Manica- Gladiator Leather Arm Protector (segmentata)
  • -20%
Manica- Gladiator Leather Arm Protector (segmentata)
Manicae were part of the Roman gladiator's standard equipment. This arm protector is depicted in numerous images from the period. Take, for example, our second photo showing a mosaic in Zliten (Libya) from the 2nd century AD.
The guard covers the entire arm, from shoulder to hand. The Latin name "manica" means "long arm".
Our reproduction is robustly manufactured and suitable as gladiator equipment.
Measures:- Arm length: approx. 87 cm- Shoulder width: approx. 35 cm- Width at the wrist: approx. 12 cm- Weight: approx. 750 grams
€118.08
€147.60
Gothic leg guards, pair, 1.2mm steel
  • -20%
Gothic leg guards, pair, 1.2mm steel
Gothic Leg Guards, 1.2mm Steel, PairCuisses and PoleynsThis fully articulated, wearable reconstruction of a late medieval plate armor for the legs is made of 1.2 mm (18 gauge) steel and blackened on the inside for better corrosion resistance. It is designed to protect the legs from the thighs to the upper shins and shows the typical multi-layered appearance of the Gothic plate armor of the late Middle Ages (15th/16th century).The leg protection consists of a poleyn (kneecap, also known as genouillere), a cuisse, and a short greva. For adequate freedom of movement, all parts are connected to each other by sliding plates or lames that are hinged on sturdy steel rivets.On the back, each leg is equipped with three riveted, adjustable leather straps approx. 2 mm thick with brass buckles for a comfortable and personalized fit.The edges are adorned with grooves and small steel rivets, and the poleyns feature slightly concave, flower-shaped steel rondels that are riveted to the sides (see also our besagews – product no. 1016634200).This articulated leg harness is ideal for late medieval and Renaissance environments. Equally suitable for the portrayal of a wide range of historical figures and fictional/fantasy characters, it will make your transformation into a proud and noble knight or warrior perfect, whether used for medieval reenactment, LARP, stage, TV/film, fantasy or cosplay.Leg protectors are sold as a pair.Details:- Material: 1.2 mm (18 ga) steel plate, brown leather straps, buckles aged brass - Total length: approx. 48 cm- Thigh opening width: approx. 16 cm- Width of the opening at the shin: approx. 14 cm- Spherical plain plain dimensions: approx. 14 x 13 cm (depth approx. 8 cm)- Diameter of the side rondels: approx. 14 cm- Weight (pair): approx. 2.8 kgSpecifications may vary slightly from part to part.
€191.88
€239.85
15th century knee pads (pair)
  • -20%
15th century knee pads (pair)
15º c. Knee pads (pair), steelThese medieval wearable knee pads are handmade from approximately 1.3 mm of steel. Riveted leather straps allow for individual adjustment.Details- Length: approx. 40 cm- Maximum width: approx. 30 cm including protrusion- Material thickness: approx. 1.3 mm- Weight: approx. 3.2 kg- Sold as a pair of two
€118.08
€147.60
Poleyns, 15º C., Steel 1.6 mm, Pair
  • -20%
Poleyns, 15º C., Steel 1.6 mm, Pair
Late Medieval Poleyns, Knee Protection, 15th Century, 1.6 mm Steel, PairThis fully articulated, wearable reconstruction of a plate armor for the knees, used in the late Middle Ages, is designed to protect the knee area from the lower thigh to the upper shin. It is made of 1.6 mm (16 gauge) steel and blackened on the inside for better corrosion resistance.Leg armor consists of poleyns (kneecaps, also known as genouilleres), short gousses with braided ropes (including brass spikes), and short greaves. All parts are connected to each other by sliding plates or lames that are hinged into sturdy steel rivets, thus allowing adequate freedom of movement. The upper edge of the breastplates and the lower edge of the greaves are coiled, and the poleyns extend into distinctive fishtail-shaped wings on the outer sides.On the back, three adjustable riveted leather straps approx. 3 mm thick and steel buckles allow for a comfortable and customised fit.Equally suitable for medieval reenactment, LARP, stage, TV/film, or costume, these articulated knee guards are best suited for late medieval settings and ideal for completing the armour of a European warrior or knight.The poleyns are sold as a pair.Details:- Material: 1.6 mm (16 ga) steel plate, black leather straps, steel buckles, cotton cords with spikesBrass - Total length: approx. 45 cm - Thigh opening width: approx. 16 cm- Width of the opening at the shin: approx. 16 cm- Spherical plain bearing dimensions: approx. 15 x 12 cm (depth approx. 10 cm)- Side wing dimensions: approx. 17.5 x 12 cm- Weight (pair): approx. 3.9 kg
€98.40
€123.00
Spangenhelm, 1.6 mm steel
  • -20%
Spangenhelm, 1.6 mm steel
This is a fully battle-ready replica of a historic spangenhelm.It is made of 1.6 to 3.2 mm steel. The two halves of the helmet are welded together. The metal straps that form the rudder frame (Spangen), as well as the 3 mm steel nose, are riveted to the helmet.The fine workmanship and overlapping construction ensure high robustness and thus the best possible protection during battle reenactment.Delivery includes a very comfortable and high-quality adjustable quilted lining and a riveted leather chin strap and brass buckle.This type of rudder is available in sizes M and L.Details:- Material: 1.6mm to 3.2mm steel near the Spangen (metal plate tips)- Nasal force: 3 mm- Riveted quilted fabric lining and strapLeather Chin Size Chart:



Size
Maximum Head Circumference
Internal distance back to forehead approx.
Internal distance from ear to ear approx.
Approx. weight


M
61 cm
22 cm
18.5 cm
3 kg


L
63 cm
23.5 cm
20 cm
3.25 kg


€147.60
€184.50
Helmet of Themistocles, Greek Helm, 1.2 mm Steel
  • -20%
Helmet of Themistocles, Greek Helm, 1.2 mm Steel
Greek helmet of Themistocles made of 1.2 mm steel with trimAntique Bronze Details:- Material: 1.2mm steel (18 gauge) finishantique bronze - Maximum head circumference: approx. 66 cm- Long distance (from back to front): approx. 23 cm- Short distance (ear to ear): approx. 19 cm- Height: approx. 35 cm- Weight: approx. 2.1 kgThis exquisitely crafted Greek helmet is the perfect choice for anyone looking for a high-quality and affordable piece of armor. This carefully handmade helmet offers excellent value for money and is ideal for completing the armour of a Greek hoplite.Themistocles (524 BC – 459 BC) was an important Athenian politician and general during the Persian Wars. He is especially known for his decisive victory over the Persian fleet at the Battle of Salamis in 480 BC. Under his leadership, the Athenian navy, with only 300 ships, managed to largely destroy a vastly superior Persian force of about 1,200 warships. The helmet is made of 1.2mm steel with an antique bronze finish and is inspired by the classic Corinthian helmet that emerged in the early 7th century BC. It has a solid steel crest and the cheek and nose protector characteristic of this type of helmet. The edges are wrapped around and the inside is blackened for better corrosion resistance. The riveted, high-quality, adjustable leather lining ensures a secure and comfortable fit, while the pre-perforated leather chin strap allows for a custom fit.Suitable for re-enactment, LARP, stage or film/TV, this fully wearable Greek helmet is best suited for old settings and will make your transformation into a Greek soldier seamless. Of course, it's also an excellent addition to any helmet collector's treasure chamber.
€123.00
€153.75
Lorica Segmentata Type Corbridge A, Stainless Steel
  • -20%
Lorica Segmentata Type Corbridge A, Stainless Steel
Lorica Segmentata Type Corbridge A, Waterproofrust Authentic replica of an original dated around 1 BC and found in Corbridge (England).This version is identical to Art.Nr. 1016385100, except that it is rust-proof and prevents tiresome cleaning and lubrication.Details:- Material: 1.2mm stainless steel, brass, leatherSize chart:



Size
Maximum Thoracic Circumference
Approx. weight


M
115 cm
12.5 kg


L
130 cm
12.5 kg


€388.68
€485.85
Midrib arm guards, steel
  • -20%
Midrib arm guards, steel
Midrib arm guards, steelHandmade lower arm plate armor. The middle rib and folded edges allow for a lightweight thickness of only 1.2mm of steel.Two sturdy adjustable leather straps with buckles are riveted to the inside of the armor. The color of the leather may vary.Sold as a pair.Details:- Length: approx. 21 cm- Width: approx. 17 cm- Material thickness: approx. 1.2 mm steel- Leather thickness: approx. 2.5 mm- Finish: Polished (Lightly Oiled)- Weight: approx. 700 g
€41.33
€51.66
Medieval Plate Sabatons, 14º c., 1.5 mm Steel, Pair
  • -20%
Medieval Plate Sabatons, 14º c., 1.5 mm Steel, Pair
In the late Middle Ages and into the Renaissance, sabatons (also known as sollerets or solerets) were pieces of plate armor that covered the top and sides of the foot. They were commonly used by mounted knights to protect their feet against blows from enemy soldiers.The wearable articulated sabatons we offer here are based on examples from the 14th century. They are hand-forged from 1.5mm thick steel, blackened on the inside for better corrosion resistance, and fitted with riveted leather straps on the bottom. They have no sole and consist of a tapered but slightly rounded toe box, several hinged or lame bands, an ankle plate, a "tongue" plate, and a heel cap, all connected by sturdy rivets.Equally suitable for historical reenactment or LARP, this articulated foot armor is ideal for late medieval settings and will make your portrait of a proud knight perfect!Sold as a pair.A version of the same sabatons with a pointed toe is also available in our store (product no. 1064000058).Details:- Material: 1.5mm steel, strips- Total length: approx. 34 cm (suitable for a shoe size of approx. 44 to 47 - EU)- Height at the back: approx. 10 cm - Width at widest point: approx. 12 cm- Opening dimensions: approx. 12 x 10 cm- Weight (pair): approx. 2.1 kgSpecifications may vary slightly from part to part.To make sure these sabatons are right for you, remember to take your measurements with the shoes you plan to wear underneath!The steel used here is not rust-proof and may have slight surface stains in places. We recommend that you maintain plate armor regularly, for example by using the universal Ballistol oil, which is ideal for steel care.
€139.73
€174.66
Lorica Segmentata - Arm Attachment
  • -20%
Lorica Segmentata - Arm Attachment
Lorica Segmentata - FixationMade of 1.6 mm steel. Includes leather straps for fastening. Suitable for use on both sides.Delivery includes one piece (not a pair!).Measures- Length: approx. 61 cm- Width: approx. 21 cm including protrusion- Thickness: 1.6 mm (16 ga)- Weight: approx. 1.7 kg
€73.80
€92.25
Medieval Bevor, 1.2 mm steel
  • -20%
Medieval Bevor, 1.2 mm steel
Medieval Bevor, 1.2 mm steelDetails:- Material: 1.2mm steel (18 gauge), leather strap, aged brass buckle- Minimum/maximum height: approx. 28 cm with downward hinged lame / 32 cm with upwards hinged lame- Width of the collar at shoulder height: approx. 28 cm- Neck opening at the back: approx. 19 cm- Maximum width of the face section: approx. 22 cm- Weight: approx. 1.1 kgThis elegant medieval bevor impresses not only with its authentic design, but also with its excellent value for money. It is an ideal choice for those who want to complete their knight's armor with a detailed, high-quality, and affordable piece of armor.The bevor was an essential part of medieval armor. Usually made of a single piece of plate armor, it protected the chin and throat and filled the gap between the helmet and the breastplate. Originally Bevor was used in combination with a sallet. As the sallet evolved into the closed helmet and burgonet, the bevor also developed into a hinged plate that protected the lower face and throat.This fully wearable reconstruction of a late medieval bevor is made of 1.2mm steel and blackened on the inside for better corrosion resistance. The bevor, also known as the beaver, features the multi-part construction typical of 15th- and 16th-century Gothic plate armor. While the gorget and chin piece are fixedly riveted to each other, the top plate is fixed with hinges and can be raised or lowered. When upwards, it reaches below the eyes. A small retractable pin, on the right side of the chin section, holds the folding thigh firmly in place. It is reinforced at the top edge and features a row of round cutouts that ensure proper ventilation. The rolled edge is adorned with grooves. A braided bead at the bottom edge allows the bevor to be securely attached to a gambeson or plate armor. The bevor is open at the back (no neck plate) and equipped with a sturdy, riveted leather strap and brass buckle. The strap is adjustable in size to ensure a comfortable and personalized fit.The collar is ideal for late medieval and Renaissance settings. Equally suitable for the portrayal of a wide range of historical figures and fictional/fantasy characters, it will make your transformation into a proud and noble knight or warrior perfect, whether used for medieval reenactment, LARP, stage, TV/film, fantasy or cosplay.Order now and get a piece of history!
€73.80
€92.25
Medieval Shoulder Pads, Shoulder Protectors, Pair, Steel 1.2 mm
  • -20%
Medieval Shoulder Pads, Shoulder Protectors, Pair, Steel 1.2 mm
Medieval Pauldrons made of 1.2 mm steel, pair - protectors ofShoulder Details:- Material: 1.2mm steel (18 gauge), leather straps, bucklesaged brass - Total length: approx. 37 cm- Shoulder width: approx. 20 cm- Width at upper arm: approx. 17 cm- Weight (pair): approx. 4 kgThese elegant medieval jambs impress not only with their authentic design, but also with their excellent value for money. They are an ideal choice for anyone looking to complete their knight armor with a detailed, high-quality, and affordable piece of armor.This wearable reconstruction of a late medieval plate armor for the shoulders is made of 1.2mm steel and blackened on the inside for better corrosion resistance. The jambs (sometimes spelled pouldrons or powldrons) show the typical multi-layered appearance of Gothic plate armor from the late Middle Ages (15th/16th century). The backrests consist of 11 segments - a large main plate for the shoulder, three upper sliding plates or lames and seven lower lames, all connected by sturdy rivets. Each shoulder pad is equipped with an adjustable and sturdy leather strap with a brass buckle, for a comfortable and personalized fit at arm height. The braided cords on the upper and lower edge of the espalier allow for proper attachment to other pieces of plate reinforcement, such as a gorget, a bevor, a breastplate or a gambeson.This shoulder armor is ideal for late medieval and Renaissance environments. Equally suitable for the portrayal of a wide range of historical figures and fictional/fantasy characters, it will make your transformation into a proud and noble knight or warrior perfect, whether used for medieval reenactment, LARP, stage, TV/film, fantasy or cosplay.Shoulder pads are sold as a pair.Order now and get a piece of medieval history!Observation:To ensure this armor is right for you, remember to take your measurements over your gambeson and/or any piece of clothing or chainmail you plan to wear underneath!Specifications may vary slightly from part to part.
€73.80
€92.25
15° C. Leg guard, 1.6 mm steel
  • -20%
15° C. Leg guard, 1.6 mm steel
15º C. Leg harness, steel1.6 mm Wearable, fully articulated reconstruction of a leg armor from the late Middle Ages.The leg harness set consists of a pair with connected grelts, poleyns with fan plates and breastplates, which offer protection for the upper and lower leg as well as the knee. The leg protection comes complete with three leather straps and buckles, too, to secure the plates on the lower limbs for ease of use.It is hand-beaten in 1.6mm mild steel and suitable for combat, re-enactment, LARP and costumes.They are offered as a matched pair.Details:- Material: approx. 1.6 mm mild steel, leather- Total length: approx. 55 cm- Finish: Polished (Lightly Oiled)- Weight: approx. 3.9 kg
€226.32
€282.90
Gothic cuirass, 1.2 mm steel
  • -20%
Gothic cuirass, 1.2 mm steel
Gothic Cuirass, Torso Plate Armor, SteelThis elaborately crafted and beautifully detailed reconstruction of a late medieval cuirass is made of 1.2mm steel (18 gauge) and consists of a breastplate and a back plate.While the pectoralis is equipped with three sliding thighs (the so-called faulds) to protect the hips, waist, groin and lower abdomen, the beautiful backplate is completed by a widely enlarged culet composed of two wavy and overlapping sliding bands that protect the buttocks. The faulds as well as the culet are hinged on steel rivets. Both the front and back feature the typical ridges, filigree cutouts, and multi-layered appearance of the Gothic plate armor of the late Middle Ages (15th/16th century). For better corrosion resistance, the inside of the reinforcement is blackened.The two halves of torso armor are fitted around the body and secured in place with 3mm thick adjustable leather straps and steel buckles. This allows for a comfortable fit for a variety of sizes. The straps and buckles are firmly riveted to the chest and back plates at shoulder height and on the sides.Note that this item, while fully usable, is not a battle-ready cuirass. However, it's not only a great collectible or décor/display piece, but also perfectly suited for the depiction of a wide range of historical and fictional/fantasy characters. Ideal for late medieval reenactment, LARP, stage or cosplay, it will make your transformation into a proud and noble knight or warrior perfect.Details:- Material: 1.2 mm (18 ga) steel plate, leather straps, steel buckles- Total length with faulds/culet: front approx. 61 cm, back approx. 73 cm (measured from the highest point of the shoulder to the bottom hem)- Chest circumference: from approx. 120 cm (for a tight fit) to a maximum of 140 cm(adjustable with straps and buckles)- Neck opening (diameter): approx. 18 cm- Weight: approx. 8.5 kgSpecifications may vary slightly from part to part.Observation:To ensure that this torso armor is right for you, remember to take your measurements over your gambeson and/or any piece of clothing or chainmail you plan to wear underneath!
€206.64
€258.30
Bevor, 1.6 mm steel, with leather strap
  • -20%
Bevor, 1.6 mm steel, with leather strap
Bevor, 1.6 mm steel, with braceletleatherThis bevor neck guard has been made of 1.6 mm steel and has been reinforced in the mouth area by adding an additional plate. The steel has been creased in the mouth and chest area to minimize the possibility of injury. The leather strap allows individual size adjustment.Details:- Material: approx. 1.6 mm steel- Max. height: approx. 18 cm- Max. width Max. face section: approx. 19 cm- Weight: approx. 0.9 kg- Finish: Polished (Lightly Oiled)
€93.48
€116.85
Late medieval Bevor with tip, 1.6mm steel
  • -20%
Late medieval Bevor with tip, 1.6mm steel
Late medieval bevor with tip, steel1.6 mm This wearable reconstruction of a late medieval plate armor for the throat, chin and neck is made of 1.6 mm steel (16 gauge) and blackened on this interior for better corrosion resistance.The bevor (or beaver) shows the typical multi-layered appearance of Gothic plate armor from the late Middle Ages (15th/16th century). While the throat and chin parts are fixedly riveted to each other, the upper or lame sliding plate is hinged into rivets and can be raised or lowered. When upwards, it reaches below the eyes and provides additional face protection. It is reinforced at the top edge and a row of round cutouts ensures proper ventilation. On the right side of the chin section, a small embossment holds the foldable coxe firmly in position when folded.On the back, the bevor has a two-part hinged neck protector that opens laterally and closes by attaching it to the throat piece by means of a small pin. The front and back plates form a complete gorget.This collar is ideal for late medieval and Renaissance environments. Equally suitable for medieval reenactment, LARP, stage, TV/film, costume, it will make your transformation into a proud and noble knight or warrior perfect.Details:- Material: 1.6 mm (16 ga) sheet steel, rivetsof steel - Minimum / maximum height: approx. 22 cm with hinged lame downwards / 27 cm with hinged lame upwards- Width of the collar at shoulder level: approx. 28 cm- Neck opening at the back: approx. 15.5 cm - Maximum neck circumference: approx. 48 cm- Maximum width of the face section: approx. 16 cm- Weight: approx. 2.1 kgSpecifications may vary slightly from part to part.Please note:To ensure that this armor is the right fit for you, remember to take your measurements on your gambeson and/or any garments or chainmail you may plan to wear underneath!The steel used here is not rust-proof and may have slight surface stains in places. We recommend that you maintain plate armor regularly, for example by using the universal Ballistol oil, which is ideal for steel care.
€98.40
€123.00
Gothic torso and backplate, 1.2mm steel
  • -20%
Gothic torso and backplate, 1.2mm steel
Gothic Cuirass, Torso and Back Plate, Steelof 1.2 mm This reconstruction of a late medieval torso plate armor is made of 1.2 mm steel (18 gauge). It consists of a breastplate and a back plate, and shows the typical multi-layered appearance of Gothic plate armor from the late Middle Ages (15th/16th century).The edges on the neckline, armholes, and lower edge are adorned with decorative grooves, and the breastplate features several ornamental steel rivets. The interior of the armature is darkened for better corrosion resistance.The two halves of torso armor are fitted around the body and secured in place with 3mm thick adjustable leather straps and brass buckles. This allows for a comfortable fit for a variety of sizes. The straps and buckles are firmly riveted to the chest and back plates at shoulder height and on the sides.This fully wearable Gothic cuirass is ideal for late medieval and Renaissance environments. Equally suitable for the portrayal of a wide range of historical figures and fictional/fantasy characters, it will make your transformation into a proud and noble knight or warrior perfect, whether used for medieval reenactment, LARP, stage, TV/film, fantasy or cosplay. Plus, it's also a great collectible or decoration/display piece!Details:- Material: 1.2 mm (18 ga) steel plate, brown leather straps, bucklesaged brass - Total length: front approx. 49 cm, back approx. 51 cm (measured from the highest point of the shoulder to the bottom hem)- Chest circumference: from approx. 120 cm (for a tight fit) to a maximum of 140 cm (adjustable with straps and buckles)- Neck opening (diameter): approx. 18 cm - Weight: approx. 5.3 kgSpecifications may vary slightly from part to part.Delivery includes only chest and back plate! The other armor pieces pictured above are available separately in our online shop.Please note:To ensure that this torso armor is the right fit for you, remember to take your measurements over your gambeson and/or any piece of clothing or chainmail that you may plan to wear underneath!The steel used here is not rust-proof and may have slight surface stains in places. We recommend that you maintain plate armor regularly, for example by using the universal Ballistol oil, which is ideal for steel care.
€147.60
€184.50
Bevor Gothic, 1.2mm steel
  • -20%
Bevor Gothic, 1.2mm steel
Bevor Gothic, Steel1.2 mm This wearable reconstruction of a late medieval plate armor for the throat and chin is made of 1.2 mm steel (18 gauge) and blackened on this interior for better corrosion resistance.The bevor (or beaver) shows the typical multi-layered appearance of Gothic plate armor from the late Middle Ages (15th/16th century). It consists of three parts – a gorget and a chin piece that are fixedly riveted to each other and a top sliding plate or lame for additional face protection. The top plate is hinged into rivets and can be raised or lowered. When upwards, it reaches below the eyes. It is reinforced at the top edge and has a row of round cutouts that ensure proper ventilation. On the right side of the chin section, a small retractable pin holds the folding thigh firmly in position when folded.The bevor is open at the back (without neck plate) and equipped with a riveted leather strap approx. 2 mm thick and a brass buckle. The strap is adjustable in size to ensure a comfortable and personalized fit.This collar is ideal for late medieval and Renaissance environments. Equally suitable for the portrayal of a wide range of historical figures and fictional/fantasy characters, it will make your transformation into a proud and noble knight or warrior perfect, whether used for medieval reenactment, LARP, stage, TV/film, fantasy or cosplay.Details:- Material: 1.2 mm (18 ga) steel plate, brown leather straps, aged brass buckle- Minimum / maximum height: approx. 16 cm with downward hinged lame / 21 cm with upwards hinged lame- Shoulder collar width: approx. 22.5 cm - Neck opening at the back: approx. 12.5 cm- Maximum width of the face section: approx. 17 cm- Weight: approx. 820 gSpecifications may vary slightly from part to part.Please note:To ensure that this armor is the right fit for you, remember to take your measurements on your gambeson and/or any garments or chainmail you may plan to wear underneath!The steel used here is not rust-proof and may have slight surface stains in places. We recommend that you maintain plate armor regularly, for example by using the universal Ballistol oil, which is ideal for steel care.
€63.96
€79.95
Steel arm guards
  • -20%
Steel arm guards
These lower arm guards are made of steel. The central spine and folded edges allow for a low steel thickness of only 1.2 mm. There are two sturdy leather straps with buckles riveted into the steel and allow for individual size adjustment. The color of the leather may vary.Sold as a pair.Details:- Material: 1.2mm steel, leather2.5 mm - Finish: polished (lightly oiled)- Weight: approx. 950 g (pair)- Length: approx. 25 cm
€54.12
€67.65
Steel Gorget, 15th century
  • -20%
Steel Gorget, 15th century
Steel Gorget, fifteenth century with pieceschest and back Details- Material: 1.6mm steel, stripsLeather-Finish: Natural (Oiled)- Weight: approx. 1.2 kg
€54.12
€67.65
Gothic Doorbells, Shoulder Protectors, Pair, 1.2mm Steel
  • -20%
Gothic Doorbells, Shoulder Protectors, Pair, 1.2mm Steel
Gothic Flirts, Shoulder Protectors, 1.2mm Steel, PairThis wearable reconstruction of a late medieval plate armor for the shoulders is made of 1.2 mm (18 gauge) steel. The jambs (sometimes spelled pouldrons or powldrons) show the typical multi-layered appearance of Gothic plate armor from the late Middle Ages (15th/16th century). They consist of five parts – a dome-shaped or policeman-shaped shoulder piece, an upper or thigh sliding plate, and three lower thighs, all connected by sturdy rivets on the inside.Each shoulder pad is equipped with an approximately 2 mm thick adjustable leather strap with brass buckle for a comfortable and personalized arm-length fit. The buckle positioned on the top edge allows for proper attachment to other pieces of plate armor (a gorget, a bevor, a breastplate - for example, our item no. 1016633700) or a gambeson.The edges of the backrests are adorned with grooves and small steel rivets, and the inside of the armor is blackened for better corrosion resistance.This shoulder armor is ideal for late medieval and Renaissance environments. Equally suitable for the portrayal of a wide range of historical figures and fictional/fantasy characters, it will make your transformation into a proud and noble knight or warrior perfect, whether used for medieval reenactment, LARP, stage, TV/film, fantasy or cosplay.Shoulder pads are sold as a pair.Details:- Material: 1.2mm (18 ga) steel plate, brown leather straps, bucklesaged brass - Total length: approx. 34 cm- Shoulder width: approx. 23 cm- Arm width: approx. 14 cm- Weight (pair): approx. 1.9 kgSpecifications may vary slightly from part to part.Delivery includes only the shoulder pads! The other armor pieces pictured above are available separately in our online shop.Observation:To ensure this armor is right for you, remember to take your measurements over your gambeson and/or any piece of clothing or chainmail you plan to wear underneath!The steel used here is not rust-proof and may have slight surface stains in places. We recommend that you maintain plate armor regularly, for example by using the universal Ballistol oil, which is ideal for steel care.
€93.48
€116.85
Knee pads (pair), polished steel
  • -20%
Knee pads (pair), polished steel
Pair of knee pads, steelPolished Pair of steel knee protection. These were used by foot soldiers as well as cavalrymen.Details:- Made of 1.6 mm steel (16 gauge)- including strapsLeather Fastening - Sold as a pair of two- Length: approx. 18 cm- Max. width: approx. 26 cm including bulge- Thickness: 1.3 mm- Weight: approx. 1.2 kg
€73.80
€92.25
Gothic Arm Guard, 16º C., 1.6 mm Steel, Pair
  • -20%
Gothic Arm Guard, 16º C., 1.6 mm Steel, Pair
Complete Protection of Gothic Arm, Vambraces, Couters, Rebraces and Pauldrons of the CenturyXVI SteelThis fully articulated, wearable reconstruction of a late medieval or rather Renaissance arm armour, used in the sixteenth century, is made of 1.6mm thick steel and blackened on the inside for better corrosion resistance. It is designed to protect the forearms, elbows, arms and shoulders.Arm protection consists of a couter or cowter (also known as an elbow cop), a two-piece tubular (hinged) vamp or lower barrel for the forearm, a short tubular rerebrace or upper barrel for the arm, and a shoulder pad (sometimes spelled pouldron or powldron) to the shoulder. For proper freedom of movement, all parts are connected to each other by sliding plates or lames held in place by sturdy leather strips riveted inside. A strap buckle is riveted to the top edge of the shoulder plate, allowing the arm harness to be attached to a gambeson with braided ropes or connected to other pieces of the plate armor via leather straps.Equally suitable for historical reenactment, LARP, stage, TV/film, or fantasy, these articulated arm guards will make your portrait of a proud knight perfect!Sold as a pair. Details:- Material: 1.6mm steel, leather straps, brass buckles- Total length: approx. 65 cm- Inner diameter at arm: approx. 13 cm- Inner diameter at wrist: approx. 8 cm- Shoulder width: approx. 23 cm- Weight (pair): approx. 6.5 kgSpecifications may vary slightly from part to part.Please note:To ensure that this armor is the right fit for you, remember to take your measurements on your gambeson and/or any garments or chainmail you may plan to wear underneath!The steel used here is not rust-proof and may have slight surface stains in places. We recommend that you maintain plate armor regularly, for example by using the universal Ballistol oil, which is ideal for steel care.
€275.52
€344.40
Gladiator Steel Neck Protector
  • -20%
Gladiator Steel Neck Protector
Gladiator neck protector, SteelTwo-piece neck guard made of 1.2 mm steel. Both parts are connected with wire pins.Details:- Material: approx. 1.2 mm steel- Finish: Polished (Lightly Oiled)- Weight: approx. 1.1 kg
€63.96
€79.95
Cowters, pair, 2 mm steel
  • -20%
Cowters, pair, 2 mm steel
Cowters, CoupleVery robust and authentic arm pieces for elbow protection made by ULFBERTH.® Smaller people can also use them as knees.Handmade from 2 mm sheet steel. The five segments are riveted by hand. Two leather straps with brass buckle are attached to each piece.This is a pair.Details:- Material: 2mm steel plate, leather strapsbovine- Diameter: approx. 11.5 cm- Total length: approx. 28 cm
€88.56
€110.70
Floating Elbow, Polished Steel, Pair
  • -20%
Floating Elbow, Polished Steel, Pair
Floating Elbow, Polished Steel, Pair Protecteffectively the vulnerable and exposed parts of your body with this pair of floating elbows against attacks of any kind. Robust yet comfortable and flexible, with great mobility, they can be attached to the elbows with straps for an individual fit. Made of 1mm thick polished steel with rivets and no sharp edges to make them safe for LARP guns. And since the style is more neutral, they'll be a great addition to any LARP character armor.Details:- Delivery includes: 1 pair (= 2 pieces) floating elbows- Material: 1mm steel, vegetable-tanned leather (handles)- Size: SizeSingle - Total weight: approx. 1571 g- Length: approx. 29 cm- Width: approx. 13 cm- Arm circumference: approx. 21 cm min. / approx. 37 cm max.Keep armor pieces dry and apply a thin layer of oil during storage to prevent rusting. Scrub with fine steel wool to remove stains and wipe with oil if rust appears. To increase the longevity of the leather parts of your armor, maintain them regularly with leather care products.
€123.00
€153.75