Sword for Portuguese Artillery Officers
  • -20%
Sword for Portuguese Artillery Officers
This quality sword is a ceremonial sword, a model used in Portugal.


Blade: Stainless steel. Curved blade, hand-forged according to traditions, hardened and polished by handelement.
Guard: brass, hand polished, nickel plated, carved worked.
Handle: in mahogany wood.
Sheath: Steel tube, hand polished, nickel-plated with 1 ring.
Accessory Included: Thick fabric cover, special saber.
Delivered with quality certificate.



Sword length: Approx. 1,020 mm.
Weight of the sword with scabbard: Approximately. 1.400 gr
Weight of the sword without scabbard: approx. 790 gr
€354.24
€442.80
Details View details  
Viking longsword, Peterson Type G, with leather hem - 2
  • -20%
Viking longsword, Peterson Type G, with leather hem
Due to its total length of 82 cm, this Viking-era sax or scramasax knife should be classified as a sword. It features a single-edged EN45 spring steel blade with a thick spine and pointed tip. The full blade spike is robustly peeled up to the pommel. A particularly wide fuller runs through the top two thirds of the blade along the column and ends just before the tip of the blade. The wooden handle has a tight bond of thin brown leather cord.
€105.39
€131.73
Details View details  
Sword for Portuguese Cavalry Officers
  • -20%
Sword for Portuguese Cavalry Officers
0Sword for Cavalry Officers 

This quality sword is a ceremonial sword, a model used in Portugal.


Blade: Stainless steel. Curved blade, forged by hand according to traditions, hardened and polished by hand.
Guard: brass, hand-polished, nickel-plated, closed type and with helmet.
Handle: in mahogany wood.
Sheath: Steel tube, hand polished, nickel-plated with 1 ring.
Accessory Included: Thick fabric cover, special saber.


Delivered with quality certificate.

Material Control: Every step of production is controlled. The manual work of our products ensures effective control.

Technical information about finishes:


Stainless Steel: The main advantage of using stainless steel is, as its name suggests, protection against oxidation. Unlike carbon steel, stainless steel does not need a surface treatment to protect it from oxidation. All of our blades are forged and tempered in the traditional way. The use of sabers and swords as parry weapons no longer justifies the use of carbon steels that reduce the life of the blades.
€354.24
€442.80
Details View details  
Viking Sword Trondheim - Damascus Steel - 4
  • -20%
Viking Sword Trondheim - Damascus Steel
Hanwei continues to innovate with its forging capability in the Trondheim sword, produced as a piece forged in high-carbon steel welded to standard.Modeled after swords that were discovered in the area around Trondheim, Norway, the sword displays the style of the early 9th century, a time when the Norwegian Vikings were plundering Britain and Ireland. The beauty of the blade is combined with the handle and hem, both wrapped in high quality leather, engraved on a classic Viking motif.
€1,159.25
€1,449.06
Details View details  
Portuguese naval officer's sword
  • -20%
Portuguese naval officer's sword
Navy officer's sword.

This sword is of high quality is a ceremonial sword, model used in the navy of Portugal.


Blade: Stainless steel. Blade Slightly curved, hand-forged according to traditions, hardened and polished by hand. With acidity engraving ''naval motifs'', so deep that you can feel it with your fingernail.



Guard: brass, hand-polished, gilded 24 carats, with an embossed anchor.
Handle: Covered in leather, with

 filigree. Sheath: Steel tube, hand polished, covered in black leather, gold trims with 2 rings. Accessory Included: Thick fabric cover, special saber. Delivered with quality certificate.
 
€354.24
€442.80
Details View details  
Sword Longclaw , Game of Thrones Official - 1
  • -20%
Sword Longclaw , Game of Thrones Official








Description, details and features sword replica longclaw claw using Jon Snow (Jon Snow) on the television series game
of Thrones.   Authentic awesome replica of the sword that appears brandishing Jon Snow
(Jon Snow) on hbo's   television phenomenon Game of   Thrones. This sword was reproduced from
of the original with which the series was recorded, so that the finishes and details perfectly reflect the magnitude
of the gun. 




€569.09
€711.36
Details View details  
Napoleonic Cuirassier Sword 1801
  • -20%
Napoleonic Cuirassier Sword 1801
Despite the decreasing effectiveness of plate armor in the face of increasing effectiveness of firearms, the French cavalry in Napoleon's army still wore cuirass (medieval-style breastplates and backs) with mixed success. They were somewhat useful for deflecting musket and long-range pistol fire (we stress "a little"), but when the cuirassier's attire was paired with a helmet adorned with a feathered gorgon's head and ponytail, then a rather imposing figure on his way into battle. The accounts of the survivors of the British armies attest to the petrifying spectacle of compact groups of cuirassiers emerging from behind the French front lines.
This is his sword; The French cuirassier sword model 1801 is a heavy cavalry sabre with a straight blade, as the French preferred the blow to the blow or cut. This replica weighs just over 1,360 g, enough to perform a spear-type attack. The distal tapered blade is over 1/4 inch thick at the handle and is double-cut like the originals. It comes sharpened from the factory. Brass protector and button. Leather-wrapped handle with wire wrap.
Comes equipped with a steel sheath.
SPECIFICATIONS :

Total length: 109cm
Blade length: 95cm
Blade width: 3.49 cm
Blade thickness: 0.7 cm thick at the handle, 0.3 cm thick at 0.5 cm from the tip
Blade Material: High Carbon 1075 Steel
Weight: 1.360g
Edge: Sharp
Engraving: Not available
€373.92
€467.40
Details View details  
Medieval sword with sheath - 1
  • -20%
Medieval sword with sheath
On 21 July 1403, the Battle of Shrewsbury (Shropshire, England) saw Henry IV of England win over an army led by his former supporter, Sir Henry Harry Hotspur Percy of Northumberland (made forever famous by Shakespeare in his 1598 story). play Henry IV Part I). Percy, who turned against the king and allied himself with Owain Glyndwr, the rebel leader of the Welsh Revolution from 1400 to 1415 (also known as Glyndwr Rising), was killed during the scuffled, causing his army to disperse and the rebellion to fall apart.
Named after this decisive battle, the original Shrewsbury Sword, classified as Type XV by Ewart Oakeshott, is kept in the Wallace Collection.
€173.89
€217.36
Details View details  
French Napoleonic Sword of Húsar ANXI
  • -20%
French Napoleonic Sword of Húsar ANXI
This beautiful and elegant sword was used by Napoleon's hussar regiments, light cavalry troops mounted on fast horses, specializing in reconnaissance and skirmishes. Designed to be fast, the curved blade is suitable for cutting, but is thick enough to withstand a rapier attack. Like the original, the spine of the blade bears the following engraving: "Mfture Impale du Klingenthal October 1813" (the first two words are abbreviations for "Imperial Manufacture"). The basket-shaped guard, knob and tang are made of solid brass like the original. Fully sharpened from the factory.
Comes equipped with steel sheath.
SPECIFICATIONS :

Total length: 102cm
Blade length: 86cm
Blade width: 3cm
Blade material: 1075 high carbon steel.
Weight: 1.025g
Edge: sharp
Engraving: Not available
€378.84
€473.55
Details View details  
Viking Sword Rus , Petersen D, Gnezdovo, C-2 Barrow, 10th C - 1
  • -20%
Viking Sword Rus , Petersen D, Gnezdovo, C-2 Barrow, 10th C
This beautiful one-hand Viking-era sword is based on a find discovered in 1950 at the gnёzdovo archaeological complex near Smolensk, Russia, during the excavation of tomb C-2. Dated between the 9th and 10th centuries and classified as Type D according to the typology of Petersen's Viking sword, the original piece was in a pit under the remains of a funeral pyre inside the tomb.Although the finely crafted and richly decorated handle (believed to be the product of a Gotlandese craftsman) was still remarkably well preserved, the blade was broken and folded. Despite its rather precarious state of conservation, it was still possible to detect engravings on its surface: an "O" shaped symbol on one side and the remains of a cross on the other. It is not yet clear whether these marks were the blacksmith's identifiers or if they were added later.Although its property cannot be clearly established, the materials and quality workmanship used in the drafting of this sword suggest that it was probably once the prestigious weapon of a noted Viking Rus chief or warrior.
€316.16
€395.20
Details View details  
Civil Guard Sabre (Peru)
  • -20%
Civil Guard Sabre (Peru)
Civil Guard Saber
 
MANUFACTURED TO THE SPECIFICATIONS OF THE GOVERNMENT OF PERU.
 
All blades are stainless steel polished, engraved and finished to government specifications.
 
Includes hem.
€393.60
€492.00
Details View details  
Baldur's Sword, Windlass - 1
  • -20%
Baldur's Sword, Windlass
In the pantheon of Norse deities, Baldur was the son of Odin and Frigg (i.e. brother of Thor and Loki) and as such was destined to reign after Odin. Beloved by all the gods except Loki, Baldur is known for providing joy to all those who spend time with him. In Old Norse poetry, Baldur's death is described as a tragedy and a foreshadowing of Ragnarök.In honor of the lesser-known brother, this classic Viking sword was designed as a tribute to Asgard's most beautiful limb. The leather hilt of this sword is laser-engraved with the three runes that Windlass believes best suit the Norse god. Some scholars believe that the name Baldur means "bold," which is why the rune of courage was added. In his attempt to protect Baldur from danger, Frigg asked everyone to swear never to hurt him (except the mistletoe), so the protection rune was also added. Finally, Baldur was also known to always be prepared for battle, and so the rune of strength completes the arrangement.The blade is engraved with runes that roughly translates as the spelling of "Baldur". The leather hem (with integrated belt) is covered by a layer of black suede, which is adorned with a high-quality leather upper and collar. A Viking symbol for the sun is depicted on the head and throat, as Baldur was known to all who knew him as a shining light.Includes matching wooden hem with suede cover.Manufactured by Windlass Steelcrafts.Please note that this sword is not a battle-ready weapon. It is designed as a collector's piece or decoration/display and is not suitable for combat reenactment. In addition to the collector's quality, it is also perfectly suited as an accessory, for example, to complete your fantasy.Details:- Blade material: 1065 high carbon steel- Overall length: approx. 95 cm- Blade length: approx. 79 cm- Blade thickness: approx. 4 mm- Cable length: approx. 10 cm / full handle approx. 16 cm-Max. Blade width: approx. 5.2 cm- Break-even point: approx. 17.5 cm (front of the guard)-Incl. Leather-covered wooden sheath with brass appliqués- Weight without hem: approx. 1280 g- Weight with hem: approx. 1900 g
€560.05
€700.07
Details View details  
Medieval Tewkesbury sword with sheath - 1
  • -20%
Medieval Tewkesbury sword with sheath
The Wars of the Roses, fought between 1455 and 1485, were a series of battles for the English crown between the Houses of York and Lancaster. Both families were members of the same European royal dynasty, the Plantagenets, who ruled England for the past three centuries. These civil wars (punctuated by brief episodes of relative peace) owe their name to the respective emblem of rival families, a white rose for Yorkers, and a red one for the Lancastrians. After 30 years of political plots and terrible bloodshed, the family dispute led to the end of the Plantagenet dynasty and the rise of the House of Tudor.


€126.46
€158.08
Details View details  
Artillery Saber (Peru)
  • -20%
Artillery Saber (Peru)
Artillery Saber
 
MANUFACTURED TO THE SPECIFICATIONS OF THE GOVERNMENT OF PERU.
 
All blades are stainless steel polished, engraved and finished to government specifications.
 
Includes hem.
€413.28
€516.60
Details View details  
Mini Sword Templarios,model2 - 1
  • -20%
Mini Sword Templarios,model2
Templar model of letter opener, handle, protection and handle are in bronze color. The total size is 21cm of the steel blade 420, presented with blister
Model: S7004BTotal size: 21 cmSheet size: 14.5 cm.Sheet thickness: 1.7 mmWeight: 41 g
€6.32
€7.90
Details View details  
Cavalry Sabre (Peru)
  • -20%
Cavalry Sabre (Peru)

 
Cavalry Sabre (Peru)
MANUFACTURED TO THE SPECIFICATIONS OF THE GOVERNMENT OF PERU.
 
All blades are stainless steel polished, engraved and finished to government specifications.
 
Includes hem.
€393.60
€492.00
Details View details  
Viking short sword, Petersen L type, cut practice, SK-B - 1
  • -20%
Viking short sword, Petersen L type, cut practice, SK-B
This battle-ready Viking sword was developed in close cooperation with fencing and martial arts instructor Volker Kunkel and his West-Coast-Institute. Unfortunately, Volker did not live to see the launch of this small series on the market. He passed away very early, in April 2021.The goal was to offer a sturdy, yet light and well-balanced sword, ready for battle, with a smaller budget. Here, Volker contributed his many years of experience as a fencing teacher, trainer, and traveling merchant in medieval markets. The Ulfberth® team and their blacksmiths have implemented these specifications and the result is a battle-ready Viking sword with a great value for money.Based on the original from 9 to 10 c. examples found in Britain and classified as Type L according to Petersen's Viking sword typology, features a blade forged in spring steel, which has been hardened in oil and tempered to a Rockwell hardness of approx. 48-52 HRC. The very wide fuller makes it flexible and lightweight. The sword comes with approx. 2 - Edges 2.5 mm thick and tip rounded and relatively wide, which makes it eligible for combat on stage.Like many surviving historical examples of the time, the pommel is a two-part construction: the trilobed upper section is fixed to the curved base by means of two rivets, and the complete spike of the blade is solidly hammered into the lid of the pommel.This sword is available with two different blade lengths (select the model you need from the drop-down menu: short = 64 cm / long = 74 cm). The short version is particularly ideal as a beginner's sword for fencers who are not yet very strong.Matching leather sheaths with sword belt (product no. ULF-SW-11SA or ULF-SW-11SB ) are available separately.Details:- Battle-ready sword category: SK-B Learn more about our classification for practical swords without cutting- Blade material: spring steel (high carbon steel, non-stainless), hardened and tempered- Rockwell Hardness: approx. 48-52 HRC- Cable material: leather-clad wood, handle and protection in cast steelDimensions Sword ULF-SW-12 A (short version)- Total length: approx. 80.5 cm- Blade length: approx. 64 /64.5 cm - Handle length: approx. 16 cm (handle approx. 10.5 cm)- Blade width in protection: approx. 4.6 cm- Blade thickness: approx. 4 mm (cutting edges approx. 2 mm)- Break-even point: approx. 10 cm from guard- Guard: approx. 12.5 cm long, 2 cm wide, 1 cm thick (center) / 2.5 cm thick (ends)- Weight: approx. 1140 g
€147.54
€184.43
Details View details  
Viking long sword, Petersen L type, uncut practice, SK-B - 1
  • -20%
Viking long sword, Petersen L type, uncut practice, SK-B
This battle-ready Viking sword was developed in close cooperation with fencing and martial arts instructor Volker Kunkel and his West-Coast-Institute. Unfortunately, Volker did not live to see the launch of this small series on the market. He passed away very early, in April 2021.The goal was to offer a sturdy, yet light and well-balanced sword, ready for battle, with a smaller budget. Here, Volker contributed his many years of experience as a fencing teacher, trainer, and traveling merchant in medieval markets. The Ulfberth® team and their blacksmiths have implemented these specifications and the result is a battle-ready Viking sword with a great value for money.Based on the original from 9 to 10 c. examples found in Britain and classified as Type L according to Petersen's Viking sword typology, features a blade forged in spring steel, which has been hardened in oil and tempered to a Rockwell hardness of approx. 48-52 HRC. The very wide fuller makes it flexible and lightweight. The sword comes with approx. 2 - Edges 2.5 mm thick and tip rounded and relatively wide, which makes it eligible for combat on stage.Like many surviving historical examples of the time, the pommel is a two-part construction: the trilobed upper section is fixed to the curved base by means of two rivets, and the complete spike of the blade is solidly hammered into the lid of the pommel.This sword is available with two different blade lengths (select the model you need from the drop-down menu: short = 64 cm / long = 74 cm). The short version is particularly ideal as a beginner's sword for fencers who are not yet very strong.Matching leather sheaths with sword belt (product no. ULF-SW-11SA or ULF-SW-11SB ) are available separately.Details:- Battle-ready sword category: SK-B Learn more about our classification for practical swords without cutting- Blade material: spring steel (high carbon steel, non-stainless), hardened and tempered- Rockwell Hardness: approx. 48-52 HRC- Cable material: leather-clad wood, handle and protection in cast steelDimensions Sword ULF-SW-12 B (long version)- Total length: approx. 90.5 cm - Blade length: approx. 74 /74.5 cm- Handle length: approx. 16 cm (approx. 10.5 cm tightness)- Blade width in protection: approx. 4.6 cm- Blade thickness: approx. 4 mm (cutting edges approx. 2 mm)- Break-even point: approx. Guard 15 cm- Guard: approx. 12.5 cm long, 2 cm wide, 1 cm thick (center) / 2.5 cm thick (ends)- Weight: approx. 1200 gSpecifications may vary slightly from part to part.The steel used here is not rustproof and may have slight surface stains in some places. We recommend that you do blade maintenance regularly, for example using Ballistol Universal Oil, which is ideal for taking care of steel.This is an original ULFBERTH ® product.
€147.54
€184.43
Details View details  
Infantry Saber (Peru)
  • -20%
Infantry Saber (Peru)
Infantry Saber
MANUFACTURED TO THE SPECIFICATIONS OF THE GOVERNMENT OF PERU.
 
All blades are stainless steel polished, engraved and finished to government specifications.
 
Includes hem.
€393.60
€492.00
Details View details  
Viking short sword, Petersen H type, uncut practice, SK-B - 1
  • -20%
Viking short sword, Petersen H type, uncut practice, SK-B
Viking sword, Petersen H type, various blade lengths, without sheathBattle ready (practical cut), SK-BThis battle-ready Viking sword was developed in close cooperation with fencing and martial arts instructor Volker Kunkel and his West-Coast-Institute. Unfortunately, Volker did not live to see the launch of this small series on the market. He passed away very early, in April 2021.The goal was to offer a sturdy, yet light and well-balanced sword, ready for battle, with a smaller budget. Here, Volker contributed his many years of experience as a fencing teacher, trainer, and traveling merchant in medieval markets. The Ulfberth® team and their blacksmiths have implemented these specifications and the result is a battle-ready Viking sword with a great value for money.Based on the original from 9 to 10 c. examples found in Birka, Sweden, and classified as Type H/I according to Petersen's Viking sword typology, features a spring steel forged blade, which has been hardened in oil and tempered with a Rockwell hardness of approx. 48-52 HRC. The very wide fuller makes it flexible and lightweight. The sword comes with approx. 2 - Edges 2.5 mm thick and tip rounded and relatively wide, which makes it eligible for combat on stage.Like many surviving historical examples of the time, the triangular pommel is a two-part construction: the complete spike of the blade is anchored to the lower section and the pommel cap is fixed to the base by means of two rivets.This sword is available with two different blade lengths (select the model you need from the drop-down menu: short = 64 cm / long = 74 cm). The short version is particularly ideal as a beginner's sword for fencers who are not yet very strong.Matching leather sheaths with sword belt (product no. ULF-SW-11SA or ULF-SW-11SB) are available separately.Details:- Battle-ready sword category: SK-B Learn more about our classification for practical swords without cutting- Blade material: spring steel (high carbon steel, non-stainless), hardened and tempered- Rockwell Hardness: approx. 48-52 HRC- Cable material: leather-clad wood, handle and protection in cast steelDimensions Sword ULF-SW-13 A (short version) - Total length: approx. 81.5 cm- Blade length: approx. 64 /64.5 cm- Handle length: approx. 17.5 cm (handle approx. 10.5 cm)- Blade width in protection: approx. 4.6 cm- Blade thickness: approx. 4 mm (cutting edges approx. 2 mm)- Break-even point: approx. 10 cm from guard- Guard: approx. 10 cm long, 2.5 cm wide, 1.7 cm thick- Weight: approx. 1250 g
€147.54
€184.43
Details View details  
Medieval sword with sheath - 1
  • -20%
Medieval sword with sheath
Reproduction of sword, made of metal with plastic cover and removable.The cross and the pommel of the sword bear a vulgar Latin inscription meaning: "Custody by a dragon that does not sleep, in the name of truth."The sword was usually the weapon of choice of medieval knights for combat. Its owners liked to customize it - some even received names - and was considered both a weapon and a symbol - the blade and cable are cross-shaped.
€100.12
€125.15
Details View details