Long bodice blouse, linen, natural color - 1
  • -20%
Long bodice blouse, linen, natural color
Blouse with medieval long bodice, linen, natural colorMade in GermanyThis blouse with very feminine bodice is made of linen and has a very comfortable fit. The long sleeves are equipped with elastic furrowed and can be pulled up or down to the desired length. The medieval blouse is also furrowed at the neckline and can be worn on the shoulder or closed at the front with a ribbon tie.
€63.23
€79.04
Round hand shell for practices - 1
  • -20%
Round hand shell for practices
Round hand shell, buckler style shell. It is quite sturdy and is perfect for training. The back has a handle to hold the shield by hand. These types of shields were used on the back to defend, accompanied by a sword in one hand.
Diameter: 30.5 cms.
€52.69
€65.87
Pugio Romano Silver - 1
  • -20%
Pugio Romano Silver
Made of carbon steel and wooden handle. brass guard and with handles. It includes matching sheath with brass finishes.
The Parazonium was used by high-ranking officials in the Roman legions as a sword assistant.
€79.04
€98.80
Details View details  
Medieval Knee Pads, Pair, 2 mm Steel, 15th Century
  • -20%
Medieval Knee Pads, Pair, 2 mm Steel, 15th Century
Medieval knee pads, pair, 2 mm steel, 15º C.Fully wearable reconstruction of protective knee covers (also known as poleyns or genouilleres), used in the 15th century. Made of 2mm thick steel, each poleyn is lined with a riveted layer of soft black suede and equipped with an adjustable leather strap with a brass buckle for a comfortable and personalized fit.Equally suitable for medieval reenactment, LARP, stage or costumes, these battle-ready knee protectors are best suited for late medieval scenarios and ideal for completing a European knight's armor.The ball joints are sold in pairs.Details:- Material: approx. 2 mm steel, suede lining and leather straps with bucklesBrass - Dimensions (B x H): approx. 15 x 14 cm- Bulge depth: approx. 6 cm- Weight (pair): approx. 920 gSpecifications may vary slightly from part to part.To ensure that this armor is suitable for you, remember to take your measurements on your gambeson and/or any piece of clothing or chainmail that you plan to wear underneath!The steel used here is not rust-proof and may have slight surface stains in places. We recommend that you maintain plate armor regularly, for example by using the universal Ballistol oil, which is ideal for steel care.
€63.96
€79.95
Leather scabbard for medieval sword, incl. Belt
  • -20%
Leather scabbard for medieval sword, incl. Belt
This beautiful sword scabbard is handmade from vegetable tanned leather, approx. 3 mm thick, and adorned with cross stitches on the back. It is reinforced with an additional layer of leather at the tip, and the rounded mouth is nicely finished with leather strings. The opening is about 4 cm wide.The scope of delivery includes a sturdy sword belt, which is connected to the scabbard in a very decorative way and equipped with a brass buckle. The many holes make it adjustable to a wide range of sizes.Ideal for medieval/Viking swords.Details:- Material: vegetable tanned leather (approx. 3 mm thick), brass buckle- Color: brown- Total length: approx. 91 cm- Maximum external width: approx. 6 cm- Belt length (fully stretched): approx. 105 cm- Belt width: approx. 3 cm- Weight: approx. 420 g- Suitable for swords with the following maximum blade measurements: approx. 88 cm blade length / approx. 4 cm blade width Specifications may vary slightly from piece to piece.
Keep in mind that leather is a natural product, and color and grain variations are quite normal. Each item is therefore unique, and the above photos are for reference only.
€108.24
€135.30
Persian Scimitar
  • -20%
Persian Scimitar
The original scimitar was called shamshir (meaning " lion's tail ") and had a highly curved blade that almost formed a semicircle. Developed in Persia, this type of blade was effective for making trailing cuts, but otherwise its usefulness was limited. This caused the blade to change shape to get a more useful version like the one in our project.
This is a beautiful and romantic sword from the Hank Reinhardt collection. The blade was quite effective in cutting and chopping, and the tip was quite useful in pushing the "hook". Manufactured from high carbon steel by Windlass Steelcrafts ®. The handle is made of wood and the protection and scabbard are made of steel.
The scabbard has a middle throat, neck, and metal tip.
SPECIFICATIONS :

Total length: 91cm
Blade length: 77 cm
Blade width: 2.8 cm
Blade thickness: 48mm
Weight: 780g
Material: 1075, high carbon steel
Edge: Sharp
€265.68
€332.10
Details View details  
Hospitable Tabardo / Alexander Overcoat for Children, black/natural color - 1
  • -20%
Hospitable Tabardo / Alexander Overcoat for Children, black/natural color
Tabards were used by many knights to identify themselves as crusaders. The coat of arms on them (also called Surcoat or Surcot) appeared in the 12th century and was worn by the knights over their armor or mesh dimension on the battlefield. With the colors and the cross made it clear in the battle fight who was a friend and who was the enemy.
This calf-length tabarde for children is made entirely of strong cotton. It is cut straight and with lateral slit up to the waist. The front and back are also provided with a slightly shorter slit in the middle. The classic Johanniter cross is stamped on the chest.
€26.35
€32.93
Medieval shirt - 1
  • -20%
Medieval shirt
Last items in stock
The wide-cut shirt has a Kent collar and a button-down pout with original wooden buttons. In the front and rear shoulder yoke, as well as in the sleeves are ruffled. The handcuffs are closed with a tonal button. The shirt is made of fine cotton fabric and has a subtle fabric structure.
€38.99
€48.74
Viking Valhalla Hand Axe - 1
  • -20%
Viking Valhalla Hand Axe
Last items in stock
The axe head on the Condor Valhalla Knife Axe and Tool is made of 1060 high carbon forged steel and is heat treated and seasoned with about 50-55 Rockwell hardness. The natural finish is a bare metal look that has the appeal of a pair of well-worn jeans. This finish is a perfect manual hammering process and gives a classic and enhanced look to an already well-made tool.
€100.12
€125.15
Details View details  
Medieval Battle Gauntlets, Battle of Visby, 14th c., various colors
  • -20%
Medieval Battle Gauntlets, Battle of Visby, 14th c., various colors
Medieval Battle of Visby Gauntlets, 14th c.Steeland leather, various colorsThese gauntlets are based on a find from the site of the battle of Korsbetningen (Gotland Island, Sweden), just outside the city walls of Visby, where an army of Gutnish farmers and peasants fighting against the Danish conquest of Gotland was crushed by the forces of King Valdemar IV of Denmark (Valdemar Atterdag) on 27 July, 1361.The battle gauntlets we offer here are made of 2mm thick leather and 1.2mm steel. The upper leather features riveted metal plates that entirely cover the back of the hand and the five fingers. It is riveted into an inner sleeve made of supple leather. The long riveted leather cuff is reinforced with oblong steel plates on the inside and equipped with an adjustable leather strap and a brass buckle for a comfortable and personalized fit on the wrist.This pair of articulated leather and plate grips offers a combination of safety, freedom of movement and comfort of use. It is best suited for late medieval settings and particularly suited to the depiction of a 14th-century Northern European warrior. An ideal accessory for reconstitution and LARP!Details:- Material: genuine leather, steel- Available colors: black or brownClear- One size fits all (glove size approx. 9 to 10, large enough for sturdy hands)- Weight (pair): approx. 1750 gSpecifications may vary slightly from part to part.The steel used here is not rust-proof and may have slight surface stains in places. We recommend that you regularly maintain steel parts, for example by using the universal Ballistol oil, which is ideal for steel care.
€206.64
€258.30
Belted scabbard and bronze buckle for Viking sword
  • -20%
Belted scabbard and bronze buckle for Viking sword
This beautiful elaborately crafted scabbard for Viking swords is made of wood, bound in leather, and fitted with a steel plate. The opening is about 4.5 cm long.The scope of delivery includes a sturdy sword belt made of 3 mm thick leather, which is connected to the scabbard in a very decorative way. The belt is adorned with cross-stitches, and the many holes make it adjustable to a wide range of sizes. A bronze buckle shaped like twin snakes or dragons—a recurring motif in Norse/Viking—adds to the already beautiful overall look.This scabbard is available in two different lengths to match our practical swordsBlunt Vikings - ULF-SW-11- ULF-SW-12- ULF-SW-13Select the model you need from the drop-down menu: short = for swords 11A, 12A, 13A / long = for swords 11B, 12B, 13B.Of course, it is also suitable for other blades with a similar size.Details:- Material: Wooden core with leather cover, leather belt, brass buckle, chape- Belt length, fully stretched: approx. 205 cm (long strap 175 cm + short strap 30 cm) - Belt width: approx. 5.5 cmDimensions Sheath ULF-SW-11SA (short version)- Total length: approx. 72 cm- Maximum external width: approx. 6.5 cm- Weight: approx. 870 g- Matching scabbard for Viking swords ULF-SW-11A / ULF-SW-12A / ULF-SW-13A,and also suitable for swords with the following maximum blade measurements: approx. 64 cm blade length / approx. 4 cm blade width / approx. 4 mm thickness
€83.64
€104.55
Templar Wire, Model 6 - 1
  • -20%
Templar Wire, Model 6
Size 4.90 cm
Zinc Material
Golden Bathroom
Weight 15.00 g
€3.16
€3.95
Unisex Period Shirt - 4
  • -20%
Unisex Period Shirt
Last items in stock
Pourpoint Godfrey, black

The Pourpoint is a lightly lined vest with 16th century lace sleeves, which, depending on the user's fortune, was simple or richly decorated and sometimes made of fine fabrics. The version offered here has the possibility to fit the individual hoses. at the bottom hem and is made of heavy cotton fabric.

Details:
- Material: 100% cotton
- Weight: approx. 0.6 kg
€79.04
€98.80
Viking Valhalla Hand Axe - 2
  • -20%
Viking Valhalla Hand Axe
The axe head on the Condor Valhalla Knife Axe and Tool is made of 1060 high carbon forged steel and is heat treated and seasoned with about 50-55 Rockwell hardness. The natural finish is a bare metal look that has the appeal of a pair of well-worn jeans. This finish is a perfect manual hammering process and gives a classic and enhanced look to an already well-made tool.
€126.46
€158.08
Details View details  
Roman helmet, with lining - 2
  • -20%
Roman helmet, with lining
Last items in stock
Replica of a Celtic helmet approx. 300 - 200 b.c.
These helmets were mainly used in the Alpine and northern Regions of Italy. There was probably horse hair tied to the peak of the helmet.
Delivery includes a comfortable leather inlay.
€173.89
€217.36
"Takeda Shingen Kabuto" Helmet - 1
  • -20%
"Takeda Shingen Kabuto" Helmet
Handmade by Hanwey with the quality of museum reproduction.
Main features:- Functional replica
- Includes support.
€843.09
€1,053.86