Full Plate Armors

-20%

Aluminio mesh quota

Steel mesh lorigão, blackened, ID 8mm. Rings in carbon steel 4 in 1.
Finish: Rings are blackened and protected from corrosion with oil
Ring thickness: 1.6 mm.
Weight approx: 10 - 14 kg.
Available sizes:

Size
M
L

Chest circumference

125 cm

140 cm

Total length
83 cm
85 cm

€137.00

€171.25

-20%

Lorigão in Steel mesh - zincada, short sleeve

Steel mesh lorigão, zincada, ID 9mm.Rings in carbon steel 4 in 1.Ring thickness: 1.6 mm.Weight approx: 6.35 - 8.8 kg.Available sizes:SizeMLChest circumference124 cm132 cmTotal length63 cm70 cm

€105.39

€131.73

-20%

Lorica Roman segmentata

Lorica segmentata made of 18G steel with cast brass details. The lorica segmentata is the name given to the armor worn by roman legionaries during their time of splendor (1st century BC, 3rd century AD). The name comes from the Latin word for segmented, which refers to the division into metal plates of the armor.

€232.72

€290.90

-20%

Lorata Roman legionnaire Hamata

Roman Legionnaire Lorraine Hamata made with 8 mm steel rings. in diameter. Shoulder cover is sharp.

€241.98

€302.47

-20%

Mesh dimension

Mailing shirt. Manufactured with steel rings.

€147.54

€184.43

-20%

RRZ Mesh dimension, mesh dimension, riveted, zincada

RRZ Mesh dimension, mesh dimension, riveted, zincada- Battle-Ready -This high quality handmade knit quota is called the Mesh Dimension, which means it has long sleeves and reaches the knees. Such a powerful chain armor covers most of the body.

€504.20

€630.25

-20%

RRZ9 Knitted quota shirt, Haubergeon, riveted, zincada

RRZ9 Knitted quota shirt, Haubergeon, riveted, zincadaBattle-readyThe haubergeon (= small Hauberk) is a mid-sleeved knitted shirt that reaches up to the thighs.The RRZ mesh quotait is manufactured with round rings of galvanized steel. Each ring was riveted by hands with round rivets. It is woven in pattern 4 in 1.Galvanization offers - in contrast to the natural and smooth mesh finish - a fairly good protection against corrosion.

€340.34

€425.42

-20%

Viking helmet with mesh dimension

Last items in stock

Medieval Viking helmet in polished steel with mesh dimension, 1mm thick and leather strap. Includes foam cushion. T-M (circumference of 60 cm). T - L (67 cm circumference).

€85.24

€106.55

-20%

Cross-helmet, 2 mm steel, with leather coating

Last items in stock

Cross-helmet, 2 mm soft steel, with leather coating
Ready for battle

Attractive reconstruction of a large transverse ca rudder. 1180 A.D., also called pot hull, bucket hull and barrel rudder. Includes a very comfortable leather inlay as well as a chin strap with buckle.

€169.55

€211.94

-20%

Battle-Ready Helmet

Made of steel with 2 mm thicknessAvailable in three sizes (display size on order)Size S: for head circumference approx. 59 cmSize M: for head circumference approx. 61 cmSize L: for head circumference approx. 62 cmWeight approx: 1.5 kgIt features inside lining and adjustable leather strap.

€73.80

€92.25

-20%

Morion Helmet

Last items in stock

The Morion of the Epic Armory is a steel helmet inspired by the Spanish conquerors of the fifteenth to sixteenth centuries, conquering the world for Gold, God and Glory.

€111.59

€139.48

-20%

Helm Crusaders

Last items in stock

Epic Armory's Crusader Helmet is a closed helmet designed to protect the head during combat.

€101.05

€126.31

-20%

Helm Templario with nasal "St. Wencelass"

This helmet is a replica of the original "Wencelas", dating from the 10th century.It is made of steel with 2mm thickness and reinforced in the nasal.Includes adjustment straps, leather.Sizes available:
M: up to 62 cm head circumference
Weight: from 2.15 to 2.55kg

€123.00

€153.75

-20%

Broquel with 2 bands, ca., 2mm steel

Broquel with 2 bands, ca. 23cm, 2mm steel
Broquéis, shields fastened with the fist, were often used in combination with one-hand swords, from the high middle ages to the Renaissance. They are useful to protect as well as to give blows.
Our ULFBERTH ® are available in three sizes (S, M, L). The handles are riveted and slap-on in leather.
Details:
- Diameter: approx. 23 cm
- material: 2 mm steel
- Weight: approx. 0.9 kg

€62.18

€77.73

-20%

Leather-covered buckler

A defensive weapon widely used in Europe from the Middle Ages to the Renaissance.Features:Diameter: 23cmSteel thickness: 1.6mm

€58.81

€73.51

-20%

Buckler with 4 plates

Buckler with 4 plates, 2mm steelThis round buckler is reinforced with 4 steel plates. Bucklers, shields attached with the hilt, were often used in combination with swordsfrom the high Middle Ages to the Renaissance. They are useful for protecting and also for delivering blows. Our ULFBERTH® bucklers are available in sizes S, M and L. The straps are riveted and wrapped in leather. Details: - Diameter: approx. 23cm (S), 30cm (M) or 38cm (L) - Material: 2mm steel - Weight: approx. 0.9kg (S), 2kg (M) or 2.3kg (L) This is an original ULFBERTH® product.

€58.81

€73.51

-20%

Backplate for Dark Warrior and Dark Drake

Backplate for Dark Warrior and Dark Drake

Epic Armory's Dark Warrior Back Plate is a low-fantasy armor piece that matches the Dark Warrior Chestof the Epic Armory and Dark Darkness, protecting the back and spine.

Size
Length approx.
Width approx.
Weight approx.

S
31 cm
47 cm
1.5 kg

M
37 cm
54 cm
2 kg

I
39 cm
60 cm

2.25 kg

€182.71

€228.39

-20%

Black Drake Pectoral

Black Drake Pectoral, var. Sizes

Drake's Dark Pectoral from Epic Armoury is a finely sculpted piece of armor that protects the front of the trunk, chest and abdomen.

€210.77

€263.47

-20%

Viking helmet

Gjermundbu helmet with riveted aventail, 2 mm steelGjermundbu helmet with riveted aventail, 2 mm steel
Gjermundbu helmet with riveted aventail, steel 2 mm
- ready for battle

€188.69

€235.86

-20%

Elmo Crusaders ready for battle

Crusader helmet, 2 mm steel
- ready for battle
A replica ready for the battle of a helmet of the late 12th century worn by the knights of the Christian orders, such as the Hospitalries and Templars during the Crusades. It's a flat top helmet with a large front plate. The helmet is made of steel 2 mm sheets that are all connected and fixed by rivets. A comfortable, adjustable and padded padded lining is riveted into the helmet, as well as a leather strap with brass buckle.
This helmet is available in sizes M and L.

size
max. head circumference
Internal distance back to forehead approx.
Internal distance ear to ear approx.
Weight approx.

m
61 cm
22 cm
19 cm
3.3 kg

I
64 cm
23 cm

20 cm3.5 kg

€172.20

€215.25

-20%

Churburg Armor - Polished

Churburg Armor - Polished

This breastplate or battleship is modeled after pieces from churburg's collection in South Tyrol, whose pieces have been produced over the centuries by gunsmiths from Milan or Innsbruck, whose style is reflected here.

The front covers the chest, the space around the neck and arms allows a padded underwear like a Gambeson and other pieces of armor to be easily combined. The lower part involves the stomach and kidneys. With crossed straps behind the back and attached to the armor itself, everything is kept in position.

Details:

- Material: 1 mm steel

- Weight: approx. 3 kg

- Color/s: polished steel

€248.71

€310.89

-20%

Warrior shoulder plates (steel), pair

Warrior shoulder plates are made of 1 mm thick steel with rivets and without sharp edges to make them safe for LARP weapons..

€110.66

€138.32

-20%

Italian Bascinet, Barbute helmet, about 1470, 2 mm steel

Italian Bascinet, Barbute helmet, about 1470, 2 mm steel- ready for battle.

€158.08

€197.60

-20%

Upper Leg Protection, Steel

Upper Leg Protection (or tassets) Warrior helps protect the thighs and groin from sword blows and other impacts. Two sets of steel plates protect the hips and the outside of the thighs, a third set of smaller plates protects the groin and parts of the inner thighs. They are made of 1 mm thick steel without sharp edges and are therefore safe for LARP weapons . It is worn with a leather belt and additionally on the shoulders with belt suspenders. As this upper leg protection is neutral style, it will be a great addition to any LARP character armor.

€231.85

€289.81

-20%

T-shaped Barbute, 15º C., Medieval Helmet, Ready for Battle, 2mm Steel

Italian Barbute T-shaped, 15th century, battle-ready helmet, steel2 mm Details:- Suitable for reconstitution ofcombat - Material: 2mm steel (14 gauge), leather inlay, leather chin strap with aged brass buckle- Suitable for head circumference up to approx. 65 cm- Long distance (from back to front): approx. 22 cm- Short distance (ear to ear): approx. 19 cm- Height: approx. 26 cm- T-aperture dimension: eye area approx. 11 x 3 cm / mouth area approx. 9 x 3.5 cm (5.5 cm at the bottom edge)- Weight: approx. 2.8 kgLooking for a high-quality yet affordable medieval helmet suitable for combat reenactment? Well, it looks like your search is over! This rugged handmade helmet, based on a historic piece, offers great value for money. Plus, its authentic appearance and elegant simplicity are sure to turn heads!The barbute or barbuta, a specialized form of the celata or sallet, is derived from the earlier bascinet. This helmet without a visor of Italian origin was most popular in northern Italy in the 14th and 15th centuries, but it was also used throughout Europe.The barbute offered good protection for the head and face without excessively restricting vision and breathing. The rounded bowl of the helmet covered the head and neck almost completely, and often featured an upper crest or low crest that ran from the forehead to the nape of the neck. A defining feature of this type of helmet was the forward extension from the sides towards the front, which protected the sides of the wearer's face below the eyes. Another main distinguishing feature was the T- or Y-shaped opening of the face.The authentic, battle-ready SPQR reconstruction we offer here is based on the helmet of the famous Milanese Avant armour that is on display for people to admire at the Kelvingrove Art Gallery and Museum in Glasgow, Scotland. This late medieval armor, one of the oldest almost fully preserved armor of its kind in Europe, is dated to about 1440-1445. It was created in Milan (one of the most productive cities for the manufacture of armor and weapons of the European Middle Ages) for a member of the noble von Matsch family of the Castle of Churburg (Castel Chur) in South Tyrol, Italy. Our barbute with T-shaped opening and center ridge from front to back is handmade with approx. 2 mm steel. The opening and bottom edge are reinforced and the interior is blackened for better corrosion resistance. The riveted suspension lining made of leather ensures a comfortable fit and good wearing comfort, and the sturdy, adjustable chin strap with historic brass buckle provides a secure hold.Suitable for combat reenactment, LARP, stage or TV/film, this slim, fully wearable knight helmet is best suited for late medieval scenarios and ideal for completing a European warrior's armour. Of course, our T-faced barbute not only impresses with its combination of authenticity, safety and comfort, but is also a real eye-catcher that will make a great decorative addition to any helmet collector's treasure chamber.Top-notch quality at an unbeatable price – Do you want to treat yourself to a good-value piece of history that will add the finishing touch to your medieval knight's armor without breaking your budget? So take the chance and order this top-class helmet today!The steel used here is not rust-proof and may have slight surface stains in places. We recommend that you regularly maintain helmets, for example by using Ballistol Universal Oil, which is ideal for steel care. Specifications may vary slightly from part to part.

€167.28

€209.10

-20%

Viking Warrior Armor ideal for LARP

First-scale armor dates back to antiquity (long before the Vikings existed). And not just through time, but scale armor protected soldiers and warriors from all over the world. Whether byzantine or Viking armor, the overlapping scale construction has been favored by all kinds of powerful warriors!
Our reproduction is HANDMADE from heavy-duty 20 gauge MILD STEEL scales riveted into a sturdy leather back, making it ideal for VIKING COSPLAY AND LARP. It fully covers the trunk, remaining quite light. It is available in three sizes: medium (chest 94-104 cm), large (chest 105-115 cm) and extra large (chest 116-126 cm) (Measure WITH gambeson) and is highly adjustable thanks to its multiple genuine leather straps.

€314.69

€393.37

-20%

Medieval Hood and Long Sleeve Shirt, Ass, DI 10mm, Zinc plated

Whether it's the legendary Viking Wars or even the so-called "decisive" Battle of Hastings, knights and warriors have always needed maximum protection, and when you reenact those wars, you have to make sure you need it too! This set of mesh quota and V-shaped mesh quota will make you do just that. The cap can also be the perfect protection under your favorite hat or even as the only protection for the head.
This set is handmade with 16-gauge mild steel rings, each measuring approximately 10 mm in diameter. Its background feature makes it accessible and therefore popular at LARP, Renaissance Faire and other medieval events. The shirt is available in two sizes: medium and large. The lid is available in a size that fits more.

€115.72

€144.65

Armor

Subcategories

Folow Us

Manager

Amanda Brown

Online from 09:00 - 19:00 GMT+1