Active filters

  • Categories: Elmos Templarios clear
  • Categories: Key Doors and Imanes clear
  • Categories: Mesh Quota clear
Templar Keychain - 1
  • -20%
Templar Keychain
Keychain Templar Knight. Made in Zamak. Size: 4 cms.
€3.69
€4.61
RRZ Mesh dimension, mesh dimension, riveted, zincada - 1
  • -20%
RRZ Mesh dimension, mesh dimension, riveted, zincada
RRZ Mesh dimension, mesh dimension, riveted, zincada- Battle-Ready -This high quality handmade knit quota is called the Mesh Dimension, which means it has long sleeves and reaches the knees. Such a powerful chain armor covers most of the body.
€421.55
€526.93
RRZ9 Knitted quota shirt, Haubergeon, riveted, zincada - 1
  • -20%
RRZ9 Knitted quota shirt, Haubergeon, riveted, zincada
RRZ9 Knitted quota shirt, Haubergeon, riveted, zincadaBattle-readyThe haubergeon (= small Hauberk) is a mid-sleeved knitted shirt that reaches up to the thighs.The RRZ mesh quotait is manufactured with round rings of galvanized steel. Each ring was riveted by hands with round rivets. It is woven in pattern 4 in 1.Galvanization offers - in contrast to the natural and smooth mesh finish - a fairly good protection against corrosion.
€284.54
€355.68
Poleyn with thigh protection (pair) - 1
  • -20%
Poleyn with thigh protection (pair)
Last items in stock
Usable, fully articulated reconstruction of leg armor from the late Middle Ages.The set of leg harnesses consists of a pair of pieces, which feature connected grevas, fan pollen and cuissas, which offer protection for the thigh, leg and knee.It is handmade in 1.8 mm soft steel and suitable for combat and staging.The leg protection comes complete with four leather straps and buckles too, to attach the plates to the lower limbs for ease of use.Suitable for combat, reenactment, LARP and costumes. They are offered as a combined pair.
€196.80
€246.00
Bishop's robe with leather straps and buckles - 1
  • -20%
Bishop's robe with leather straps and buckles
The bishop's robe is a mesh-dimension necklace that covers the neck, shoulders, and upper chest and back. It was particularly favoured by the Landknechte Germans (mercenary soldiers) in the fifteenth and sixteenth centuries and is woven in a similar way to a knitted cap. The shape of this piece of chain armor explains its name, as it resembled too much the very wide collar of a bishop's robe.
€105.39
€131.73
Elmo Sugarloaf Crusader Knight Calibre 16 - 5
  • -20%
Elmo Sugarloaf Crusader Knight Calibre 16
This helmet is a replica of the original "Wencelas", dating from the 10th century.It is made of steel with 2mm thickness and reinforced in the nasal.Includes adjustment straps, leather.Sizes available:
M: up to 62 cm head circumference
Weight: from 2.15 to 2.55kg
€126.46
€158.08
English Civil War lobster pot helmet, 18th century caliber - 6
  • -20%
English Civil War lobster pot helmet, 18th century caliber
A fierce iron side mounted, holding his heavy cavalry sword or a pistol while carrying with this legendary lobster pot helmet; a vision you'd like to be a part of too! And what has been our inspiration for this simplified version of the most iconic helmet of the English Civil War!
Handmade soft steel of 18 caliber, this helmet is lightweight but sturdy. It is lined with genuine leather that acts as a damper and provides a comfortable fit at the same time. This helmet comes with significant face and neck protection offered by the three protective bars and cheek plates, respectively. Its circumference is approx. 66 cm making it ideal for almost all head sizes.
The famous Ironsides were the elite knights of the parliamentary cavalry under Oliver Cromwell during the 17th-century English Civil War.
€178.10
€222.63
Cuirassier gauntlets of the 16th caliber from the 16th to 17th centuries - 1
  • -20%
Cuirassier gauntlets of the 16th caliber from the 16th to 17th centuries
The battle is about to begin. Your squad is called to the front, and as you calmly take your place on the front line, you know, as you hold your deadly sword, that your old gauntlets won't let any impact hit your hands.
Their sleek appearance and mobility have made them one of our most popular medieval armor pieces for years, highly appreciated in LARP and reenactments. Not surprisingly, they are based on the cushier gauntlets of the 16th to 17th centuries, known to provide freedom of movement in combat.
€252.93
€316.16
Legendary steel gladiator helmet "Maximus" with leather lining - 3
  • -20%
Legendary steel gladiator helmet "Maximus" with leather lining
This helmet is HANDMADE in 18 gauge MILD STEEL, lined with a genuine leather lining. The height of this helmet is about 29 cm. The ocular clefts measure about (7×3.5) cm. It is conveniently sized with an inner circumference of approximately 68 cm (without lining) to fit almost all head sizes (65 cm with lining). The internal width at the level of the ears is about 21 cm and the internal depth from front to back at eye level measures about 24 cm.
Note: This product is carefully coated with a layer of oil when packaged that acts as a temporary (protective) layer against corrosion (rust), which can be easily removed with any oil remover or even with a dry cloth. All measurements are approximate.
€147.54
€184.43
Crusader Knight Pot Helm Battle Ready with 16 caliber brass cross - 1
  • -20%
Crusader Knight Pot Helm Battle Ready with 16 caliber brass cross
This helmet is HANDMADE in 16 gauge MILD STEEL. The adjustable padded lining in high quality canvas and proper padding ensure comfort and optimal alignment with the slit of the eye. An approximate internal circumference of 68 cm (without lining) provides a size that fits most (65 cm with lining). The height is about 36 cm and the base is about (27×21) cm. The internal width at the level of the ears is about 21 cm and the internal depth from front to back at eye level measures about 26.5 cm. The ocular clefts measure about (15×1.5) cm. It weighs about 4 kg and 150 grams with its lining. A sturdy chin strap with brass buckle ensures that your helmet stays in place during battles. Note: This product is carefully coated with a layer of oil when packaged that acts as a temporary (protective) layer against corrosion (rust),
€158.08
€197.60
Tenth century Viking Varangian Slavic Rus Gnezdovo helmet with 16th gauge Camal tip mesh chain - 4
  • -20%
Tenth century Viking Varangian Slavic Rus Gnezdovo helmet with 16th gauge Camal tip mesh chain
Our reproduction is handmade in 16-gauge tempered steel, lined with a comfortable and secure leather lining and an aventail chain mail. An approximate circumference of 68 cm (without lining) allows it to fit in almost all head sizes (65 cm with lining). A leather strap and brass buckle clasp keep you safe in every battle. It has a height of about 25.5 cm and a base of (24.5×21) cm. It weighs about 4 kg and 52 grams.Note: This product is carefully coated with a layer of oil when packaged that acts as a temporary (protective) layer against corrosion (rust), which can be easily cleaned with any degreasing product or even with a dry cloth.
€199.73
€249.67
Medieval gloves of the fourteenth-century baron with hourglass of 16 gauge - 1
  • -20%
Medieval gloves of the fourteenth-century baron with hourglass of 16 gauge
Looking for some historically-inspired gauntlets that can enhance your fourteenth-century reenactment costumes? Then these hourglass gauntlets, with their elegant shape and historical motifs, are undoubtedly the most suitable option for you. Among all our gauntlets, they are one of those pieces of armor that offer a wide range of motion and maximum mobility to the wrist, thanks to the wide cuffs typical of the time. It is not surprising that they were directly inspired by an original from the second half of the fourteenth century, currently exhibited in Florence (Italy).
Meticulously handmade in 16-gauge mild steel, they are sturdy and will last many battles. They fasten with sturdy leather straps and solid brass buckles. For added comfort and grip, they are supplied with suede gloves. Its total length is approximately 27 cm (from the tip of the middle finger to the lowest tip of the gauntlet). It comes in one size fits all.
€189.70
€237.12
Late medieval Gothic knighthood gauntlets caliber 16 - 2
  • -20%
Late medieval Gothic knighthood gauntlets caliber 16
His enemies continue to wonder about his inability to stop him from quick attacks with his sword. And why not? After all, you donned your elegant gothic gauntlets! They are not only designed in an ornate manner, but are also made to resist any movement while you defeat your opponents.
Meticulously handmade in durable 16-gauge mild steel, they are robust and will last battle after battle. They fasten with sturdy leather straps and solid brass buckles. For added comfort and grip, they are supplied with suede gloves. Its total length, when placed in a straight line, is approx. 20 inches. Note: These gauntlets are large in size.
€168.62
€210.77
Chainstay Hood with Triangular Tail, BTW, ID8mm, Natural Finish - 1
  • -20%
Chainmail Hood with Triangular Tail, BTW, ID8mm, Natural Finish
Chainmail with triangular tail, BTW, ID8mm, natural finish- Battle-Ready -The chainmail cap that covers the shoulders has an authentic square face opening and a triangular tail fitted with a leather tie and lined with leather.These headdresses were particularly popular in the High Middle Ages, for example among the Normans and the Crusaders.The type of chainmail BTW: This particular mesh is made up of top rings made of high-quality spring steel. Considering its excellent value at a fair price, it is perfectly suited for inexperienced reenactors who bet on good protection and solid quality. The plot is 4 in 1. This type is called BTW (Polyurethane Wire). While the natural finish allows for rust to develop, it also gives the fabric a genuine look.This medieval cap is suitable for combat reenactment, LARP, stage or TV/film, and ideal for completing the armor of a crusader or Knight Templar.We recommend wearing a padded cap under the hood of the chain.Details:- Material: Spring Steel- Finish: natural (lightly oiled)- Inner ring diameter: approx. 8 mm- Ring thickness: approx. 1.6 mm- Weight: approx. 3.1 kgSpecifications may vary slightly from part to part.The steel used here is not rust-proof and may have slight surface stains in places. We recommend that you regularly maintain chainmail/chain armor, for example using Ballistol Universal Oil, which is ideal for taking care of steel.
€80.29
€100.37
Polished, riveted and stitched handles
  • -20%
Polished, riveted and stitched handles
Handles, PairThis pair of late medieval grips is hand-tapped in 1.3 mm steel. It's loosely riveted, so almost all parts are well-articulated.A soft inner leather glove is sewn to the steel gauntlet.Details:- Glove size: approx. 9-10- Material: approx. 1.3 mm steel- Finish: polished- Weight: approx. 2.1 kg (pair)
€196.80
€246.00
Combat gauntlets, polished, riveted and sewn
  • -20%
Combat gauntlets, polished, riveted and sewn
Combat gauntlets, polished, riveted and sewnMade of 1.3 mm steel, with almost all moving parts. Soft inner leather glove.Robust, sewn and riveted. Glove Size: Approx. 9-10
€196.80
€246.00
Tenth Century Viking Varangian Rus Slavic Gnezdovo Helmet Calibre 16 - 5
  • -20%
Tenth Century Viking Varangian Rus Slavic Gnezdovo Helmet 16th Gauge
Our reproduction is directly inspired by an original found in a tenth-century Slavic-Varghian settlement called Gnezdovo or Gnyozdovo, near Smolensk, in present-day Russia. Many typical Scandinavian objects have been found simultaneously with this helmet, making it a good choice for those who want to recreate a Viking/Varangian/Russian/East Slavic character. However, this helmet may not be suitable if it depicts a western Viking invading England.
This helmet is HANDMADE from 1.6mm mild steel (16 gauge) and lined with an adjustable genuine leather lining. From it hangs a riveted chain mail that protects the lower part of the face. An approximate circumference of 68 cm (unlined) (65 cm with liner) allows it to fit most head circumferences from about 58 cm to 61-62 cm, depending on the shape of the user's head. (If you want to wear an extra padded hat, measure the circumference of your head while wearing it.) A genuine leather chin strap, with solid brass buckle, keeps it in place battle after battle. It has a height of about 25.5 cm (without an aventail), the inner width at the level of the ears is about 21 cm, and the inner depth from front to back at eye level is about 24.5 cm. It weighs about 4 kg and 12 grams.
Note: This product is carefully coated with a layer of oil when packaged that acts as a temporary (protective) layer against corrosion (rust), which can be easily cleaned with any degreasing product or even with a dry cloth.
 
€199.73
€249.67