Active filters

  • Categories: Elmos Templarios clear
  • Categories: Templarios Swords clear
  • -20%
Crosssword with sheath, functional
Medieval sword a hand with disc button. Hand forged in EN-45 steel with heat treatment. The blade is threaded to the button. It has a hardness of 48-50 HRC. Leather strap covered leather. The tip of the blade is rounded and the edges are blunt. Includes leather hem coated in leather.
€191.88
€239.85
  • -20%
Helm Crusaders
Large medieval helmet with brass accessories and leather lining,14º C., 1.6 mm steel
€157.44
€196.80
  • -20%
Elmo Crusaders ready for battle
Crusader helmet, 2 mm steel
- ready for battle
A replica ready for the battle of a helmet of the late 12th century worn by the knights of the Christian orders, such as the Hospitalries and Templars during the Crusades. It's a flat top helmet with a large front plate. The helmet is made of steel 2 mm sheets that are all connected and fixed by rivets. A comfortable, adjustable and padded padded lining is riveted into the helmet, as well as a leather strap with brass buckle.
This helmet is available in sizes M and L.



size
max. head circumference
Internal distance back to forehead approx.
Internal distance ear to ear approx.
Weight approx.


m
61 cm
22 cm
19 cm
3.3 kg


I
64 cm
23 cm




20 cm3.5 kg
€172.20
€215.25
  • -20%
Functional Crossed Accolade Sword with Sheath
Knight Templar functional hand-forged sword with 1065 carbon steel blade looking for optimum balance, speed and durability.

It includes a sturdy leather covered wooden hem and a vintage ribbon with solid metallic hardware.
The button carries a very detailed Templar coin on each side with a Latin inscription and the symbols representing the Order of the Temple.
The handle is coated in red leather, surrounded by a metallic thread.
€312.91
€391.14
  • -20%
Great King's Helmet with crown, 1.6 mm steel
The so-called Great Helmet (also called a large helmet, large heaume, pot helmet, bucket helmet or barrel helmet) was often worn on a smaller and lighter helmet (e.g. a cervelliere/secret helmet) and was widespread throughout Central Europe in the Middle Ages. Numerous historical illustrations, miniatures and finds from Germany, Flanders, England, Italy, Switzerland, Austria, etc. testify to the popularity of this particular type of helmet at the time. These helmets emerged during the Crusades in the late 12th/ early 13th century. and were commonly used by knights until the mid-14th century.
€168.62
€210.77
  • -20%
Sword Templaria Damascus
Damascene Extraordinary da Damascene with open blade and 48 inches. Between 1108 and 1118, three religious-military orders were created to help and protect pilgrims who were going to the holy places. The Order of the Poor Knights of Christ, later known as the Order of the Temple, the Order of Hospitals of St. John of Jerusalem and the Order of teutonic Hospital brothers.
Pope Innocent II recognized the order of the Temple in the year 1139. The seal of the Templars, insignia of the order;  Two riders mounted on the same horse represent the dual vocation of the order, religious and military. With a Latin inscription that says sigilum militum Xpisti (Seal of the militia of Christ).
€305.04
€381.30
  • -20%
Elmo Sugarloaf Crusader Knight Calibre 16
This helmet is a replica of the original "Wencelas", dating from the 10th century.It is made of steel with 2mm thickness and reinforced in the nasal.Includes adjustment straps, leather.Sizes available:
M: up to 62 cm head circumference
Weight: from 2.15 to 2.55kg
€126.46
€158.08
  • -20%
English Civil War lobster pot helmet, 18th century caliber
A fierce iron side mounted, holding his heavy cavalry sword or a pistol while carrying with this legendary lobster pot helmet; a vision you'd like to be a part of too! And what has been our inspiration for this simplified version of the most iconic helmet of the English Civil War!
Handmade soft steel of 18 caliber, this helmet is lightweight but sturdy. It is lined with genuine leather that acts as a damper and provides a comfortable fit at the same time. This helmet comes with significant face and neck protection offered by the three protective bars and cheek plates, respectively. Its circumference is approx. 66 cm making it ideal for almost all head sizes.
The famous Ironsides were the elite knights of the parliamentary cavalry under Oliver Cromwell during the 17th-century English Civil War.
€178.10
€222.63
  • -20%
Legendary steel gladiator helmet "Maximus" with leather lining
This helmet is HANDMADE in 18 gauge MILD STEEL, lined with a genuine leather lining. The height of this helmet is about 29 cm. The ocular clefts measure about (7×3.5) cm. It is conveniently sized with an inner circumference of approximately 68 cm (without lining) to fit almost all head sizes (65 cm with lining). The internal width at the level of the ears is about 21 cm and the internal depth from front to back at eye level measures about 24 cm.
Note: This product is carefully coated with a layer of oil when packaged that acts as a temporary (protective) layer against corrosion (rust), which can be easily removed with any oil remover or even with a dry cloth. All measurements are approximate.
€147.54
€184.43
  • -20%
Silver Templar Sword - Blue Enamel
Templar sword, with carbon steel blade. A high quality sword.
The Order of the Poor Knights of Christ and the Temple of Solomon, also called the Order of the Temple and whose members are known as Knights Templar, was one of the most powerful Christian Military Orders of the Middle Ages.


With silver handle with contrasts in blue and blade with special engraving in deep black.
Total length: 118 cm
Blade length: 92.5 cm
Weight: 2.9 kg
€271.58
€339.48
  • -20%
Crusader Knight Pot Helm Battle Ready with 16 caliber brass cross
This helmet is HANDMADE in 16 gauge MILD STEEL. The adjustable padded lining in high quality canvas and proper padding ensure comfort and optimal alignment with the slit of the eye. An approximate internal circumference of 68 cm (without lining) provides a size that fits most (65 cm with lining). The height is about 36 cm and the base is about (27×21) cm. The internal width at the level of the ears is about 21 cm and the internal depth from front to back at eye level measures about 26.5 cm. The ocular clefts measure about (15×1.5) cm. It weighs about 4 kg and 150 grams with its lining. A sturdy chin strap with brass buckle ensures that your helmet stays in place during battles. Note: This product is carefully coated with a layer of oil when packaged that acts as a temporary (protective) layer against corrosion (rust),
€158.08
€197.60
  • -20%
Tenth century Viking Varangian Slavic Rus Gnezdovo helmet with 16th gauge Camal tip mesh chain
Our reproduction is handmade in 16-gauge tempered steel, lined with a comfortable and secure leather lining and an aventail chain mail. An approximate circumference of 68 cm (without lining) allows it to fit in almost all head sizes (65 cm with lining). A leather strap and brass buckle clasp keep you safe in every battle. It has a height of about 25.5 cm and a base of (24.5×21) cm. It weighs about 4 kg and 52 grams.Note: This product is carefully coated with a layer of oil when packaged that acts as a temporary (protective) layer against corrosion (rust), which can be easily cleaned with any degreasing product or even with a dry cloth.
€199.73
€249.67
  • -20%
Tenth Century Viking Varangian Rus Slavic Gnezdovo Helmet 16th Gauge
Our reproduction is directly inspired by an original found in a tenth-century Slavic-Varghian settlement called Gnezdovo or Gnyozdovo, near Smolensk, in present-day Russia. Many typical Scandinavian objects have been found simultaneously with this helmet, making it a good choice for those who want to recreate a Viking/Varangian/Russian/East Slavic character. However, this helmet may not be suitable if it depicts a western Viking invading England.
This helmet is HANDMADE from 1.6mm mild steel (16 gauge) and lined with an adjustable genuine leather lining. From it hangs a riveted chain mail that protects the lower part of the face. An approximate circumference of 68 cm (unlined) (65 cm with liner) allows it to fit most head circumferences from about 58 cm to 61-62 cm, depending on the shape of the user's head. (If you want to wear an extra padded hat, measure the circumference of your head while wearing it.) A genuine leather chin strap, with solid brass buckle, keeps it in place battle after battle. It has a height of about 25.5 cm (without an aventail), the inner width at the level of the ears is about 21 cm, and the inner depth from front to back at eye level is about 24.5 cm. It weighs about 4 kg and 12 grams.
Note: This product is carefully coated with a layer of oil when packaged that acts as a temporary (protective) layer against corrosion (rust), which can be easily cleaned with any degreasing product or even with a dry cloth.
 
€199.73
€249.67