disappearing just short of the point. The edges are not sharp, while the tip is pointed, and the full tang of the blade is threaded into the pommel.The beautiful hilt of this one-handed sword is made of bronze, polished and adorned with intricate motifs inspired by the original artifact. Since swords with all-bronze handles can tend to be heavy and a little unbalanced, we opted for a hollow hilt to get around this issue.Our one-handed Vendel sword comes complete with a brown wood and leather scabbard with wooden hanging loop (maximum belt width of 5.5 cm) and brass throat and hat.Please note that this medieval sword is not a battle-ready weapon. It is designed as a collector's piece or decoration/display and is not suitable for combat reenactment. In addition to its quality as a collectible, it is also perfectly suited as a prop, for example, to complete your costume.

This beautiful Viking sword is a reconstruction of an original find dating from the period between 950 and 1050, and is classified as an X-type according to Petersen's typology of Viking swords.The inscriptions on the blade are a distinctive feature of the original sword, which is now in the collection of the Musée de l'Armée in Paris, France. One side is marked with the well-known inscription of the manufacturer ULFBERHT, a Rhineland blacksmith's workshop believed to be one of the earliest "marks" of swords (with about 170 swords dating from the 9th to the 11th c., with the same inscription +VLFBERHT+, and found throughout Europe, even in western Russia). The other side bears the inscription DUNA + DUNA XX, a supposed abbreviation, whose exact meaning is still unknown.The replica offered here has a straight double-edged blade with sharp edges Like the original find, the wide fill is engraved with the inscription VLFBERH+T on one side and DUNE + DUNA XX on the other. The handle consists of a short steel protector with rounded ends, and a wooden handle wrapped in brown leather, which ends in a "tea cozy" pommel made of steel.The sword comes complete with a brown wooden and leather scabbard with a steel plate and a wooden hanging loop (maximum belt width of 5 cm).Please note that this medieval sword is not a battle-ready weapon. It is designed as a collector's piece or decoration/display and is not suitable for combat reenactment. In addition to its quality as a collectible, it is also perfectly suited as a prop, for example, to complete your costume.

Viking style functional sword with a total size of 94.5 cm without scabbard, 1065 carbon steel blade, leather handle and scabbard finished in synthetic leather with metal anchors.
Category: Cat.BOverall size: 94.5 cmBlade size: 76.5 cmBlade thickness: 4.7 mmSupport: NoWeight: 1620 gr (Without case)

MEASUREMENTS:• Total length: 95 cm / 37.4 inches• Blade Length: 75.5cm / 29.7inch• Grip Length: 13 cm / 5 inches• Grip circumference: 10 cm / 4 inches• Cross Head Width: 19cm / 7.5inch• Blade thickness: approx. 4.2 – 4.8 mm• Blade width: 4.3 – 4.5 cm (1.7 – 1.8 inches)
Bring the spirit of the Viking Age to your collection with this traditionally hand-forged Viking sword, designed for history enthusiasts, scenic combat artists, and collectors who demand visual authenticity and reliable construction. DoneHand-crafted from high-carbon polished steel, this blunt blade is designed for safe training, choreography, and light combat practice. Its full-tang design and carefully balanced profile make it a reliable tool for controlled combat or educational demonstrations.This sword features a classic disc pommel and a straight guard, faithful to specimens found in Viking tombs and museum collections. The leather-covered grip ensures a secure grip, whether in a theatrical battle or showing off at home.The custom leather sheath protects the blade and completes the authentic look, with a polished steel cover that adds refined details.While this piece is often referred to as a "fully hardened steel blade," keep in mind that it is not sharpened for cutting or live use. Instead, it's optimized for stage performances, light combat, and confident handling, offering the perfect combination of historical accuracy and hands-on durability.
USE AND CARE:• Suitable for historical events, Viking role-playing games, and live-action role-playing games (LARP)• Great for light stage combat and art demonstrations.• Store in a dry place and wipe after handling to prevent rust.• Apply light oil to the blade regularly.• Don't try to sharpen: It's designed for use in boring training.
IDEAL FOR:Viking role-playing and historical martial artistsCollectors ofMedieval replicas of weapons Film, theatre and television productionsEducational museums and exhibitions

Viking style functional sword with a total size of 94.5 cm without scabbard, 1065 carbon steel blade, leather handle and scabbard finished in synthetic leather with metal anchors.
Category: Cat.BOverall size: 94.5 cmBlade size: 76.5 cmBlade thickness: 4.7 mmSupport: NoWeight: 1620 gr (Without case)

Viking style functional sword with a total size of 94.5 cm without scabbard, 1065 carbon steel blade, leather handle and scabbard finished in synthetic leather with metal anchors.
Category: Cat.BOverall size: 94.5 cmBlade size: 76.5 cmBlade thickness: 4.7 mmSupport: NoWeight: 1620 gr (Without case)