Gothic Flaps, Arm Guards with Pointed Couters, 15º c., 1.5 mm Steel, Pair
  • -20%
Gothic Flaps, Arm Guards with Pointed Couters, 15º c., 1.5 mm Steel, Pair
Gothic Bulbs, Arm Guards with Pointed Couters, 15º c., 1.5 mm Steel, PairThis wearable hinged reconstruction of a late medieval plate armor for the arms is modeled on a 15th-century German original (ca. 1465). It is made of 1.5 mm thick steel and darkened on the inside for better corrosion resistance. It is designed to protect the forearms, elbows, and lower arms.Arm protection consists of a very pointed couter or cowter (also known as an elbow cop), a two-piece tubular (hinged) vamp or lower barrel for the forearm, and a tubular semi-rebrace or upper barrel (closed with rivets) for the arm. The three elements are connected to each other by sturdy leather straps that are riveted on the inside and allow adequate freedom of movement. Two holes positioned on the top edge of the rebrace allow for proper attachment to a shoulder piece (shoulder pad) or to a gambeson (braided cords with brass tips are included in the scope of delivery).Equally suitable for historical reenactment, LARP, or fantasy, this articulated arm armor is ideal for late medieval and Renaissance settings and will make your portrait of a proud knight perfect!Sold as a pair.Details:- Material: 1.5mm steel, leather straps, cotton cords with spikes Brass - Total length: approx. 49 cm- Inner diameter at arm: approx. 14 cm- Inner diameter at wrist: approx. 9 cm- Elbow tip length: approx. 11 cm- Leather straps: approx. 3 mm thick, 19 cm long, 2 cm wide- Weight (pair): approx. 5 kgSpecifications may vary slightly from part to part.Please note:To ensure that this armor is the right fit for you, remember to take your measurements on your gambeson and/or any garments or chainmail you may plan to wear underneath!The steel used here is not rust-proof and may have slight surface stains in places. We recommend that you maintain plate armor regularly, for example by using the universal Ballistol oil, which is ideal for steel care.
€196.80
€246.00
Gothic Knee & Leg Protection, Steel 1.6 mm, Pair
  • -20%
Gothic Knee & Leg Protection, Steel 1.6 mm, Pair
Last items in stock
Gothic Poleyns & Cuisses, Knee & Leg Protection, 1.6mm Steel, PairThis fully articulated reconstruction of a late medieval plate armor for the legs is designed to protect the legs from the thighs to below the knees, and shows the typical multi-layered appearance of the Gothic plate armor of the late Middle Ages (15th/16th c.). It is made of 1.6 mm (16 gauge) steel and blackened on the inside for better corrosion resistance.Leg armor consists of poleyns (knee pads, also known as genouilleres), cuisses, and short greaves. For adequate freedom of movement, all parts are connected to each other by sliding plates or lames that are hinged on sturdy steel rivets. The cuisses have curled edges, and the poleyns feature slightly concave, flower-shaped steel rondels that are riveted on the sides.On the back, each leg is equipped with three adjustable riveted leather straps approx. 3 mm thick with brass buckles for a comfortable and personalized fit.Equally suitable for medieval re-enactment, LARP, stage, TV/film or fantasy, this articulated leg harness is ideal for late medieval and Renaissance scenarios and will make your transformation into a proud and noble knight or warrior simply perfect!Leg protectors are sold as a pair.Details:- Material: 1.6 mm (16 ga) steel plate, brown leather straps, aged brass buckles- Total length: approx. 47 cm - Thigh opening width: approx. 18 cm- Width of the opening at the shin: approx. 14.5 cm- Spherical plain plain dimensions: approx. 15 x 12 cm (depth approx. 9 cm)- Diameter of the side rondels: approx. 13.5 cm- Weight (pair): approx. 3.9 kgSpecifications may vary slightly from part to part.Observation:To ensure this armor is right for you, remember to take your measurements over your gambeson and/or any piece of clothing or chainmail you plan to wear underneath!The steel used here is not rust-proof and may have slight surface stains in places. We recommend that you maintain plate armor regularly, for example by using the universal Ballistol oil, which is ideal for steel care.
€226.32
€282.90
Warrior Neck Plate, Steel
  • -20%
Warrior Neck Plate, Steel
Warrior Neck Plate, SteelThe Warrior Neck Plate consists of a pectoral and a smaller back plate and features riveted leather straps with buckles for an individual fit. In addition, this piece of armor provides additional fixings for shoulder armor. Made of 1mm thick steel with rivets and no sharp edges, therefore safe for LARP guns. Since this neck plate is neutral in style, it will be a great addition to any LARP character armor.Details:- Material: 1mm steel, vegetable-tanned leather (handles)- Available sizes: S, M/L/XLMeasures:



Size
Weight
Width
Neckline diameter


S
approx. 450 g
approx. 30 cm
approx. 14 cm


M/L/XL
approx. 650 g
approx. 34 cm
approx. 17 cm



Keep armor pieces dry and apply a thin layer of oil during storage to prevent rusting. Scrub with fine steel wool to remove stains and wipe with oil if rust appears. To increase the longevity of the leather parts of your armor, maintain them regularly with leather care products.
€63.96
€79.95
copy of Medieval Norman steel nose helmet with leather lining
  • -20%
copy of Medieval Norman steel nose helmet with leather lining
Eager to portray a Norman knight fighting for none other than the fierce William 'the Conqueror'? Then you'll certainly need to stay protected while attacking Harold's Saxons! This sturdy Nasal helmet will do it effortlessly for you!
For centuries, the nasal helmet was the most popular helmet in most of Europe due to its versatility and good balance between protection and mobility. For example, it proved ubiquitous in the Bayeux Tapestry, depicting the invasion of Saxon England by the Norman knights and footmen of William the Conqueror. Speaking of who, a specific incident at the Battle of Hastings, illustrated in the Bayeux Tapestry, reveals how William the Conqueror had to lift his nasal helmet to show his troops that he was still alive after the rumor of his death spread in his army.
This beautiful nasal helmet is handmade from 16-gauge mild steel, lined with a comfortable and secure leather lining. A circumference of approximately 68 cm makes it fit almost all head sizes. And a sturdy chin strap closed with a beautiful buckle will help keep your helmet in place during all your battles.
€110.21
€137.76