Step into the thrilling world of Westeros with this exquisite replica of Viserys Targaryen's sword, seen in the "House of Dragon" series. This decorative replica is a must-have for fans and collectors alike, reflecting the power and elegance of House Targaryen.

The kettle hat or war hat, a fairly simple helmet in the shape of a brim hat, came into vogue in the 13th century and enjoyed great popularity among foot soldiers, archers, crossbowmen, pikemen, and men-at-arms throughout Europe until the 15th century. It owes its name to its resemblance to a pot (originally called a kettle).Although kettle hats existed in many variations, they all shared the same main feature: a wide brim that offered protection against downward sword blows and projectiles fired or dropped from above, without impairing the wearer's vision, hearing, or breathing. This design proved useful during sieges and massed infantry battles and contributed primarily to the enduring prevalence of this type of helmet. The so-called sallet developed from the kettle hat in the fifteenth century.This reconstruction of a late medieval kettle hat is made of 1.6 mm steel (16 gauge). The edge of the flap is wrapped all the way around and four bands or plates (in German called Spangen) are arranged decoratively in the shape of a cross on the helmet bowl. In the overlapping areas, the thickness of the material is more than 5 mm. Dark brown leather straps with aged brass buckle are riveted to the two cheek guards.The interior is blackened for better corrosion resistance. It is equipped with an adjustable padded lining made of high-quality black fabric and fastened with rivets. Suitable for light combat staging, LARP, stage or TV/film, this wearable helmet is best suited for late medieval scenarios and ideal for completing the armour of a European warrior. Of course, it will also be a great addition to any helmet collector's treasure chamber.

This wearable reconstruction of a late medieval plate armor for the throat and neck (or rather for the upper torso) is made of 1.2 mm (18 gauge) steel. The gorges have the multilayered appearance typical of Gothic plate armor from the late Middle Ages (century. XV/XVI). It consists of two parts – one piece for the chest and one for the back, which are hooked on one side and closed with a strap and buckle on the other side. The riveted, approx. The 2mm thick leather strap is adjustable to ensure a comfortable and personalized fit for optimal protection.The rounded edges of the neck plates are adorned with small steel rivets and grooves in the neckline. The back is blackened for better corrosion resistance.This collar is ideal for late medieval and Renaissance environments. Equally suitable for the representation of a wide range of historical figures and fictional/fantasy characters, it will make your transformation into a proud and noble knight or warrior perfect, whether used for medieval reenactment, LARP, stage, TV/film, fantasy or cosplay.Details:- Material: 1.2 mm (18 ga) steel plate, brown leather straps, aged brass buckle-Max. Width (at shoulder height): approx. 31 cm- Neck opening (diameter): approx. 16.5 cm- Weight: approx. 790 gSpecifications may vary slightly from part to part.Delivery includes only the gorget! The other armor pieces illustrated above are available separately in our online store. Observation:To ensure this armor is right for you, remember to take your measurements over your gambeson and/or any piece of clothing or chainmail you plan to wear underneath!The steel used here is not rust-proof and may have slight surface stains in places. We recommend that you maintain plate shielding regularly, for example by using Ballistol Universal Oil, which is ideal for caring for steel.

This wearable, fully articulated reconstruction of a late medieval plate armor for the arms is made of 1.2mm steel (18 gauge) and blackened on the inside for better corrosion resistance. It is intended to protect the forearms, elbows and arms, and has the typical multilayered look of Gothic plate armor from the late Middle Ages (century. XV/XVI).Arm protection consists of a couter or cowter (also known as an elbow pad), a vambrace or lower cannon, and a rerebrace or upper cannon. For adequate freedom of movement, all parts are connected to each other by sliding plates or hinged plates on sturdy steel rivets.At the rear, each arm is equipped with three adjustable riveted arms of approx. 2mm thick leather straps with brass buckles for a comfortable and personalized fit.The edges are adorned with grooves and small steel rivets, and the elbows feature flower-shaped, slightly concave steel rondels that are riveted to the sides (see also our besagews – product no. 1016634200).This articulated arm harness is ideal for medieval and Renaissance environments. Equally suitable for the representation of a wide range of historical figures and fictional/fantasy characters, it will make your transformation into a proud and noble knight or warrior perfect, whether used for medieval reenactment, LARP, stage, TV/film, fantasy or cosplay.Arm guards are sold in pairs.

From the fourteenth century, Swiss pikemen established themselves as dominant mercenaries. But an equally brave and robust competitor appeared later, coming from Germany. The Landsknecht troops challenged Swiss superiority in a "No Quarter" rivalry that lasted for years. The extravagantly dressed German mercenary Landsknecht lived a harsh and brutal life and was famous for his giant two-handed sword Flamberge. After using the Flamberge to break the enemy front-line line of pikemen, a smaller one-handed sword was employed for the ensuing hand-to-hand combat - the Katzbalger.Not as sophisticated as its somewhat frivolous-looking (but still deadly) older brother, the Katzbalger (which roughly translates to "cat trough") was still highly stylized and was designed to be an effective slash-and-thrust sword. Carried by all Landsknecht troops, including the pikemen and arquebusiers, this sword had an ornate guard in the shape of a closed "S" and an extra-long, fluted hilt. The Katzbalger certainly respected his Renaissance roots. The beautifully rendered grip would make any Landsknecht proud. The fluting on the handle extends perfectly to the wooden handle, and the guard is expertly twisted into a spiral and ends in half spheres. The high-carbon hardened steel blade is adorned with a trio of fullers that lightly illuminate the blade. The black leather scabbard is lightly decorated with leather bands that crisscross each other and are tied near the throat and has a unique steel tip. The guard has approx. 11 cm wide. The blade is disally tapered, which helps to keep the weight of the sword at approx. 1.13kg.

If you're a fan of Bleach, you know that the Bankai Cutting Moon katana sword is one of the most impressive weapons seen in the series. And now, you can have a replica in your collection for a very affordable price. This wooden sword showcases the iconic design of the Tensa Bankai, an improved version of the Zangetsu used by Ichigo in the series.

The 117cm black blade is made of 440 stainless steel and has a solid black liquid finish that makes it very realistic. The 42cm strap is wrapped in fabric for a comfortable grip. The manji-shaped handguard, which means "complete prohibition" in Japanese, is one of the most distinctive features of this sword.

The Bankai Cutting Moon sword has a total length of 170 cm and weighs 2.4 kg, making it a very solid and attractive replica.

This sword is ideal for displaying in your Bleach collection or as part of your Ichigo cosplay. Plus, it's a great gift for any fan of the series or Katana in general. With its quality and affordable price, you won't regret adding this sword to your collection.

Overall size: 18 cm
Material: High Quality Resin
Inner glass: Aluminum
Registered Model

Overall size: 13.5 cm
Material: High Quality Resin
Interior: Aluminum

The 29152 three-piece set consists of Katana, Wakisashi, and Tanto. The black scabbard is sculpted with dragon details. 100 cm katana, 77 cm Wakisashi and 52 cm tanto, the blades are made of steel, black cord handle, with support

Forging pliers, approx. 27 cmThis forged flat nose pliers is the ideal tool for blacksmiths and craftsmen. The rustic pliers are the perfect accessory for medieval markets or camps.Details:- Length: approx. 27 cm- Jaw length: approx. 5.5 cmObservation:The above specifications may vary slightly from part to part.This is an original ULFBERTH® product.

This two-handed sword is an interpretation of one of the silver swords from the popular "The Witcher" franchise . In this game from the developer studio CD Projekt RED, the sorcerer Geralt of Rivia always carries with him two types of sword: a steel sword, which he uses in the fight against human and animal opponents, and a silver sword, which the monster hunter uses against many different creatures.The most distinctive feature of this sword is probably the decorative element on the cross guard. This one is based on the brooch of Renfri from the first episode of the adaptation of the series "The Witcher". Background of the brooch based on the TV showThe wizard Stregobor attempted to hire Geralt to kill Renfri, as he believed she was under the curse of the Black Sun and thus posed a threat to the entire continent.Renfri, on the other hand, wanted revenge against Stregobor, as her actions forced her out of her old life. She gathered a band of bandits around her and planned to force the wizard out of her tower with a bloodbath among the residents of Blaviken. When Geralt tried to dissuade Renfri and his entourage from his plan, a fight broke out between them, from which Geralt emerged as the sole survivor. He took Renfri's pin and attached it to his sword as a reminder not to interfere in human conflicts. As a result of these events, Geralt became known as the "Butcher of Blaviken". The fullest part of this magnificent 420 high-carbon steel blade is adorned with gold lettering on both sides. Smiling at you at the end of the rim is the ornamental element mentioned above, which merges with the guard and, like the guard, is made of molten zinc. This is followed by approx. Handle with 15 cm in length, decorated with diamond pattern. The whole thing is completed by an ornate pommel with a perfume cap, which is also made of molten zinc. When stowed in its leather-covered scabbard, this sword has approx. 117.5 cm long and weighs approx. 1.75kg.

Containing all the features expected from the swords in the series, the Wasteland Gladius design emerges from the larger gladius designs with a pronounced "wasp waist" or "leaf blade" curvature. The long handle allows for easy use of the sword with one or two hands, making the Wasteland Gladius probably one of the most versatile swords in the series. The black textured fiberglass sheath is fitted to a Molle-compatible kydex platform that allows you to attach your swords to your belt or pack them in various carrying positions. The platform has four slots for belt or sling carry configurations.

The straight-cut shirt is a classic of medieval and versatile clothing. With short sleeves, it is perfect to wear as a pirate, squire or knight shirt.

The Este shirt is made of fine cotton fabric and is comfortable to wear. It has a high collar and bow at the neckline.

Details:
- Available sizes: 110, 128, 146, 164
- Color: natural
-Material: 100% cotton
Care instructions: Machine wash at 40°C, gentle cycle, do not tumble dry
- We recommend removing the wooden beads before washing, otherwise discoloration may occur
Below you will find the right size:
To determine the size of your child's clothing, check the height (if your child is 128 cm tall, ask for size 128).
The total length shown in the size chart is the length of the back, measured in the center of the back.

Markward's Knight's Tent, 5 x 8 m
This square medieval tent offers enough space for any purpose, whether as a medieval market stall, canopy or sun protection cover (no sidewalls) or as a sleeping tent for about 8 occupants with their belongings and equipment. The all-round valance makes it a real eye-catcher. With a few helping hands, the tent can be assembled and disassembled quickly. Due to the high side walls, you have enough space wherever you are. This rider's tent is truly versatile. The two individually detachable sidewalls can be easily removed or fixed with hooks and eyelets and give you the freedom to leave one side or the other open, or simply leave both walls out and use the tent as a canopy.
The Markward knight's tent is treated against mold and mildew. Thanks to its particular fabric (twill), the 100% cotton canvas is exceptionally tear-resistant and virtually water-proof, making this medieval tent an indispensable piece of equipment for medieval markets, military camps or LARP events.
Our tents and tarpaulins have already been waterproofed. To maintain/restore the water repellency of your tent or tarpaulin and enjoy its use for a long time, we recommend regular treatment with a waterproofing spray, e.g. PLUVONIN .
The tent is supplied in complete set, i.e. with poles and accessories.

This heater shield is handmade with approx. Plywood 1 cm thick. The outer cover is canvas and on the back you find a soft leather-covered arm lining. In addition, there are adjustable leather straps fixed to the wood. The shield is in white and can easily be painted with your own coat of arms or with the colors of your group. Of course, you can also repair any matching shield boss.Details:- Material: plywood, canvas and leather- Material thickness: approx. 10 mm- Height: approx. 118 cm- Folded width: approx. 77 cm- Interior width: approx. 58 cm- Curve radius: approx. 22 cm- Weight: ca. 3.2kg

This beautiful one-handed sword is a replica of one of the best-preserved medieval swords. The original was owned for some time by E.A. Christensen, a well-known Danish sword collector. His drawings of the medieval sword were featured in the book "Gammelt Jern" published by A.B. Hoffmeyer in 1968. It is classified as Type XIV according to the Oakeshott typology and dated to the period between 1275 and 1340. The location of the find of the original sword, now on display at the National Museum of Denmark in Copenhagen, is unknown.The sword has a broad, double-edged blade that narrows toward the tip. Two deep fullers run almost the entire length of the blade and the cutting edges are not sharp.The quillons are slightly curved and the wooden handle wrapped in red leather ends in a K-type pommel with faceted edges. The center of the pommel is adorned with red circular accents on both sides.This sword comes complete with a red wood and leather scabbard equipped with a brass cover and a beautiful sword belt made of sturdy leather. The belt can be adjusted in various sizes thanks to the flower-shaped brass eyelets.Note that this medieval sword is not a battle-ready weapon. It is designed as a collector's piece or decoration/display and is not suitable for combat reenactment. In addition to collector's quality, it is also perfectly suited as an accessory, for example to complete your costume.Details:- Blade material: High carbon steel- Rockwell hardness: approx. 48 – 52 HRC - Handle material: leather-coated wood, steel handle and guard- Total length: approx. 99 cm- Blade length: approx. 79 cm- Blade thickness: approx. 4.8 mm- Handle length: approx. 19 cm (grip approx. 10 cm)-Max. Blade width: approx. 6 cm- Balance point: approx. 10.5 cm from the guard- Incl. wooden sheath with genuine leather cover and brass cover, leather belt- Weight without sheath: approx. 1.8 kg- Sheathed weight: approx. 2.6 kgSpecifications may vary slightly from part to part.The steel used here is not rust-proof and may have slight surface stains in places. We recommend that you maintain the blade regularly, for example by using Ballistol Universal Oil, which is ideal for caring for steel.

This beautiful sword is a replica of the Imperial Sword of the Holy Roman Empire. Because it is also associated with Saint Mauritius, it is also known as Mauritiusschwert. This sword is part of the Imperial Regalia of the Holy Roman Kings and Emperors and was given to the Emperor along with the other Imperial Regalia during a coronation. The original is on display in the Imperial Treasury at the Hofburg Palace in Vienna, Austria.The reconstruction we offer here has a long, double-edged blade that tapers slightly toward the tip and is fuller along about two-thirds of its length. The edges are not sharp.The cross-shaped hilt ends in a Brazil nut apple made of brass and engraved with the arms of the Holy Roman Emperor Otto IV."BENEDICTVS . Do(minv)S . DE(v)S . QVI . DOCOT. MANV(s)+"("Blessed be the Lord my God, who teaches the hand [to handle]").The cross guard is also inscribed on both sides with Latin inscriptions taken from the Laudes Regiae."CHRISTVS - VINCIT - CHRISTVS - REIGNAT - CHRISTVS - INPERAT"("Christ conquers - Christ reigns - Christ commands")The last part "CHRISTVS - INPERAT" is engraved only on one side of the quillons.This medieval one-handed sword comes complete with a wooden scabbard wrapped in high-quality ochre leather. Two adjustable belt loops are attached to the hem so that it can be easily attached to the belt. Note that this medieval sword is not a battle-ready weapon. It is designed as a collector's piece or decoration/display and is not suitable for combat reenactment. In addition to collector's quality, it is also perfectly suited as an accessory, for example to complete your costume.Details:- Blade material: High carbon steel- Rockwell hardness: approx. 48 – 52 HRC- Handle material: wooden handle coiled with brass wire, brass guard and pommel- Total length: approx. 104 cm- Blade length: approx. 89.7 cm- Blade thickness: approx. 5 mm- Handle length: approx. 14 cm (grip approx. 10 cm)-Max. Blade width: approx. 4.6 cm- Balance point: approx. 22.5 cm from the guard- Incl. wooden sheath with genuine leather cover - Weight without sheath: approx. 1.5 kg- Sheathed weight: approx. 2 kgSpecifications may vary slightly from part to part.The steel used here is not rust-proof and may have slight surface stains in places. We recommend that you maintain the blade regularly, for example by using Ballistol Universal Oil, which is ideal for caring for steel.

This beautiful medieval sword engraved with Templar symbols is not an exact replica of an original find, but rather a tribute to the Knights Templar.The Templar sword features a double-edged blade that narrows toward the tip. A fuller runs almost its entire length and is engraved with a Templar cross on either side. The brass cross guard is also engraved with Templar crosses. The leather-wrapped black wooden handle ends in a sturdy disc-shaped pommel, adorned with background crosses (clover).This sword comes complete with a black wood and leather scabbard with a steel throat, cape, mid-band and hinged suspension rings. The head and throat are also adorned with brass decorations.We also offer the complementary weapon to this sword, the Templar Militia Templi dagger (item no. 0216703818).Note that this medieval sword is not a battle-ready weapon. It is designed as a collector's item or as a decoration/display and is not suitable for combat reenactment. In addition to its quality as a collectible, it is also perfectly suitable as a prop, for example, to complete your costume.Details:- Blade material: High carbon steel- Rockwell hardness: 48 – 52 HRC - Handle material: leather-covered wood- Total length: approx. 96 cm- Blade length: approx. 78.5 cm- Blade thickness: approx. 5 mm- Handle length: approx. 17 cm (grip approx. 11 cm)-Max. Blade width: approx. 4.5 cm- Balance point: approx. 15.5 cm from the guard- incl. wooden sheath with genuine leather cover and steel accessories- Weight without sheath: approx. 1.37 kg- Sheathed weight: approx. 1.9 kgSpecifications may vary slightly from part to part.The steel used here is not rust-proof and may have slight surface stains in places. We recommend that you maintain the blade regularly, for example by using Ballistol Universal Oil, which is ideal for caring for steel.

With the power and cutting ability very well covered by the Outback™ and Red Rock Raptor™, the Down Under Knives turned their attention to speed. They set out to create the fastest, best-handling combat knife they could create, with the right balance and reach so as not to compromise anything. The result is the new Death Adder™The 440C full-tang construction and the uniquely contoured solid ebony grip make the Death Adder™ exceptionally strong and easy to handle in any hand, in any position. Down Under Knives consulted with martial arts experts and hunters to find the right blade dimensions to achieve what needed to be achieved without sacrificing speed and agility. The genuine leather sheath is also thick and rigid enough to ensure that the blade can be accessed instantly, without jamming or snagging. Just like with Bush Dagger ™, the safety strap comes off in the same fluid motion you use to grip the dagger, and the positioning of the belt strap ensures that the scabbard won't flex or follow.The blade is not sharp.Details:- Blade material: 440C heat-treated stainless steel- Handle material: ebony wood- Total length: approx. 27.1 cm- Blade length: approx. 15.4 cm- Blade thickness: approx. 5 mm - Weight: approx. 265 g- Sheathed weight: approx. 330g-Incl. Leather sheath

By the mid-1600s, dueling was at the height of its popularity. In fact, this tendency to settle matters of honor with steel reached such heights that King Louis XIII of France banned dueling for fear of losing many of his important dignitaries to this dangerous pursuit!Aristocratic nobles saw it as their manly duty to defend their honor at the point of the sword, and as such, they began not only to seek the knowledge and training imparted by expert sword masters, but also to explore new types of weapons to help them gain a decisive advantage. One sword in particular began to gain popularity—a smaller, lighter, and faster version of the rapier that was easier to carry and faster in combat. A precursor to what would become the Smallsword, referred to by many simply as the transitional rapier.Cold Steel's® interpretation of this blade (which has been called the Cavalier Rapier) features a sharp, double-edged, needle-tipped blade that is decidedly shorter and lighter than a classic rapier, allowing for much more speed and agility. With a perforated hardened steel shell protector, rings, quillons and brass knuckle bow, it offers surprisingly good hand protection, while its wire-wrapped handle and pommel counterbalance give great comfort and liveliness in the hand.

Having a high-quality and safe tool to practice your sword skills is of utmost importance! You shouldn't have to worry about safety when you're working to become a sword master. Constructed from the highest grade of polypropylene available and closely mimicking a real medieval sword in length, size, weight and feel, our practice sword has the advantage of being virtually unbreakable, as well as, remarkably rigid and cut resistant. It will take years and years of abuse!Details: - Sword- Material: Polypropylene- Total length: approx. 110.5 cm - Blade length: approx. 84.1 cm- Weight: approx. 726 g- Manufacturer's Product Number:UC3312

Spectacular replica of the axe Ragnar Lothbrok uses in the famous Vikings series
Ragnar Lothbrok is the protagonist of the Vikings series, a series in which the story of this controversial civilization of adventurers and saws is told.
This axe is a faithful replica of the one used by Ragnar, with quality stainless steel head, wooden handle

This katana is a decorative interpretation of the sword that Tanjiro Kamado wields in the anime Demon Slayer: Kimetsu no Yaiba.It has approx. 67.5 cm long, slightly sharpened blade made of high carbon steel. Its tsuka is wrapped in a black imitation leather band and lined with imitation red lightning bolt. Its tuba is painted black and has the shape of a wheel with many spokes. The black-coated saya is made of wood.Tanjiro's Nichirin BladeTanjiro joined the Demon Slayers in the anime/manga to find the demon that killed his family and turned his younger sister Nezuko into a demon.After passing the selection process, Tanjiro was allowed to choose the material from which his Nichirin Sword (Sun Blade) would be forged. These are special blades made exclusively for the Demon Slayer Corps by highly skilled blacksmiths. They are made from scarlet sand and ore found on Mount Yoko. These materials were perpetually bathed in sunlight, giving them the ability to kill demons. Another special feature of this blade material is that the color of the blade changes when it is drawn by its owner for the first time. After Tanjiro's blacksmith, Hotaru Haganezuka, gave him his sword, the blade turned pitch black, which is considered a bad omen as black sword owners never lived long.But this black blade serves the young demon hunter well, even though Tanjiro repeatedly clashed with his blacksmith because he kept damaging or even breaking his sword.Please note that this katana is designed as a collector's item or decorative object.Details:- Blade material: High carbon steel- Total length: approx. 95.5 cm- Blade length: approx. 67 cm- Cable length: approx. 28.5 cm- Blade thickness: approx. 4 mm- Weight: approx. 670 g- Sheathed weight: approx. 880 g

Katana - Sandai Kitetsu This decorative sword was inspired by the Sandai Kitetsu, which pirate hunter Lorenor Zoro (jap. Roronoa Zoro) wields in the anime One-Piece. The Sandai Kitetsu belongs to the sword grade and, therefore, to the 4th place in the sword classification within anime and manga.
It has approx. 67.5 cm long, slightly sharpened blade made of high carbon steel, its tsuka is wrapped in a red band. The unconventional decorative elements of tsuka and saya, such as the cross-shaped tsuba, are made of gold anodized aluminum.
The richly decorated red-coated saya is made of wood and has a red stripe wrapped around the middle. Story behind the sword It was made by Kozuki Sukiyaki, one of the best blacksmiths in Wano, as an imitation of the Nidai Kitetsu (one of the 21 high-quality swords). The term Sandai indicates that the Sandai Kitetsu is the third sword in a series of swords bearing the name Kitetsu.
 This katana from the isolated island of Wa no Kuni somehow made its way to the Ipponmatsu arms dealer's shop in Loguetown. Zorro went to this shop to replace his two swords, after they were broken in the fight with Hawk Eyes Mihawk.
He discovered the Sandai Kitetsu in a barrel full of tailings and immediately recognized the high quality of the sword. However, when the shop owner realized that his customer had chosen this particular blade, he forbade him to buy it and then told him about the curse of this katana, which would bring its owner a horrible death. Zoro was intrigued by this concept and decided to test his luck against the curse; He threw the spinning sword into the air and stretched out his arm resolutely, ready to lose it if fate turned against him.
But the blade missed his arm by a hair's breadth, spun around him, and sank three-quarters into the store's wooden floor of weapons. Impressed by this stressful action, Ipponmatsu rushed to the attic of his shop to fetch his family's heirloom, the Yubashiri, which he then gave to the swordsman along with the Kitetsu.
 Since then, Kiketsu has served the three-sword-style swordsman well, though he describes him as his troubled son who needs more attention than his other swords. But he proved his worth in his numerous fights against increasingly strong opponents. Please note that this katana is designed as a collector's item or decorative object.
Details: - Blade material: high carbon steel - Total length: approx. 96 cm - Blade length: approx. 67.5 cm - Cable length: approx. 28.5cm

Weight 640 grams

Do you feel like reliving a Viking hunt in the dense forests? You should probably take this sturdy Viking axe with you!
The handle of the axe is made of real, ethically sourced TEAK WOOD. The axe head is meticulously hand-forged from durable carbon steel, making it sturdy and effective. It measures approximately 76 cm in length.

If there's one thing a medieval archer swore by, it was the sturdy axe he carried with him; and it was wise! Whether it was a jungle hunt or combat, this axe would always save their lives. Represent your medieval warrior character or win the next LARP event, this axe will fit you perfectly.
The axe head is made of heavy-duty carbon steel and strongly hinged on a genuine teak wood handle. The total length of this axe is approx. 20.1 inches.