Vergil is Dante's twin brother. He is the main antagonist in Devil May Cry 3, as well as a playable character in the Special Edition of the game. After he is betrayed by Arkham at the end of the game's second act (the end of mission 13), he temporarily joins Dante near the end, before returning to his villainous role. Throughout the game, Vergil seeks to undo Sparda's seal within the Temen-ni-gru and claim all of his father's power for himself, regardless of the effects it will have on the human world. To do this, he needed half of his mother's amulet from Dante, so he lured his brother with the intention of taking it by force. Vergil fights Dante three times in the storyline of Devil May Cry 3. Their first battle is at the highest level of Temen-Ni-Gru, where Dante is defeated by Vergil, who then takes Dante's amulet. Their second battle is at the bottom of the tower, where the twins fight to a draw before their battle is stopped. Their final battle is near the entrance to the demonic realm, where Vergil is ultimately defeated.Virgil's sword, the Yamato, is used by Nero in Devil May Cry 4, being restored when Nero's inner demon awakens. Dante attempts to retrieve the Yamato from Nero, stating that the sword was his brother's, originally used to seal the gate between the kingdoms, and that it needed to remain in the family. In the end, Dante trusts Nero to keep Yamato confident.This is an authentic replica of the Yamato- Vergil's sword. The handle is made of hardwood, wound with white cord. The guard and handle are made of brass.A custom black sheath is within the scope of delivery.Details:Total length: approx. 108 cmBlade length: 65.5 cmCable length: 26.5 cmWeight: 1 kgBlade Material: SteelCarbon Handle: White cord wrapped with brass guard and handleHandle Material: Hardwood
This sword is forged by hand

Enma is one of the 21 swords of O Wazamono's grade. It was once wielded by Kozuki Oden alongside his other sword, Ame no Habakiri, and is one of only two weapons known to have injured Kaido.After Oden's death, Enma was inherited by his daughter, Kozuki Hiyori. Hiyori would later gift the sword to Roronoa Zoro in exchange for allowing Shusui, a national treasure, to remain in Wano.Details:Total length: 103cmBlade length: 71cmSaya Length: 74cmCable length: 28cmBlade width: 3.2cmBlade material: 1045 carbon steel, honedHandle Material: Wood Wrapped with Ring HandleWhite plastic Saya material: hard wood, black laquecered with ringWhite Plastic Ito and Sea: BlackTsuba: BronzeAccessories: Zinc Alloy
Weight: 1.2kgAttention:The stand shown in the 1st photo is not included in the delivery.Inclusive support (2nd photo) and kit. This sword is hand-forged and bent and has a sharp blade.

Dark Blue Medieval Linen Tunic – TunicViking Details:- Material: 100% linen- Available sizes: S, M, L, XL, XXL- Overall length size L: approx. 100 cm (measured from the center of the neck to the bottom hem)- Care instructions: hand wash onlyThis dark blue medieval linen tunic is the perfect piece for medieval markets, LARP, and reenactment events. Made from 100% linen, the tunic is comfortable to wear and has a natural cooling effect, making it ideal for hot summer days.The tunic has a classic round neckline with a central front slit. This can be used open or closed with a fibula, depending on your preference. There are also side slits for easy movement and comfort. The natural texture of the linen fabric gives the tunic an authentic and rustic look, making it perfect for a variety of medieval or Viking clothing.This versatile medieval tunic can be worn alone or paired with a matching top for added warmth. For a complete Viking look, we recommend pairing the tunic with a sturdy leather belt.Order now and complete your look with this authentic tunic!



Size chart - Men - Tunic






Size
S
M
L
XL
XXL
3XL


Chest circumference (in cm)
92
100
108
116
120
138







How to find the right size:To take your body measurements correctly to determine your clothing size, always wrap the tape measure horizontally around your body at the widest part. For tank tops, sizes are based on chest circumference.If you fall between two sizes, we recommend that you increase one size.The facility is included in the standard and reflected in the final measurements.Please note:Delivery includes only the tunic! The other items pictured above are available separately in our online store.As authentic as possible, as modern as possible!This Viking tunic is part of Battle-Merchant's line of period clothing and medieval clothing for men, women, and children. From the first sketch to the last point, This piece was planned, designed and handcrafted with special attention to detail. Our clothes are modeled (sometimes accurately, sometimes less) on historical examples, grave finds, and original museum pieces, where they exist. We always strive to keep the necessary adjustments to current standards to a minimum, for example in terms of size and manufacturing process. See for yourself!

Medieval Kragelund Askur Tunic, BlackThe look and cut of this tunic are based on archaeological finds dating back to the 11th century. However, it is not an individual reproduction.Nederfrederiksmose Man, also known as <,i>Kragelund Man or Fredriksdal Man, was found in 1898 near the town of Kragelund, Denmark. It was the first bog body photographically documented at the site of discovery. He wore a tunic, short leather boots, and bare-legged.Our knee-length tunic is made of sturdy cotton canvas and adorned with hand-sewn ornamental stitches. It is elaborately finished and designed as an outer garment. So-called buds (wedge-shaped pieces of fabric) inserted into the front and back center panels and side seams give the tunic a beautiful shine from the hip down. The unconventional tailoring of the sleeves shows the combination of wide arms and regular forearms.This tunic is ideal for the portrait of the Nordics. For an authentic look, we recommend that you wear it with a leather belt.Details:- Available sizes: S, M, L, XL, XXL- Color: Black (also available: olive green, wine red)- Material: 100% cotton- Total length size L: approx. 119 cm(measured from the center of the neck to the bottom hem)- Care instructions: Machine wash at 40°C, gentle cycle, do not tumble dry



Size chart - Men - Tunic






Size
S
M
L
XL
XXL
3XL
5XL


Chest circumference (in cm)
92
100
108
116
120
130
158







How to find the right size:To take your body measurements correctly to determine your clothing size, always wrap the tape measure horizontally around your body at the widest part. For tank tops, sizes are based on chest circumference.If you fall between two sizes, we recommend that you increase one size. The facility is included in the standard and reflected in the final measurements.Please note:Delivery includes only the tunic! The other items pictured above are available separately in our online store.As authentic as possible, as modern as possible!This Viking tunic is part of Battle-Merchant's line of period clothing and medieval clothing for men, women, and children. From the first sketch to the last stitch, this piece was planned, designed and handcrafted with special attention to detail. Our clothes are modeled (sometimes accurately, sometimes less) on historical examples, grave finds, and original museum pieces, where they exist. We always strive to keep the necessary adjustments to current standards to a minimum, for example in terms of size and manufacturing process. See for yourself!

Details:- Material: 100% Linen (240 g/m²)- Available sizes: S, M, L, XL, XXL- Overall length size L: approx. 100 cm (measured from the center of the neck to the bottom hem)- Care instructions: wash onlyBy hand This medieval linen tunic is the perfect garment for medieval markets, LARP, and reenactment events. Made from 100% linen, the tunic is comfortable to wear and has a natural cooling effect, making it ideal for hot summer days.The tunic has a classic round neckline with a central front slit. This can be used open or closed with a fibula, depending on your preference. There are also side slits for easy movement and comfort. The natural texture of the linen fabric gives the tunic an authentic and rustic look, making it perfect for a variety of medieval or Viking clothing.This versatile medieval tunic can be worn alone or paired with a matching top for added warmth. For a complete Viking look, we recommend pairing the tunic with a sturdy leather belt.Order now and complete your look with this authentic tunic!



Size chart - Men - Tunic






Size
S
M
L
XL
XXL
3XL


Chest circumference (in cm)
92
100
108
116
120
138







How to find the right size:To take your body measurements correctly to determine your clothing size, always wrap the tape measure horizontally around your body at the widest part. For tank tops, sizes are based on chest circumference.If you fall between two sizes, we recommend that you increase one size.The facility is included in the standard and reflected in the final measurements.Please note:Delivery includes only the tunic! The other items pictured above are available separately in our online store.As authentic as possible, as modern as possible!This Viking tunic is part of Battle-Merchant's line of period clothing and medieval clothing for men, women, and children. From the first sketch to the last stitch, this piece was planned, designed and handcrafted with special attention to detail. Our clothes are modeled (sometimes accurately, sometimes less) on historical examples, grave finds, and original museum pieces, where they exist. We always strive to keep the necessary adjustments to current standards to a minimum, for example in terms of size and manufacturing process. See for yourself!

English Warhammer, WindlassDetails:- Made by Windlass Steelcrafts- Head Material: SteelCarbon - Shaft material: woodwalnut- Total length: approx. 64 cm- Head length: approx. 16.2 cm- Cable length: approx. 17 cm / whole shaft approx. 57.3 cm- Shaft thickness: approx. 3 x 2 cm- Max. Head Width: Approx. 2.5cm- Weight: approx. 731 gWith the increased robustness of plate armor, the sword became less and less effective against a fully armored knight. Hammers, axes, and maces soon became the weapon of choice for mounted knight hand-to-hand combat. The war hammer evolved rapidly and became one of the main weapons. Generally, it was lighter and faster than mace. It was often made a little longer so that the range could be extended, but also shortened if necessary. This warhammer is expertly replicated from a private collection.About 1430This decorative war hammer is the perfect addition to your collection.Order now and get an unrivaled hammer!

This Cinquedea , short sword or large dagger of Italian origin with a broad blade, belongs to the Royal Armouries . This design has a longer blade and dates from around 1500–1530.
Although the Cinquedea was often carried as a weapon by civilian personnel, and some were highly decorated, this design is relatively simple and functional, and could have been carried as a military weapon by an infantryman or gunner.
The impressively wide 66 cm blade hasa complex transition from three to two flutes, with a thin and conical cross-section distally, making it a very light and fast weapon for its size. 
Our Cinquedea is a faithful replica of all aspects of this sword in terms of shape and specifications, the most interesting being the unique construction of the hilt. The ingenious and iconic design of the guard is made with various components welded together, just like the original. The base of the blade extends completely through the guard and is attached to it (see photos). The blade base and rivet heads are ground flush with the guard and the entire assembly is polished. This method offers exceptional strength and durability. The blade also features a full-profile tang, with scales on the wooden hilt and decorative brass rivets inlaid with filigree.
The scabbard is made with a wooden body and covered in leather. The tip is reinforced with a brass ferrule. At the mouth of the hem, the leather extends upwards and covers part of the guard.
Manufactured by Windlass Steelcrafts, the original can be seen in the Royal Armouries Collection, Number IX.148.
Includes Certificate of Authenticity.
SPECIFICATIONS :

Total length : 80cm
Blade length : 66 cm
Width of the Ricasso blade : 8 cm
 Distal cone blade: 0.23 cm 
Weight: 1.045g
Material: High Carbon Steel, 1075
Edge: Double edge with bevel, not sharp
Balance point : 11.7 cm from the guard


Manufactured by Windlass Steelcrafts®
 
Official product licensed by Royal Armouries. The name Royal Armouries is a registered trademark of Royal Armouries.  All rights reserved. The Royal Armouries is the National Museum of Arms and Armor of the United Kingdom.
 


















 
GOODSBERMEJO
MARTO




Battle Cry
TEMPLARS
NEWS
REEL





LEGAL NOTICE
COOKIES POLICY
PRIVACY POLICY


 
SOCIAL MEDIA
  
    

An impressive longsword or imposingly large hand-and-a-half sword, probably from the late fourteenth century.
The precise origin of this European sword is unknown, but based on the markings it is likely to be of German or possibly Italian origin . It arrived at the Alexandria Armory as a diplomatic gift, war booty or as an object of homage from the Kingdom of Cyprus to the Sultanate of Egypt, where it bore an inscription in Arabic. From then on it became part of at least one private collection, before being subsequently acquired by the Royal Armouries.
The sword of this great knight features a wide and powerful Oakeshott Type XVI blade of 97 cm. It is a rather heavy sword by the standards of the time, due to the length and width of the blade, but it is wonderfully balanced thanks to the distal cone, long hilt and large hilt. Swords similar to this one can be seen widely in late fourteenth- and early fifteenth-century art, including manuscripts and also on chivalric effigies and bronzes.
Swords like this were very popular at the time throughout Europe, from England to Italy, from Portugal to Poland, and appear in several contemporary fighting treatises such as the Fior di Battaglia de Fiore delli Liberi (1410). They were worn on foot and on horseback, with or without armor, with one or two hands. This example is an especially powerful slashing weapon and less specialized in thrusts than other longswords of the time.
The scabbard is made with a wooden body and covered in leather. The tip is reinforced with a brass ferrule. At the mouth of the hem, the leather extends upwards and covers part of the guard.
Our replica matches the original in every aspect of shape, measurement, and workmanship.
Manufactured by Windlass Steelcrafts, the original can be seen in the Royal Armouries Collection, Number IX.915.
Includes Certificate of Authenticity.
SPECIFICATIONS :

Total length : 123cm
Blade length : 97 cm
Width of the Ricasso blade : 5 cm
 Distal cone blade: 0.39 cm 
Weight : 1.420g
Material: High Carbon Steel, 1075
Edge: Double edge with bevel, not sharp
Balance point : 9.3 cm from the guard


Manufactured by Windlass Steelcrafts®
 
Official product licensed by Royal Armouries. The name Royal Armouries is a registered trademark of Royal Armouries.  All rights reserved. The Royal Armouries is the National Museum of Arms and Armor of the United Kingdom.

Sword of the Royal Armoury  #IX.1426 .
This knight's sword from the Royal Armouries Collection dates from the late fifteenth century and is possibly of English origin .
This type of sword is a hand-held weapon, of medium to high status, from the late fifteenth and early sixteenth centuries, and would have been used both with and without armor. It would have been a reserve weapon for horsemen, used in combat both on foot and on horseback.
This sword shares some obvious similarities with the Westminster Abbey sword , which has long been associated with Henry V (but is now believed to have come from the funerary remains of Henry VII). It also shares a number of similarities with other English church swords and with depictions of swords in English funerary effigies and bronzes. Due to the state of preservation, it has been suggested that this sword may have been taken from an English church monument in centuries past, where it was probably originally deposited in the late fifteenth century.
Our replica is accurate and faithful, of traditional manufacture, very similar to the original. It has a robust Oakeshott Type XVIII blade measuring just over 79 cm, cutting and pushing, long and curved blades with characteristic terminals, short handle and prominent solid wheel knob. The original has an unusual floral engraving at the base of the blade, which we do not reproduce, because unfortunately in the original it is too damaged to be reproduced with certainty.
The scabbard is made with a wooden body and covered in leather. The tip is reinforced with a brass ferrule . At the mouth of the hem, the leather extends upwards and covers part of the guard.
Manufactured by Windlass Steelcrafts, the original can be seen in the Royal Armouries Collection, Number IX.1426.
Includes Certificate of Authenticity.
SPECIFICATIONS :

Total length : 95cm
Blade length : 78 cm
Width of the Ricasso blade : 4 cm
 Distal cone blade: 0.07 cm 
Weight: 970g
Material: High Carbon Steel, 1075
Edge: Double edge with bevel, not sharp
Balance point : 9.3 cm from the guard


Manufactured by Windlass Steelcrafts®
 
Official product licensed by Royal Armouries. The name Royal Armouries is a registered trademark of Royal Armouries.  All rights reserved. The Royal Armouries is the National Museum of Arms and Armor of the United Kingdom.

The original scimitar was called shamshir (meaning " lion's tail ") and had a highly curved blade that almost formed a semicircle. Developed in Persia, this type of blade was effective for making trailing cuts, but otherwise its usefulness was limited. This caused the blade to change shape to get a more useful version like the one in our project.
This is a beautiful and romantic sword from the Hank Reinhardt collection. The blade was quite effective in cutting and chopping, and the tip was quite useful in pushing the "hook". Manufactured from high carbon steel by Windlass Steelcrafts ®. The handle is made of wood and the protection and scabbard are made of steel.
The scabbard has a middle throat, neck, and metal tip.
SPECIFICATIONS :

Total length: 91cm
Blade length: 77 cm
Blade width: 2.8 cm
Blade thickness: 48mm
Weight: 780g
Material: 1075, high carbon steel
Edge: Sharp

Back by popular demand! There is no known historical name for this unique sword. It appears in the Maciejowski Bible, a medieval manuscript illustrating biblical stories with medieval clothing and weapons. This weapon also appears in other manuscripts of the time. Our drawing can be seen on plaque 21 entitled The Rescue of Lot.
The single-edged blade is wide and flat. The Two-handed grip offers a huge surface area to generate force in case of leverage. Hand-forged from high carbon steel by Windlass Steelcrafts® with wooden scales and aged copper fittings. This single-edged knife has been hand-forged from high-carbon 1075 steel.
SPECIFICATIONS :

Total length: 81cm
Blade length: 49 cm
Blade width: 9cm
Blade thickness: 48mm
Weight: 1.680g
Material: 1075 High Carbon Steel
Edge: Sharp

Leather-reinforced Gambeson with detachable buckles and sleeves, natural/brownDetails:Outer material: 330gsm canvas made of 100% cottonLining: 100% cotton- Padding (padding): 100% polyesterLeather details (contains non-textile parts of animal origin)Available sizes: S, M, L, XL, XXL- Total length in size L: approx. 85 cm (measured from the highest point of the shoulder)- Collar height: approx. 10 cm- Color: natural/brown (also available: black)A gambeson is almost indispensable for free and exhibition fights. The gambeson, also called the gambison, armored doublet, or aceton, was worn under chain or plate armor in the Middle Ages. It increased the wearing comfort of the knight's armor and was also able to absorb the blows of opponents and thus reduce the risk of injury.This gambeson from Ulfberth is made of three layers of fabric: an outer layer of cotton fabric (canvas), a layer of polyester padding, and a cotton inner lining. The padding on the upper body is diamond-shaped. At the waist, the padding is horizontal and in the hip region and arms, the padding is vertical. The gambeson is closed with leather straps and metal straps in the center of the front. The stitched leather details reinforce particularly stressed areas. The sleeves are secured with nest straps and can be removed as desired. The high collar greatly increases the comfort of wearing armor or chainmail pieces on the neck.



Size chart - Men - Top






Size
S
M
L
XL
XXL


Chest circumference (in cm)
92
100
108
116
120







How to find the right size:To determine your dress size based on your body measurements, measure horizontally at the widest point. For tank tops, use your chest circumference as a guide. If you are between two sizes, we recommend that you choose the larger one. Convenience allowances are included in the cut.

Elden Ring sword straight sworn sword, unofficial replica, with a total size of 96.5 cm with black steel blade, burgundy synthetic leather cord handle, handle and cross with gold finish, with brown synthetic leather scabbard.
Overall size: 96.5 cmBlade size: 72 cmBlade thickness: 3.7 mmCape: WiredSupport: NoWeight: 1216 gr

Elden Ring sword Rogier's rapier, unofficial replica, with a total size of 94 cm with a steel blade with gold decoration, golden metal handle, handle and cross with a gold finish, with a brown synthetic leather scabbard.

Overall size: 94 cmBlade size: 69 cmBlade thickness: 3.7 mmCape: MetallicSupport: NoWeight: 988 gr

The appearance and cut of this tunic are based on an archaeological find dating back to the 11th century. In 1984, during excavations in Viborg (Denmark), a bundle of fabric glued to canvas was discovered. As it turned out, these were individual fragments that could be put together to form a tunic. Only the back and sleeves have not been preserved in their entirety and leave a bit of room for interpretation.The tunic has a very elaborate and unique cut for the time. The upper part of the fuselage is worked in two layers at the front and back and has a rectangle from which the seams protrude diagonally. The neckline is equipped with two slits and drawstrings. The arm ball is cut straight and is complemented by a reinforcement in the armpit area. The sleeve is made up of a total of three pieces of pattern and tapers towards the hem. The side seams are slit, with the back reaching a few inches above the front, covering the top of the slit.Our cotton tunic is a unique reconstruction of the Viborg tunic of the Middle Ages. We place special emphasis on the correct cut of the dividing seams, the finishing in the details and the correct proportions. We have slightly lengthened the total length of the torso and sleeves for aesthetic reasons. Thus, our Viking tunic has long sleeves and the hem ends at the thigh height. The elaborate tunic can be worn as both an upper and lower tunic. The fabric (100% cotton) is medium firm and double-layered in the torso area.The tunic is the perfect cloak for all Nordics. For an authentic outfit, we recommend pairing it with a belt, calf wraps, and ear pants.Details:- Available sizes: S, M, L, XL, XXL- Color: Wine red (also available: natural, green, dark blue)- Material: 100% cotton- Total length in size L: approx. 100 cm (measured in the center of the back)- Care instructions: Machine wash at 40°C, gentle cycle, not suitable for tumble drying



Size chart - Men - Tunic






Size
S
M
L
XL
XXL
 


Chest circumference (in cm)
92
100
108
116
120
 







How to find the right size:- To determine your dress size based on your body measurements, measure horizontally at the widest point.- For tank tops, use your chest circumference as a guide.- If you are between two sizes, we recommend that you choose the larger size.- Convenience allowances are included in the cut.Attention:Only the tunic will be sold! The other items are available separately in our online store.

Details:
Outer material: 100% cotton canvas 330gsm
- Inner lining: 100% cotton
- Filling (filling): 100% polyester
- Available sizes: M, L, XL, XXL
- Total length for size L: approx. 75 cm (measured from the highest point of the shoulder)
- Price: brown/black

A gambeson, also known as a doublet or aketon, is almost indispensable for free and exhibition combat. The gambeson was worn under chain armor and plates in the late Middle Ages. It made the knight's armor more comfortable to wear and could also absorb enemy blows, thus reducing the risk of injury.

This gambeson from Ulfberth is made of two layers of fabric: an outer layer of cotton fabric (canvas), a polyester filling/filling layer, and a cotton inner lining. The vertical seam secures the padding and increases wearing comfort. The gambeson is closed with straps, which are fixed on the inside and are therefore not noticeable. Slits at the sleeve hem and side seam increase wearing comfort.
This gambeson can also be worn as a winter coat.

Be your own hero with the Key to the City. The Keyblade kingdom key pictured is a finely crafted video game replica doing justice to Squaresoft's incredible PS2 hit, Kingdom Hearts.

Details:
Total length 106 cm
Cable length: 16 cm
Blade length: 76 cm
Balance point: 10 cm below the guard
Weight: 1060 g

Norman Helmet for Kids, PlasticFor a perfect performance as a noble knight at medieval markets, LARP events, costume parties, carnivals, or just for simple romps at home, it goes without saying that any little warrior needs a grandiose-looking knight's helmet. Nasal helmets, also known as Norman helmets, were also very popular among the Vikings.This children's nasal helmet is made of high-quality plastic. It is very light and odorless. It has an authentic and realistic look that mimics the helmet of an aged, battle-worn knight. If necessary, for additional protection, it also provides enough space inside for a lid or similar. It should also fit adults of smaller and small stature.This toy helmet is intended solely for fantasy purposes and does not provide protection against blows or shocks of any kind.Details:- Material: plastic- Dimensions: approx. 19 x 17 x 16 cm- Weight: approx. 125 g- Color: Steel with brass trims

Whether defending your castle or battling the fearsome dragon, this sword is the perfect toy weapon for all little adventurers and explorers. After all, a true knight never leaves his castle without the right sword. Along with a knight's helmet and shield, the sword is part of the basic equipment of every noble knight and brave warrior.The wooden hilt of the Bihänder Knight's Sword is ergonomically shaped for a secure and comfortable grip, and the crossguard is decorated with a beautiful rivet. A real eye-catcher is the black/silver blade, which gives it the appearance of a real knight's sword.With this sword, every carnival, costume party, medieval market, or playground can be transformed into a stage for your child's heroic deeds.Details:- Material: wood (painted)- Total length: approx. 110 cm- Blade length: approx. 83 cm- Weight: approx. 380 gSpecifications may vary slightly from part to part.This wooden sword is a toy suitable for ages 5 and up.

Encased in Jute An essential part of any true hero's costume, the axe goes hand in hand with the helmet and shield, and no Viking or brave adventurer should leave camp without one!This sturdily made wooden toy axe features a jute-wrapped handle that gives little hands a better grip. The axe head is painted metallic silver to give it an extra air of authenticity.With this in mind, every carnival, costume party, medieval market, or playground can be turned into a stage for your child's heroic deeds. And if Mom and Dad need "help" when working in the garden or building a camp in the woods, this axe is also a great gaming tool!Details:- Material: wood (painted), handlejute-coated - Total length: approx. 51.5 cm- Axis: approx. ca. 48 x 3.5 x 1.2 cm- Weight: approx. 230 gSpecifications may vary slightly from part to part.This wooden axe is a toy suitable for ages 3 and up.

Little Archer Children's Archery Set, 30 in.The Little Archer Archery Set for Kids 4 Years and Older consists of a sturdy wicker longbow, 2 wooden arrows, a paper bullseye face and a shooting instruction sheet.The child's bow has an integral arrow rest (shelf) on both sides and is therefore suitable for small left-handed and right-handed archers. The arrows are feathered with natural feathers and equipped with a plastic tip and a blunt metal sheet tip.Details:Scope of delivery:- 1 bow- 1 ropeBow - 2 arrows- 1 sideTarget - 1 instruction sheetBow:- Material: rattan, natural color- Overall length: 30 in. (approx. 80 cm)Pull Length: 14 in.- Pulling weight: approx. 8 to 10 lbs - Height of theStrap: 4.5 - 5 in.- Ambidextrous arrows:- Material: wooden rod, plastic fitting, metal tip, genuine feathers- Overall length: approx. 20 in. (51 / 54 cm)- Fletching: approx. 3 in. (7.6 cm)

Children's Bow with 3 Arrows, Wooden Toy, approx. 120 cmWith this fantastic wooden bow, archery becomes child's play!Thanks to the aiming hole in the bow, even the smallest archers will be able to hit their targets safely. The included suction cup arrows don't hurt anything and ensure safe fun.With this large wooden bow for kids, little rangers will be ready for any adventure – including children's birthday parties, carnivals, and shooting contests.Carefully crafted wood-shaped bow made of solid ash wood with plastic cord.Details:- Includes three arrows with suction cups- Length: approx. 120 cm- Weight (bow and arrows): approx. 250 gThe children's bow is a toy and is suitable for ages 8 and up.

This wooden crossbow is the ideal toy for all little adventurers and explorers.Become a hero and defend your castle or fortress against bandits and robbers from a safe distance. With this beast, every carnival, costume party, medieval market, or playground can be transformed into a stage for heroic deeds.The toy crossbow is made of pine/spruce wood and is delivered with three arrows with suction cups.Details:- Total length: approx. 57 cm- Weight: approx. 570 g- Arrow length: approx. 19 cmSpecifications may vary slightly from part to part.

Red Dragon Fencing Mask, 350NThe Red Dragon Fencing Mask is one of the most popular masks on the HEMA market and represents an excellent value for beginners. This durable mask is suitable for long-sword sparring and most other HEMA activities. It comes in "HEMA black" and has a removable red lining (hand wash only). The bib is rated at 350N.The sizing of fencing masks is based on the vertical circumference of the head.Measure your face by taking a tape measure, holding it under your chin with your mouth slightly open, under your jaw, through your ear, down the top of your head, past your other ear, and down to the bottom of your chin (where you started from).Measurement around the face- S: 56-59cm- M: 61-64cm- L:66-69cm- XL: 73-76cm

Wall mount for eight Samurai swords.Made of stained wood.Details:Width: approx. 34 cmHeight: approx. 100 cmMaterial: Stained wood

This wall mount was made of solid wood and is suitable for two samurai katanas.Details:Width: 42 cmHeight: 23 cm