European Close Helmet / Visored Helm, ca. 1520, 1.6 mm steel
- ready for battle -

This reproduction of a typical early 16th-century tights helmet with hinged visor (known as helmet or close closure) is made of 1.6 mm thick steel plate and therefore only suitable for a combat re-enactment.

It features a comfortable leather lining and a chin strap with buckle.

Cross-helmet, 2 mm soft steel, with leather coating
Ready for battle

Attractive reconstruction of a large transverse ca rudder. 1180 A.D., also called pot hull, bucket hull and barrel rudder. Includes a very comfortable leather inlay as well as a chin strap with buckle.

Replica of the Slavic helmet of the 8th century. The helmet is composed of metal plates with a thickness of 2 mm. riveted between them. At the top, it is ready to decorate with dove hair (not included) and also on the back to put a mesh protection for the neck (not included). The helmet is adjusted by a leather chin strap. The helmet has an internal circumference of 62 cms. approx.

Medieval functional helmet Pembridge from the year 1370 made of 2mm steel. thick. The original is at the Royal Museum of Scotland in Edinburgh. Includes leather chin strap with buckles.

Spangenhelm helmet was medieval with front viewfinder. It was performed by the Normans or crusaders. Handmade in 2 mm steel. thick. The visor comes with a riveted helmet. Includes padded lining, as well as leather strap and brass buckle.

This type of Iron Hat was worn in Europe in the mid-15th century (1450).Features:Made of 2mm thick steel. Includes adjustment straps, leather.Weight approx: from 2.40 kg to 3.30 kgAvailable sizes:M = Head circumference of 61 cmL = Head circumference of 63 cm

This helmet is a replica of the original "Wencelas", dating from the 10th century.It is made of steel with 2mm thickness and reinforced in the nasal.Includes adjustment straps, leather.Sizes available:
M: up to 62 cm head circumference
Weight: from 2.15 to 2.55kg

Medieval Helmet Normal Spangen year 1180 AD with front visor. Made of 1.6 mm steel. to 3.2 mm. thick. It comes riveted and welded. Includes padded lining.

Made of steel with 2 mm thicknessAvailable in three sizes (display size on order)Size S: for head circumference approx. 59 cmSize M: for head circumference approx. 61 cmSize L: for head circumference approx. 62 cmWeight approx: 1.5 kgIt features inside lining and adjustable leather strap.

This replica is made of steel with a thickness of 2 mm. It is adjusted by high quality leather straps. This helmet has a circumference of 62 cms. approx.

This fully ready replica for the battle of a historic Viking helmet is made of 2 mm steel. The two halves of the helmet are doubly welded together (inside and outside). The steel supports as well as the 2 mm spectral section are riveted to the helmet. This type of tough workmanship ensures a robust product that offers the best possible protection during battle reconstitution.

This type of helmet was popular among vikings during the 8th and 9th centuries. The direct mail safes used to be worn underneath or fit the helmet.

Available in various sizes.

Combat bacinete with folding visor. Up to 62 cm head size, padded inside. 2 mm thick steel.

This replica of an Italian iron hat i shand-forged 1.6 mm thick steel. The original is dated 1460.These helmets were worn not only in Italy, but for example. it is also very common in Switzerland and southern Germany, especially by infantry troops. The wide flap not only protects the head, but also the shoulders, chest and back from any danger that comes from above, such as the arrow of the end of the medieval arch.
The corrugated and crossed steel bands are riveted into the helmet. This consists of two parts that have been welded together in the center. Although the thickness of the material is "only" 1.6 mm, the helmet can be described as ready for battle.

Reconstruction of a Spangenhelmet with nasal, as it was popular with Vikings and Normans during the 10th and 11th centuries. The long nasal is handmade approx. Strong 4 mm steel to withstand even the strongest blows. It's riveted in the hubcap.

Both halves are welded together. In addition, four strap accessories (Spangen) are riveted to the helmet to strengthen it. This manufacture ensures high robustness and good protection in battle.

The helmet has a riveted, adjustable, high-class padded lining with solid leather chin strap and a brass buckle.

German Spangenhelmet, about 500 AD

This replica follows a Germanic spangenhelmet of approximately 500 AD. The top of the pointed helmet as well as the nasaand jowl flaps are typical of this era. A very comfortable adjustable leather lining with chin strap and buckle is included.

This conical helmet is especially interesting for archers. The helmet should be found to be the most possible field of view. The helmet is made of approximately 1.6 mm thick steel and has an adjustable leather inlay. About and is about 2.5 cm tall rivets of riveted leather. The helmet is suitable for both re-staging and for combat light show also for LARP, cinema, theater and costumes.

ready for battle
This usable helmet is based on historical originals. It is made of 1.6 mm shielded steel. The kettle hat has a leather inlay.

Also known as big helmet or heaume, helmet cube or barrel helmet, for its simple shape, a   cylinder with flat steel top and completely covering the head. He had small openings for   his eyes and mouth.

This glorious 13th-century helmet is worthy of King Ferdinand III of Castile and represents many helmets of the time in Europe.
This 13th century helmet is made of 18 gauge steel. The helmet is luxuriously decorated at the front with brass.  Inside it has an adjustable padded fabric lining with leather straps.

Burgonet helmet, 1.2 mm steel

The Burgonet developed at the beginning of the 16th century of the Sallet.Notably the Burgonet used by the infantry, then also cavalry and became one of the most common types of helmets of its time.

This Orc-mask helmet is based on a medieval Bascinet. The lower jaw and the upper mask are foldable.
The helmet is fully handmade strong steel of 1.6 mm. It has a high quality inlay, adjustable, padded with leather chin straps.

Details:
- Head circumference: up to approx. 60 cm
- Long distance (back to front): approx. 22cm
- Short distance (ear to ear): approx. 17 cm
- Finish: untreated, lightly lubricated
- Material: approx. 1.6mm strong steel
- Weight: approx. 2.65 cm

Gjermundbu helmet with riveted aventail, 2 mm steelGjermundbu helmet with riveted aventail, 2 mm steel
Gjermundbu helmet with riveted aventail, steel 2 mm
- ready for battle

European Close Helmet / Visored Helm, ca. 1520, 1.6 mm steel
- ready for battle -

This reproduction of a typical early 16th-century tights helmet with hinged visor (known as helmet or close closure) is made of 1.6 mm thick steel plate and therefore only suitable for a combat re-enactment.

It features a comfortable leather lining and a chin strap with buckle.

Italian Bascinet, Barbute helmet, about 1470, 2 mm steel- ready for battle.

This helmet is a replica of the original "Wencelas", dating from the 10th century.It is made of steel with 2mm thickness and reinforced in the nasal.Includes adjustment straps, leather.Sizes available:
M: up to 62 cm head circumference
Weight: from 2.15 to 2.55kg

Being in the legion, you need protection from projectiles and blows without disturbing your vision or your breathing! After all, you legionnaires are well known for walking hundreds of miles on the empire road, from one battlefield to another, and walking miles has never been easy for those wearing a fully enclosed helmet.
The Roman helmet worn during the Empire is the product of a slow evolution of the first simple Italian bronze helmet to the Celtic-influenced helmet worn by the legionaries of Augustus, Trajan, Hadrian and all other famous Roman emperors.
The fact is that this remarkable helmet proves surprisingly versatile and strikes a perfect balance between protection and mobility. Just pair it with one of our lorica hamata and you'll get an ideal combination for your next LARP or reconstitution! A great look without harming your vision and freedom of movement.
This gorgeous helmet is handmade 18 gauge soft steel, lined with a comfortable and secure synthetic leather lining. A circumference of approx. 68 cm makes almost all head sizes fit. The historic crest attached to the top will make your Roman outfit stand out!

This helmet has an antique finish and a circumference of 68 cm, which allows the user to also fit a suitable cap or padded cover. This helmet includes a leather lining suspension and chin strap that can be adjusted to better fit the user. The inside of the helmet is also darkened to improve corrosion resistance. Made of 1.6mm steel