Robin Hood Sword without sheath - 7
  • -20%
Robin Hood Sword without sheath
Robin Hood Sword

Blade made of 440 hardened and tempered stainless steel for 47-51 HRC
Total length approx. 1024 mm
Length of blade approx. 826 mm
Length of protection approx. 209 mm
Blade width approx. 39.01 mm
Blade thickness approx. 3.84 mm
Weight approx. 1036 g
€63.23
€79.04
Details View details  
Sword King Richard- Lionheart No sheath - 1
  • -20%
Sword King Richard- Lionheart No sheath
King Richard's Lionheart Sword, Marto
The traditional image of Richard the Lionheart, the second Plantagenet king of England, has come to us over the centuries as a glorious crusader and knight. Captured by the Austrian emperor, he was later rescued by the young troubadour Blondel, who discovered Richard while singing a famous ballad.
€221.31
€276.64
Details View details  
Merlín's Dagger The Mage without sheath - 3
  • -20%
Merlín's Dagger The Mage without sheath
Merlin Dagger, MartoIts name means FALCON, when he was born of the beautiful Lady of the Lake, the great druid Hafgan, from whom Merlin was supposed to learn all his magic, announced the birth of the Great Lord of Light. His grandfather taught him to be a great warrior and tireless defender of the Empire.
€110.40
€138.01
Details View details  
Sword and sheath Honshu Khopesh, Chepesch - 1
  • -20%
Sword and sheath Honshu Khopesh, Chepesch
The Honshu Khopesh is a re-reading of the egyptian sity-shaped sword that was found in the pharaohs' burial chambers.The Egyptian sword has a sharp blade, approx. 5Cr13 7Cr13 stainless steel curved blade with satin finish. The curved cable is made of impact-resistant injection molded nylon and features a strongly textured EDM handle (electric discharge machining).Approx. The 115 cm long khopesh sword comes with a premium leather blade cover with a double-fitting clasp.
€316.16
€395.20
Details View details  
Robin Hood Sword - 3
  • -20%
Robin Hood Sword
Robin Hood's sword Gold and Silver. The legend of Robin Hood places during the reign of Richard the Lionheart. This outlaw folk hero lived in Sherwood Forest with his band of followers. Famous for being the benefactor of the poor and oppressed against the powerful. Bold, talkative and cheerful, he has always been loyal to his lord, King Richard, especially to the usurper John of the land and the Sheriff of Yorkshire.
€295.08
€368.85
Details View details  
Sword of Joan of Arc, Fate/Grand Order - 2
  • -20%
Sword of Joan of Arc, Fate/Grand Order
This sword is based on the weapon used by the character Joan of Arc in the game Fate/Grand Order and the anime Fate/Apocrypha.The blade is made of polished 420 steel. The elaborate handle and sheath elements are made of molten zinc.Details:- Blade material: 420 steel, polished- Cable material: Molten zinc- Total length: approx. 96 cm- Blade length: approx. 68 cm- Weight: approx. 1360 g- Sheath included
€292.97
€366.22
Details View details  
Medieval sword type XVI Typology Oakeshott with leather scabbard - 3
  • -20%
Medieval sword type XVI Oakeshott typology with leather scabbard
A perfect addition to your knight's décor or attire, this historically accurate Type XVI sword is a true work of art. Without a doubt, this sword will perfectly complement your medieval setting!
This sword is HAND FORGED from tough CARBON STEEL, which makes it durable and long-lasting. The total length of this sword (including the hilt and hilt) is approximately 35.82 inches. So that you can comfortably carry it on all your adventures, this sword comes with a genuine leather scabbard and belt. LORD OF THE BATTLES
€199.18
€248.98
Details View details  
Classic Hoplite Sword, Windlass - 2
  • -20%
Classic Hoplite Sword, Windlass
The Greek Hoplite was a tough and effective citizen-soldier and was fierce in the defense of his hometown. A leaf-shaped blade like the one on this sword, around the fifth century B.C., was quite popular throughout the ancient world and is based on many excavated illustrations and examples. Features include steel guard and pommel with leather-covered wooden handle. The blade is made of high-carbon steel. This is one of the best weapons of the ancient world.Includes matching wooden sheath with leather cover and brass applications.Manufactured by Windlass Steelcrafts.Note that this Gladius is not a battle-ready weapon. It is designed as a collector's piece or decoration/display and is not suitable for combat reenactment. In addition to collector's quality, it is also perfectly suited as an accessory, for example to complete your costume.Details:- Material: 1065 high carbon steel- Total length: approx. 62.5 cm- Blade length: approx. 55.5 cm- Blade thickness: approx. 4 mm - Cable length: approx. 10.7 cm / whole handle approx. 17 cm-Max. Blade width: approx. 5.5 cm- Break-even point: approx. 7.3 cm (at the front of the guard)-Incl. Leather-covered wooden sheath with brass inserts- Weight without sheath: approx. 947 g- Sheathed weight: approx. 1258 g
€240.88
€301.10
Details View details  
Cid Cadet Sword Uncle - 1
  • -20%
Cid cadet tizona sword
Cid Tizona sword, the guard, the falcons and the pommel with bronze details, the handle in black. With a total size of 75 cm, steel blade.
Overall size: 75 cmBlade size: 58 cmBlade thickness: 2.5 mmSupport: No Stand
€37.14
€46.42
Details View details  
Sword of the Knight of the River Witham with Scabbard, thirteenth century - 1
  • -20%
Knight's Sword of the River Witham with Scabbard, thirteenth century
This beautiful one-handed sword is based on an original from the collection of the British Museum in London. The armament sword, dating to the thirteenth century, was found in the River Witham near Lincoln, England, in 1825. A distinctive feature of this sword is the inscription "+NDXOXCHWDRGHDXORVI+" inlaid with gold thread. Despite numerous speculations and attempts to decipher it, the meaning of the supposedly Latin acronym remains unclear to this day.The sword has a broad, double-edged blade with unsharp edges. Two fullers run almost the entire length of it. Like the original, these are engraved with the inscription on one side and a sequence of symbols composed of crosses, crescents and stylized quatrefoils on the other. The crossguard and wheel pommel, which are riveted across the tang, are made of steel. The wooden handle is wrapped in brown leather straps.This frame sword comes complete with a wood and brown leather scabbard with steel body and throat and hinged suspension rings for a sword belt.Note that this medieval sword is not a battle-ready weapon. It is designed as a collector's piece or decoration/display and is not suitable for combat reenactment. In addition to collector's quality, it is also perfectly suited as an accessory, for example to complete your costume.Details:- Blade material: High carbon steel- Rockwell hardness: 48 – 52 HRC- Handle material: leather-covered wood, with steel guard and pommel - Total length: approx. 93 cm- Blade length: approx. 76 cm- Blade thickness: approx. 5.3 mm- Handle length: approx. 16.5 cm (clamping approx. 10 cm)-Max. Blade width: approx. 5.4 cm- Break-even point: approx. 15 cm of the guard-Incl. Wooden sheath with genuine leather cover and steel accessories- Weight without sheath: approx. 1.5 kg- Sheathed weight: approx. 2 kgSpecifications may vary slightly from part to part.The steel used here is not rust-proof and may have slight surface stains in places. We recommend that you maintain the blade regularly, for example by using Ballistol Universal Oil, which is ideal for caring for steel.
€177.12
€221.40
Details View details  
Viking Vestre Berg (Oslo) sword with scabbard, Petersen O type, 10º C - 1
  • -20%
Viking Vestre Berg (Oslo) scabbard, Petersen O type, 10º C
This beautiful Viking Sword is based on an original sword that was part of the great tomb of Vestre Berg in Løiten/Løten, Norway. According to archaeological records, the grave was discovered in 1887 among some rocks during cleaning work. A distinctive feature of the original, which dates back to the tenth century, is the blade, which was presumably ritually bent into an "S" shape. It is not known if this practice was intended to symbolically "kill" the sword before it was buried, or if the purpose was to deter grave robbers. The sword, classified as Type O according to Petersen's Viking sword typology, is now in the collection of the Kulturhistorisk Museum (formerly Universitetets Oldsaksamling) in Oslo, Norway.The replica features a wide, double-edged blade with wide, fuller, and unsharp cutting edges. The grip consists of a handle wrapped in red leather, a short, slightly curved guard, and a generously sized five-lobed pommel. The bronze guard and pommel are engraved with the same patterns and motifs that adorn the original find.The sword comes complete with a red wood and leather scabbard fitted with a bronze throat and cape and a sword belt with bronze accessories.Note that this medieval sword is not a battle-ready weapon. It is designed as a collector's piece or decoration/display and is not suitable for combat reenactment. In addition to collector's quality, it is also perfectly suited as an accessory, for example to complete your costume.Details: - Blade material: High carbon steel- Rockwell hardness: 48 – 52 HRC- Handle material: leather-covered wood, bronze handle and protection- Total length: approx. 94 cm- Blade length: approx. 78.5 cm- Blade thickness: approx. 4 mm- Handle length: approx. 15.5 cm (approx. 10.5 cm tightness)-Max. Blade width: approx. 5 cm- Break-even point: approx. 15 cm of the guard-Incl. Wooden scabbard with genuine leather cover, brass throat and cape, and sword belt- Weight without sheath: approx. 1.3 kg- Sheathed weight: approx. 2 kgSpecifications may vary slightly from part to part. The steel used here is not rust-proof and may have slight surface stains in places. We recommend that you maintain the blade regularly, for example by using Ballistol Universal Oil, which is ideal for caring for steel.
€226.32
€282.90
Details View details  
Sixteenth-Century Italian Cinquedea Short Sword
  • -20%
Sixteenth-Century Italian Cinquedea Short Sword









This Cinquedea , short sword or large dagger of Italian origin with a broad blade, belongs to the Royal Armouries . This design has a longer blade and dates from around 1500–1530.
Although the Cinquedea was often carried as a weapon by civilian personnel, and some were highly decorated, this design is relatively simple and functional, and could have been carried as a military weapon by an infantryman or gunner.
The impressively wide 66 cm blade hasa complex transition from three to two flutes, with a thin and conical cross-section distally, making it a very light and fast weapon for its size. 
Our Cinquedea is a faithful replica of all aspects of this sword in terms of shape and specifications, the most interesting being the unique construction of the hilt. The ingenious and iconic design of the guard is made with various components welded together, just like the original. The base of the blade extends completely through the guard and is attached to it (see photos). The blade base and rivet heads are ground flush with the guard and the entire assembly is polished. This method offers exceptional strength and durability. The blade also features a full-profile tang, with scales on the wooden hilt and decorative brass rivets inlaid with filigree.
The scabbard is made with a wooden body and covered in leather. The tip is reinforced with a brass ferrule. At the mouth of the hem, the leather extends upwards and covers part of the guard.
Manufactured by Windlass Steelcrafts, the original can be seen in the Royal Armouries Collection, Number IX.148.
Includes Certificate of Authenticity.
SPECIFICATIONS :

Total length : 80cm
Blade length : 66 cm
Width of the Ricasso blade : 8 cm
 Distal cone blade: 0.23 cm 
Weight: 1.045g
Material: High Carbon Steel, 1075
Edge: Double edge with bevel, not sharp
Balance point : 11.7 cm from the guard


Manufactured by Windlass Steelcrafts®
 
Official product licensed by Royal Armouries. The name Royal Armouries is a registered trademark of Royal Armouries.  All rights reserved. The Royal Armouries is the National Museum of Arms and Armor of the United Kingdom.
 


















 
GOODSBERMEJO
MARTO




Battle Cry
TEMPLARS
NEWS
REEL





LEGAL NOTICE
COOKIES POLICY
PRIVACY POLICY


 
SOCIAL MEDIA
  
    




€452.64
€565.80
Details View details  
Fourteenth-century hand-and-a-half sword
  • -20%
Fourteenth-century hand-and-a-half sword
An impressive longsword or imposingly large hand-and-a-half sword, probably from the late fourteenth century.
The precise origin of this European sword is unknown, but based on the markings it is likely to be of German or possibly Italian origin . It arrived at the Alexandria Armory as a diplomatic gift, war booty or as an object of homage from the Kingdom of Cyprus to the Sultanate of Egypt, where it bore an inscription in Arabic. From then on it became part of at least one private collection, before being subsequently acquired by the Royal Armouries.
The sword of this great knight features a wide and powerful Oakeshott Type XVI blade of 97 cm. It is a rather heavy sword by the standards of the time, due to the length and width of the blade, but it is wonderfully balanced thanks to the distal cone, long hilt and large hilt. Swords similar to this one can be seen widely in late fourteenth- and early fifteenth-century art, including manuscripts and also on chivalric effigies and bronzes.
Swords like this were very popular at the time throughout Europe, from England to Italy, from Portugal to Poland, and appear in several contemporary fighting treatises such as the Fior di Battaglia de Fiore delli Liberi (1410). They were worn on foot and on horseback, with or without armor, with one or two hands. This example is an especially powerful slashing weapon and less specialized in thrusts than other longswords of the time.
The scabbard is made with a wooden body and covered in leather. The tip is reinforced with a brass ferrule. At the mouth of the hem, the leather extends upwards and covers part of the guard.
Our replica matches the original in every aspect of shape, measurement, and workmanship.
Manufactured by Windlass Steelcrafts, the original can be seen in the Royal Armouries Collection, Number IX.915.
Includes Certificate of Authenticity.
SPECIFICATIONS :

Total length : 123cm
Blade length : 97 cm
Width of the Ricasso blade : 5 cm
 Distal cone blade: 0.39 cm 
Weight : 1.420g
Material: High Carbon Steel, 1075
Edge: Double edge with bevel, not sharp
Balance point : 9.3 cm from the guard


Manufactured by Windlass Steelcrafts®
 
Official product licensed by Royal Armouries. The name Royal Armouries is a registered trademark of Royal Armouries.  All rights reserved. The Royal Armouries is the National Museum of Arms and Armor of the United Kingdom.
€541.20
€676.50
Details View details  
Late 15th Century Sword of Armor
  • -20%
Late 15th Century Sword of Armor
Sword of the Royal Armoury  #IX.1426 .
This knight's sword from the Royal Armouries Collection dates from the late fifteenth century and is possibly of English origin .
This type of sword is a hand-held weapon, of medium to high status, from the late fifteenth and early sixteenth centuries, and would have been used both with and without armor. It would have been a reserve weapon for horsemen, used in combat both on foot and on horseback.
This sword shares some obvious similarities with the Westminster Abbey sword , which has long been associated with Henry V (but is now believed to have come from the funerary remains of Henry VII). It also shares a number of similarities with other English church swords and with depictions of swords in English funerary effigies and bronzes. Due to the state of preservation, it has been suggested that this sword may have been taken from an English church monument in centuries past, where it was probably originally deposited in the late fifteenth century.
Our replica is accurate and faithful, of traditional manufacture, very similar to the original. It has a robust Oakeshott Type XVIII blade measuring just over 79 cm, cutting and pushing, long and curved blades with characteristic terminals, short handle and prominent solid wheel knob. The original has an unusual floral engraving at the base of the blade, which we do not reproduce, because unfortunately in the original it is too damaged to be reproduced with certainty.
The scabbard is made with a wooden body and covered in leather. The tip is reinforced with a brass ferrule . At the mouth of the hem, the leather extends upwards and covers part of the guard.
Manufactured by Windlass Steelcrafts, the original can be seen in the Royal Armouries Collection, Number IX.1426.
Includes Certificate of Authenticity.
SPECIFICATIONS :

Total length : 95cm
Blade length : 78 cm
Width of the Ricasso blade : 4 cm
 Distal cone blade: 0.07 cm 
Weight: 970g
Material: High Carbon Steel, 1075
Edge: Double edge with bevel, not sharp
Balance point : 9.3 cm from the guard


Manufactured by Windlass Steelcrafts®
 
Official product licensed by Royal Armouries. The name Royal Armouries is a registered trademark of Royal Armouries.  All rights reserved. The Royal Armouries is the National Museum of Arms and Armor of the United Kingdom.
€492.00
€615.00
Details View details  
Writhing-hilted sword with scabbard (Royal Armouries), 15º C.
  • -20%
Writhing-hilted sword with scabbard (Royal Armouries), 15º C.
Contorted hilt sword with scabbard (Royal Armouries), 15º C., swordBastard Details:- Blade material: steelCarbon - Handle material: wood with brass fittings, brass handle and guard- Total length: approx. 109 cm- Blade length: approx. 88.5 cm- Blade thickness: approx. 6.2 mm- Handle length: approx. 19 cm (handle: approx. 13 cm)- Maximum blade width: approx. 4 cm- Balance point: approx. 17 cm from the guard- Incl. wooden sheath with cover- Weight without sheath: approx. 1070 g- Sheathed weight: approx. 1380 gImmerse yourself in the world of the Middle Ages with the sword "Writhen Hilt". This finely crafted late medieval longsword impresses with its intricate design and offers an excellent price-performance ratio. It is a Ideal gift for medieval enthusiasts, sword collectors, or a perfect addition to your medieval costume.This beautiful bastard sword is a detailed, high-quality replica of the famous "Writhen-Hilt" sword, which dates back to around 1480 and is presumably of German origin. It owes its name "contort," meaning "twisted" or "contorted," to its unique fist shape. The original sword once belonged to art collectors Frederic Spitzer and William Randolph Hearst before being acquired by the Royal Armouries Museum in Leeds, UK, in 1952.This reconstruction features a double-edged blade approx. 88.5 cm long that tapers towards the tip. The cutting edges are not sharp. The blade has a pronounced medial crest running down the center of the blade, typical of Oakeshott XVIII swords. However, it is believed to be the manufacturer's brand. In reference to this, this replica is engraved on one side of the blade.The handle and cross-guard are made of brass to resemble the original, where these elements have been worked in gilded bronze. The hilt is made of wood and is adorned with two decorative brass rings, one in the center and the other just below the guard. The hilt, quillons, and grip are all artfully sculpted and shaped to resemble a twisted staff of three interlocking branches, which spread out at the ends.The one-and-a-half-handed sword comes with a brown wooden/leather scabbard with a brass throat and chape with Gothic decorations.This medieval sword is designed as a collector's piece or decoration/display, and in addition to its quality as a collectible, it is also perfectly suited as a prop, for example, to complete your costume. Order now and get a piece of history!
€236.16
€295.20
Details View details  
Berserk Blades Snar, Hand and Half Sword
  • -20%
Berserk Blades Snar, Hand and Half Sword
Hand and Half Sword:- Blade material: steelCarbon - Handle material: leather-wrapped wood, steel guard and handle- Total length: approx. 118 cm- Blade length: approx. 92 cm- Blade thickness: approx. 3.5 mm (cutting edges approx. 1.5 mm)- Handle length: approx. 27 cm (handle approx. 19 cm)- Maximum blade length: approx. 5 cm- Balance point: approx. 13 cm from the guard- Incl. wooden sheath with cover- Weight without sheath: approx. 1.4 kg- Sheathed weight: approx. 1.9 kgWith the hand sword and SNAR sock, Berserk Blades expands its collection of modern-focused knives to include historical weapons from the past.SNAR is a classic medieval sword with a functional and minimalist design, crafted entirely in the style of the historical originals. The long, double-edged blade is made of high-quality steel and tapers evenly towards the tip. The sharp edges are not sharp, making this bastard sword ideal as a collector's item, prop, or decoration/display piece. The black leather-covered grip ends in a solid disc pommel with black circular accents on either side. The same detail can be found in the steel guard, the ends of which are slightly curved towards the blade. The sword comes complete with a black scabbard of wood and leather. Two brass buckles allow for easy attachment to a sword belt or leather straps.
€206.64
€258.30
Details View details  
Seneschal Sword
  • -20%
Seneschal Sword
The original sword on which this replica is based is housed in the French Army Museum in Paris (Musée de l'Armée) and was made in Western Europe between 1300 and 1350, during a transitional period in medieval warfare when mail armor was still dominant but was gradually reinforced with additional plates.
Swords of this type were typically used in conjunction with a buckler or shield, making them versatile revolvers on both the battlefield and civilian level.
This particular sword is a faithful reproduction, carefully crafted to the exact measurements of the original. The leaf has a lenticular cross-section with a channel that ends at two-thirds of its length. The sword is classified as Type XIV due to its relatively short blade, with a sturdy, wide profile that tapers into a strong, sharp tip. This rigid blade is ideal for both cutting and stowing, while its considerable width makes it easy to lock and move the opponent's blade. While most Type XIV swords have curved guards and wheel knobs, this one features a straight guard (Oakeshott Style 2) and a spherical hilt topped by a protruding block. The added riveted button block has a practical function as it provides greater length to the tenon. This design feature makes it easy to disassemble or further modify the bar, ensuring its longevity and adaptability. 
Its most distinctive feature is the brass button in the shape of a faceted sphere, with polyhedral faces. While it doesn't exactly fit a single type of Oakeshott, it is very similar to Type R pommels and is reminiscent of those seen later on basket-handled swords, such as those recovered from the sinking of the Mary Rose. 
The sword is even more beautiful because of its details in its design. The combination of the red hilt and scabbard with the yellow brass hilt evokes the image of a high-ranking weapon, fit for a nobleman. This attention to detail extends to the brass cap, where the finial reflects the button, creating a cohesive and elegant design.
This is why he is called The Seneschal, le Sénéschal, (Chief or chief of the nobility, whom he ruled, especially in war or Butler of the Royal House) reflecting the authority and importance of a key figure in the medieval hierarchy.
SPECIFICATIONS:

Total length: 87 cm
Blade length: 71 cm
Blade width: 6.5 cm
Blade thickness: 0.4 cm
Weight: 735 g

Distal taper: 0.48 cm Blade Material: High 1075 Carbon Steel
€324.72
€405.90
Details View details  
Medieval sword from the collection of Edward III
  • -20%
Medieval sword from the collection of Edward III
Measurements: Approximate • LengthTotal Bar: 103 cm / 40.5 inches• Blade Length: 82cm / 32.2inch• Cross Guard Width: 18 cm / 7 inches• Grip Length: 13 cm / 5 inches• Blade width: 4.3–4.5 cm / 1.7–1.8 inches• Approximate blade thickness: 4.8–5 mm• Sheath length: 91cm / 35.8inch
This medieval sword of Edward III, handforged in a traditional way, pays homage to the battlefields of 14th-century England, where swords like these were wielded by knights loyal to Edward III during the Hundred Years' War. The sword design balances historical authenticity with practicality. Visualization and performance artists.
The blade is hand-forged from quality carbon steel, polished to a glossy finish that enhances the clean, wide channel that runs through the center. Although it is not sharp for safety, and especially for... Collector For display use, it retains the powerful characteristic of medieval arms swords, ready to evoke the presence of a knight in his full harness.
A brass wheel knob adds a striking majestic touch and offers counterweight for agile use. The curved brass cross guard of the... Sword Collector It is true to history as it ensures your grip and protects your hand during training or viewing. The full spike of the sword ensures strength and stability during controlled combat or choreography.
This sword collector includes a leather scabbard with brass clasp for durability and classic style. Whether hanging on the wall, with the harness or to complete the outfit at a historical festival, this sword of Edward III embodies the spirit of medieval England.Swords of this shape were common during the reign of Edward III, a time that saw the rise of the professional English longbow archer and heavily armed knights.
Care Instructions:• Storage: Keep your Sword Collector in a dry place. Store it in the capsule, but remove it from time to time to ventilate and prevent moisture buildup.• Cleaning: Wipe the blade with a soft cloth to remove oils and fingerprints.• Lubrication: Periodically apply a light layer of mineral or sword oil to protect against corrosion.• Leather Care: Periodically condition the sheath leather to keep it soft and free of cracking.• HandlingEven dull blades can be dangerous; Always handle them with caution.
Note: As the sword is forged by hand, it may have slight variations. They are signs of traditional craftsmanship. This sword is purely for display purposes and for collectors.
€98.40
€123.00
Details View details  
Collectible naval sword from the nineteenth century
  • -20%
Collectible naval sword from the nineteenth century
Measurements: Approximate


Sheath Length (B): 75cm / 29.5in


Blade Length (L): 65.5cm / 25.7in


Overall Sword Length (D): 80cm / 31.5in


Grip circumference (F): 10.5 cm / 4.1 in


Handle Length (L): 10.8 cm / 4.2 in


Blade Width: 2.5 – 2.8 cm / 0.9 – 1.1 inches


Approximate blade thickness: 4.2-4.5mm


Enter the era of sailing and naval warfare with this nineteenth-century naval sword, inspired by the compact yet powerful portable weapons that sailors and marines of the British Navy used during the Napoleonic Wars and beyond.
Intended for hand-to-hand combat and speed, powermachete was the sailor's trusted weapon for both defending ship decks and attacking enemy ships. This faithful reproduction captures that same spirit, with a curved carbon steel blade that delivers historical accuracy and elegant display value.
The solid brass D-guard provides robust protection in hand-to-hand combat, while the genuine leather-wrapped handle ensures a secure and authentic grip. Its black leather sheath, finished with antique brass details on the throat and top, adds maritime character and completes its period look.
Whether for historical costumes, pirate performances, museum-style exhibitions, or theatrical props, this cleaver is a centerpiece of naval tradition and maritime history. Ideal for:


Historical costumes – British Navy, pirate or privateer costumes


Maritime Museum and Exhibitions


Film and theater props (safe, not sharp edge)


Collectors of naval swords and nautical antiques


Festivals, reenactments, and themed events


Care Instructions:


Keep the Carbon Steel Blade lightly lubricated and stored in a dry environment to prevent rust


Avoid prolonged exposure of brass fittings to moisture to preserve their patina


Clean after each use. with a soft cloth


On specific occasions, leather handle and sheath in good condition. with beeswax or leather conditioner


It is a replica of an exhibition, designed for the purpose of display, costume or interior decoration. Small variations may occur due to the handmade manufacture of each piece.
€118.08
€147.60
Details View details  
Oakeshott Type XVI Tempered Sword
  • -20%
Oakeshott Type XVI Tempered Sword
Unleash the spirit of medieval chivalry with this Oakeshott Sword, created as a faithful inspiration for one of the most important sword designs of the fourteenth century.
This sword is made with a hand-forged steel blade. Its center is thicker and its sides are sloping, forming a diamond that gives it strength and balance, with an appearance faithful to medieval design. The blade is tempered and finished with precision, making it ideal for exhibitions, costumes, and historical costumes.
The sword has a tang construction complete with a bullet pommel, just like the original medieval swords. This method gives you more durability and keeps the bar well balanced. The smooth, polished finish gives it a clean, authentic look.
The handle of this tempered sword is designed for comfortable one-handed use. Its grip is covered with genuine leather for a firm and secure grip. The curved steel guard protects the hand and enhances its classic medieval look. The round disc knob completes the grip and provides perfect balance, as well as increasing historical accuracy.
The sword includes a genuine leather scabbard with shoulder strap. This allows it to be used comfortably at Renaissance fairs, festivals, live role-playing events, or to dress up. When not in use, it also makes it easy to store or display it as a decorative piece.
Overall, this Oakeshott Type XVI sword is a well-crafted medieval reproduction that combines traditional design, clean details, and authentic materials, making it suitable for collectors and medieval enthusiasts.
CARE INSTRUCTIONS:


Keep the blade lubricated to prevent rust.


Wipe with a soft, dry cloth after use.


Store in a cool, dry place away from moisture.


Condition the hem and leather belt from time to time.


Note:
Each sword is individually handmade by expert hands. It is natural for slight variations to occur in surface finish, dimensions, or texture.
€137.76
€172.20
Details View details