SWORD COMMEMORATING THE EIGHTH CENTENARY OF THE BIRTH OF ALFONSO X THE WISE
Spanish sword of the thirteenth century, with a long and wide blade, with two points and a trimmed tip, with a very stretched channel in the center, and gradually decreasing in the last third. Double-edged blade with prominent engravings.
The trim is composed of an arriaz with overgilded silver bath, arms arched towards the leaf, ending in pointed clovers.
In the center of the cross or guard are the arms of Castile on one side and the lion on the other.
The handle is silver-plated on gilded carving on the edges and flats. It is cylindrical, almond-shaped and with an overlapping mesh in a Gothic style.
The pommel is silver-plated on gold in the shape of a flowered ataurich, similar to those that are stamped and gracefully adorn their edges. It is irregularly shaped, with mesh also chiseled in the same style as the cuff.
This sword consists of a chiseled cross with hawks curved towards the blade ending in a clover leaf.
 
NUMBERED SERIES LIMITED TO 800 UNITS
In commemoration of the VIII Centenary of the Birth of Alfonso X "The Wise"
 

Total length: 102 cm
Blade: 83 cm
Handle: 19 cm
Blade width: 55 mm
Width of the cross: 16 cm
Weight: 2 kg
GOLD-PLATED SILVER FINISH / FILIGREE CUFF / IMITATION RUBY APPLIQUE ON THE HANDLE
DEEP ACID ETCHING

 
A high-quality sword from MARTO's exclusive "Collection of Heroes and Civilizations".Certificate of Quality and Origin "Made in Toledo"
 

3-unit katana belt, belt like Roronoa Zoro's in One Piece, made of high-quality synthetic leather. 
Overall Size: 110 cm

Covers were an integral part of clothing throughout the Middle Ages and were worn by all classes. They came with and without a hood and in different lengths and cuts. The cover protected and heated in adverse weather conditions. If the cape did not offer sufficient protection, a hood was worn over it.

Like the unisex cover, the wheel cover or the paper filter are authentic, practical and divided everywhere. The slits serve as armholes and increase comfort. The cover fastens with a wooden button. Contrasting details give the cover a special look.

The cotton fabric is not water-repellent, but it can be treated with a waterproofing spray to repel light rain.

Note: Only the cover is sold here! The other items are available separately in our online shop.

Details:
- Available sizes: One size fits all
- Material: 100% cotton
- Total length: approx. 138 cm (measured at the center of the back)
- Care instructions: Machine wash at 40°C, gentle cycle, do not tumble dry

Battle Shield boss ready for battle made of 2mm steel. Including four rivets.Details:- Overall diameter: approx. 19 cm- Bulge diameter: approx. 12.5 cm- Bulge height: approx. 6.5 cm- Diameter of rivet holes: approx. 5 mm- Material thickness: approx. 2 mm, suitable for combat reconstitution- Weight: approx. 550 g

A large medieval shield boss made of steel. It is fixed to the shield by means of 8 rivets. Rivets are included in delivery.Details:- Overall diameter: approx. 21.5 cm- Bulge diameter: approx. 13.5 cm- Bulge height: approx. 5.5 cm- Material thickness: approx. 1 mm- Weight: approx. 409 g

Ideal for DIY shield projects.Shield bosses are designed to deflect enemy blows and accommodate shield grip. But in addition to their practical function, they could in some cases additionally serve an ornamental purpose.The round shield boss (the so-called umbo) that we offer here is the perfect accessory for ambitious reenactors who want to build their own Roman shield. It is ideal for a parma, but can also be used on a shield (note that the protrusion is not bent, so if it is mounted on curved armor, it must be adapted to the curvature of the armor before mounting).The protrusion is made of brass, blackened on the reverse side, and has four pre-drilled holes to attach it to your shield. Mounting hardware (screws with rounded brass heads) is included in delivery.Details:- Material: Brass- Diameter: approx. 20 cm- Bulge diameter: approx. 12 cm- Bulge height: approx. 6.5 cm- Weight: approx. 230 gSpecifications may vary slightly from part to part.

Shield bosses are designed to deflect enemy blows and accommodate shield grip. But in addition to their practical function, they could in some cases additionally serve an ornamental purpose.The shield boss (the so-called umbo) that we offer here is the perfect accessory for ambitious reenactors who want to build their own Roman shield. It is, for example, ideal as a spare or replacement part for our Roman Imperial Legionary Shield (product no. 1116385300), but it is also perfectly suitable for other DIY shield projects.Our umbo is made of brass, blackened on the reverse and has eight pre-drilled holes to fix it to your shield. Mounting hardware (screws with domed brass caps) is included in delivery.Note that the protrusion is not bent, so if it is mounted on a curved shield, it must be adapted to the curvature of the shield before mounting.Details:- Material: Brass, approx. 1 mm thick- A steel version, product no. 1116675202, is also available.- Length: approx. 25 cm- Width: approx. 19 cm- Bulge diameter: approx. 12 cm- Bulge height: approx. 7 cm- Weight: approx. 300 g Specifications may vary slightly from part to part.

Soldier's Stripe, Training Shield, PolypropyleneDue to popular demand, this is Cold Steel's® Soldier's Targe. Although very similar to Cold Steel's® Medieval Buckler (Product No. 92BKPB), this round shield is about twice the size and is just as robust and reliable.Appropriate for training with all non-steel swords, it is sure to provide years of hard service.Details:- Material: Polypropylene- Diameter: approx. 48.3 cm- Thickness: approx. 13 mm- Weight: approx. 2126 g- Cold Steel® Product No.: 92BKPLIt should not be used in training against metal weapons.Always wear eye protection and appropriate equipment when training.

The sporran is a bag traditionally made of leather or fur. It is worn attached to a leather belt or a chain on the front of the kilt conventionally without a pocket and serves as a purse.Our leather sporran features three leather tassels and is adorned with Celtic designs. It closes with a pin that is attached to the bag by a chain.Delivery includes an adjustable suspension chain with leather strap.Details:- Material: 100% leather- Height: approx. 20 cm- Width: approx. 17.5 cm- Available colors: brown (with braid) or black (with embossed Celtic motif)- Incl. chain

A pinOf kilt usually features traditional Scottish symbols and is worn attached to the front outer apron of the kilt. The pin adds weight to the apron and thus prevents it from opening in the wind.Details:- Material: BrassChrome plated Sword:- Length: approx. 10 cm- Weight: approx. 23 g

Thistle:- Length: approx. 9 cm- Weight: approx. 20 g

Elden Ring Twin Moon Knight Sword Unofficial Replica 106.5cm Steel Blade Finished with Engraving and the Guard and Snitch are nickel finish metallics with brown accents, with a decorated base for hanging.
Overall size: 106.5 cmBlade size: 75 cmThickness of theBlade: 4 mmSupport: SupportedWeight: 1395 gr

Elden Ring Twin Moon Knight Sword Unofficial Replica 106.5cm Steel Blade Finished with Engraving and the Guard and Snitch are nickel finish metallics with brown accents, with a decorated base for hanging.
Overall size: 107 cmBlade size: 75 cmBlade thickness: 3.4 mmCape: ABSSupport: SupportedWeight: 1034 gr

Unofficial replica of the 103 cm Bloodborne saw cleaver made entirely of steel, with a mechanism to fold it, very detailed with a worn effect on the blade and handle.
Overall size: 103 cmBlade size: 51 cmBlade thickness: 8 mmCape: WiredSupport: UnsupportedWeight: 2379 gr

Solo Leveling Sword, unofficial replica of the demon king long sword with 125cm steel blade with red, white and black finish with gold cut, handle with gray finish, with decorated base for hanging. Overall size: 125 cmBlade size: 92.5 cmBlade thickness: 4 mmCape: MetallicSupport: SupportedWeight: 2378 gr

Katana with black black snake-sword. With stainless steel blades.

Details:
- One size fits all- Color: blue/yellow- Material: 100% cotton- Total length in size L: approx. 124 cm (measured in the center of the back)- Care instructions: We recommend hand washing, otherwise discoloration may occur.
This calf length tabard is made of cotton fabric. It is cut straight and open on the sides. With a small ribbon at the waist, the tabard is closed and adjusted individually. The yellow fabric applied in the shape of an arrow on a blue background has a high recognition value.The tabard (also called tunic, dress, tappert, or surcot) appeared in the 12th century and was worn by knights over armor or chain armor. It protected the wearer from sunlight on the battlefield and, through the different color combinations, made it clear in the battle fight who was an enemy and who was a friend.There are numerous depictions of medieval tunics, for example, in the Maciejowski Bible (also Crusader Bible), a medieval Bible from the 13th century, and in the Codex Manesse, a manuscript of songs from the early 14th century.Typical of the tunic is the simple and straight cut. To give the tunic a little waist, we recommend combining it with a leather belt.

Details:
- Available sizes: S/M, L/XL, XXL
- Material: 100% cotton
- Total length for sizes L/XL: approx. 150 cm (measured in the center of the back)
- Care instructions: Machine wash at 40°C, gentle cycle, not suitable for drying in a dryer. We recommend washing your outer clothing and underwear separately, as discoloration may occur.

This classic monk's habit is made of sturdy cotton fabric (twill weave) and consists of two separate pieces. Natural-colored underwear, also called habit, goes floor-length and has a round neckline. The outer piece (also called the scapular) has a generous hood and is fastened with loops at the hips. Both parts can also be used separately.

Thanks to its simple and timeless design, the monk's habit is perfect for many occasions. Whether for medieval or historical reenactments in general, costume parties, Mardi Gras, Halloween, LARP, costume or cosplay, the possibilities for this monk's habit are endless.

The design of this monk's habit (garment of the order) is based on the Cistercian habit and consists of a white habit and a black scapular. This habit has been used by monks and nuns from the Middle Ages to the present day. It is an expression of community and poverty. The garment is always long to the floor and has long sleeves.

Size Chart - Men - Tunic
Size S/M L/XL GXL
Chest (cm) 100 116 120

- Material: Buffalo skin (vegetable-tanned), brass buckles and rivets with aged finish
- Width: dark brown/brown
- Thickness: approx. 2 mm
- Width: approx. 24 cm at the centre front, approx. 14 cm at the sides and back
- Width of each belt: approx. 2.2 cm each
- Inner diameter of the buckles: approx. 2.3 cm each
- Weight of size L: approx. 800 g
- Waist circumference:
Size S approx. 70 - 85 cm
Size L approx. 85 - 110 cm
XXL size approx. 110 - 130 cm

This elaborately crafted leather belt is made from thick vegetable-tanned buffalo leather (grained leather). Its surface and edges are polished and given a light-coloured finish, giving the leather its characteristic worn look.

This impressive belt is made up of three individual belts that run through a wide centerpiece. The three narrow belts are decorated with a delicate braided pattern and fastened with brass-coloured buckles on the back. The wide centerpiece is engraved with a Nordic knot motif and adorned with dragon-shaped brass fittings. A sturdy stitching made of sturdy leather frames the centrepiece, giving the belt extra character and durability.

This belt can be used by both men and women. It gives any warrior a magnificent appearance.

Only the belt is for sale! The other items in the photo are available separately in our online shop.

The above-mentioned specifications may vary slightly from part to part.

Note that leather is a natural product that requires extensive manual processing. Therefore, slight variations in appearance may occur. Therefore, no two leather belts are the same.

Legend of Zelda dagger, unofficial model, with a total size of 32 cm, blue steel blade, the scabbard is ABS with blue and gold decorations.
Overall size: 32 cmBlade size: 19 cmBlade thickness: 2'4 mmWeight: 107 gr

Kamish's Wrath dagger from Solo Leveling, unofficial replica, with a total size of 61 cm, steel blade with red finish with black top details, black guard and purple handle. Supported.
Overall size: 61 cmBlade size: 35 cmBlade thickness: 4 mmSupport: SupportedWeight: 750 gr

Dagger of Kamish's Wrath daggers from Solo Leveling, unofficial replica, with a total size of 61 cm, steel blade finished in red with details on the top in gold, guard and handle in purple. Supported.
Overall size: 61 cmBlade size: 29 cmBlade thickness: 4 mmSupport: SupportedWeight: 1495 gr

Antares' Fangs dagger from Solo Leveling, unofficial replica, with a total size of 62.5 cm, steel blade finished in purple with gold details on the top, guard and handle in black with gold and purple details. Supported.
Overall size: 62.5 cmBlade size: 35.5 cmBlade thickness: 4 mmSupport: SupportedWeight: 1122 gr

The original sword on which this replica is based is housed in the French Army Museum in Paris (Musée de l'Armée) and was made in Western Europe between 1300 and 1350, during a transitional period in medieval warfare when mail armor was still dominant but was gradually reinforced with additional plates.
Swords of this type were typically used in conjunction with a buckler or shield, making them versatile revolvers on both the battlefield and civilian level.
This particular sword is a faithful reproduction, carefully crafted to the exact measurements of the original. The leaf has a lenticular cross-section with a channel that ends at two-thirds of its length. The sword is classified as Type XIV due to its relatively short blade, with a sturdy, wide profile that tapers into a strong, sharp tip. This rigid blade is ideal for both cutting and stowing, while its considerable width makes it easy to lock and move the opponent's blade. While most Type XIV swords have curved guards and wheel knobs, this one features a straight guard (Oakeshott Style 2) and a spherical hilt topped by a protruding block. The added riveted button block has a practical function as it provides greater length to the tenon. This design feature makes it easy to disassemble or further modify the bar, ensuring its longevity and adaptability. 
Its most distinctive feature is the brass button in the shape of a faceted sphere, with polyhedral faces. While it doesn't exactly fit a single type of Oakeshott, it is very similar to Type R pommels and is reminiscent of those seen later on basket-handled swords, such as those recovered from the sinking of the Mary Rose. 
The sword is even more beautiful because of its details in its design. The combination of the red hilt and scabbard with the yellow brass hilt evokes the image of a high-ranking weapon, fit for a nobleman. This attention to detail extends to the brass cap, where the finial reflects the button, creating a cohesive and elegant design.
This is why he is called The Seneschal, le Sénéschal, (Chief or chief of the nobility, whom he ruled, especially in war or Butler of the Royal House) reflecting the authority and importance of a key figure in the medieval hierarchy.
SPECIFICATIONS:

Total length: 87 cm
Blade length: 71 cm
Blade width: 6.5 cm
Blade thickness: 0.4 cm
Weight: 735 g

Distal taper: 0.48 cm Blade Material: High 1075 Carbon Steel

Templar sword, stainless steel, ABS and steel handle, with steel scabbard, blade size 65.5cm

Blade size: 44.00 cm
Handle size: 16.00 cm
Overall size: 60.00 cm
Steel Type: Stainless Steel
Blade Type: Broadsword
Finish: Satin
Blade thickness: 3.42 mm
Handle type: ABS & Zinc/Black
Chainstay Type: ABS & Zamak
With ferrule
Weight: 308.80 grams

Blade size: 43.00 cm
Cable size: 17.00 cm
Overall size: 60.00 cm
Steel Type: Stainless Steel
Blade Type: Sword
Finish: Satin
Blade thickness: 3.70 mm
Cable Type: ABS & Zinc/Brown
With ferrule
Weight: 322.00 g