Beginning
- Productsaddremove
Filter By
Categories
Categories
Price
Price
Size
Size
Trending
€111.90
€67.14
 (280 × 350 px) (1)_2.png)
.png)
Special Products
€111.90
€67.14
Armor
Subcategories
There are 135 products.
Active filters
- Categories: Armor parts clear
Steel greaves Medieval Fantasy Plain Greaves Armor LARP caliber 18
Looking for a beautiful armor of plates to protect your shins or simply enhance your LARP costume?
Look no further! These greascans may be exactly what you need!
Handmade in soft 18 gauge steel, these greams are sturdy but lightweight, ideal for amazing LARP and Cosplay clothing. When used, you hardly notice them, as they are firmly fastened by two sturdy leather straps on the back.
ONE SIZE
Look no further! These greascans may be exactly what you need!
Handmade in soft 18 gauge steel, these greams are sturdy but lightweight, ideal for amazing LARP and Cosplay clothing. When used, you hardly notice them, as they are firmly fastened by two sturdy leather straps on the back.
ONE SIZE
€73.90
Gothic clamps, pair, steel 1.2 mm
This wearable, fully articulated reconstruction of a late medieval plate armor for the arms is made of 1.2mm (18 gauge) steel and blackened on the inside for better corrosion resistance. It is intended to protect the forearms, elbows and upper arms, and features the typical multilayered appearance of Gothic plate armor from the late Middle Ages (19th century). XV/XVI).Arm protection consists of a couter or cowter (also known as an elbow pad), a vambrace or lower cannon, and a rerebrrace or upper cannon. For proper freedom of movement, all parts are connected to each other by sliding plates or hinged plates on sturdy steel rivets.At the rear, each arm is equipped with three riveted, adjustable arms of approx. 2mm thick leather straps with brass buckles for a comfortable, personalized fit.The edges are adorned with grooves and small steel rivets, and the elbows feature flower-shaped, slightly concave steel rondels that are riveted on the sides (see also our besagews – product no. 1016634200).This articulated arm harness is ideal for medieval and Renaissance environments. Equally suitable for the depiction of a wide range of historical figures and fiction/fantasy characters, it will seamlessly make your transformation into a proud and noble knight or warrior, whether used for medieval reenactment, LARP, stage, TV/film, fantasy or cosplay.Arm guards are sold in pairs.
€160.00
Gorget Gothic, Steel 1.2 mm
This wearable reconstruction of a late medieval plate armor for the throat and neck (or rather, for the upper torso) is made of 1.2 mm (18 gauge) steel. The gorjal has the multilayered appearance typical of the Gothic plate armor of the late Middle Ages (16th century). XV/XVI). It consists of two parts – a chest piece and a back piece, which are hooked on one side and closed with a strap and buckle on the other side. The riveted, approx. The 2mm thick leather strap is adjustable to ensure a comfortable, personalized fit for optimal protection.The rounded edges of the neck plates are adorned with small steel rivets and grooves at the neckline. The back is blacked out for better corrosion resistance.This collar is ideal for late medieval and Renaissance environments. Equally suitable for the depiction of a wide range of historical figures and fiction/fantasy characters, it will seamlessly make your transformation into a proud and noble knight or warrior, whether used for medieval reenactment, LARP, stage, TV/film, fantasy or cosplay.Details:- Material: 1.2 mm (18 ga) steel plate, brown leather straps, aged brass buckle-Max. Width (at shoulder height): approx. 31 cm- Neck opening (diameter): approx. 16.5 cm- Weight: approx. 790 gSpecifications may vary slightly from part to part.Delivery includes only the gorget! The other armor pieces illustrated above are available separately in our online shop. Observation:To make sure this armor is right for you, remember to take your measurements on your Gaveson and/or any piece of clothing or chainmail you plan to wear underneath!The steel used here is not rust-proof and may have slight surface stains in places. We recommend that you maintain the plate shield regularly, for example using Ballistol Universal Oil, which is ideal for caring for steel.
€50.00
Late medieval armour set with 16 caliber arm harnesses and arm harnesses
Looking for a suitable armor for your favorite medieval character?
Our late medieval armor with asymmetrical shoulder pads is probably exactly what you should wear to your next event! These are well designed and HANDMADE in 16 gauge MILD STEEL, making them lightweight and perfect for LARP or medieval fairs.
Easy to attach to breastplate or rufous.
Our late medieval armor with asymmetrical shoulder pads is probably exactly what you should wear to your next event! These are well designed and HANDMADE in 16 gauge MILD STEEL, making them lightweight and perfect for LARP or medieval fairs.
Easy to attach to breastplate or rufous.
€214.20
Medieval fantasy steel breastplate with tassels
Last items in stock
Smooth pectoral for unengraving armor. It's not functional for people. The pectoral is part of the medieval armor and its mission is essential as it protects the fighter's vault.
€299.88
Viking warrior scale pectoral ideal for LARP
First-scale armor dates back to ancient times (long before the Vikings even existed). And not just over time, but armor at scale has protected soldiers and warriors around the world. Whether it was Byzantine or Viking armor, the overlapping scale construction was preferred by all kinds of such powerful warriors!
Our reproduction is HANDMADE from robust 20-gauge MILIMIT STEEL scales riveted into a sturdy leather holder, making it ideal for VIKING COSPLAY AND LARP. It completely covers the trunk, remaining quite light. It is available in three sizes: medium (chest 94-104 cm), large (chest 105-115 cm) and extra large (chest 116-126 cm) (measured WITH gambeson) and is highly adjustable thanks to its multiple genuine leather handles.
Our reproduction is HANDMADE from robust 20-gauge MILIMIT STEEL scales riveted into a sturdy leather holder, making it ideal for VIKING COSPLAY AND LARP. It completely covers the trunk, remaining quite light. It is available in three sizes: medium (chest 94-104 cm), large (chest 105-115 cm) and extra large (chest 116-126 cm) (measured WITH gambeson) and is highly adjustable thanks to its multiple genuine leather handles.
€342.72
Viking armor of lamellar scales with Visby plates
Last items in stock
A Viking warrior, enjoying his toasts at the banquet table, dressed in his magnificent lamellar armor, celebrates his victory. After all, who could defeat him when he donned this impassable and well-crafted Viking lamellar armor with carefully superimposed Visby steel plates! One of the most attractive features of this lamellar armor is the supply of six sheets of leather on the shoulders (3 in each) to firmly hold your shoulder pads (lamellar shoulder pads are available separately).
This artwork is handmade from Visby Gauge 20 MILIMIT STEEL plates, mounted with genuine leather ropes. The entire structure of this armor is fixed on a sturdy leather support, making it strong and durable. It is available in three sizes: medium (chest 94-104 cm), large (chest 105-115 cm) and extra large (chest 116-126 cm) (measured WITH gambeson) and is highly adjustable thanks to its multiple real leather shoelaces.
This artwork is handmade from Visby Gauge 20 MILIMIT STEEL plates, mounted with genuine leather ropes. The entire structure of this armor is fixed on a sturdy leather support, making it strong and durable. It is available in three sizes: medium (chest 94-104 cm), large (chest 105-115 cm) and extra large (chest 116-126 cm) (measured WITH gambeson) and is highly adjustable thanks to its multiple real leather shoelaces.
€428.40
Viking lamellar armor for shoulder and body protection
Last items in stock
His round Viking shield won't be the only thing protecting him. This amazing lamellar armor will also do! It is handmade with hundreds of blackened steel plates superimposed with pure brass plates carefully arranged in a row in the center. And the integrated shoulder armor is lined with leather to protect your shoulders from friction. Try it and you'll know right away why it was so popular back then.
The 20-gauge plates are glued with thick leather lining and fitted into a sturdy real leather armor frame. When placed, it ties and fastens to the back with matching leather laces and leather flaps. It is available in three sizes: medium (chest up to 110 cm), large (chest up to 120 cm) and extra large (chest up to 135 cm) (measure COM gambeson) and is highly adjustable thanks to its multiple genuine leather straps.
Note: This product is carefully coated with a layer of oil when packaged that acts as a temporary (protective) layer against corrosion (rust), which can be easily cleaned with any degreasing product or even with a dry cloth
The 20-gauge plates are glued with thick leather lining and fitted into a sturdy real leather armor frame. When placed, it ties and fastens to the back with matching leather laces and leather flaps. It is available in three sizes: medium (chest up to 110 cm), large (chest up to 120 cm) and extra large (chest up to 135 cm) (measure COM gambeson) and is highly adjustable thanks to its multiple genuine leather straps.
Note: This product is carefully coated with a layer of oil when packaged that acts as a temporary (protective) layer against corrosion (rust), which can be easily cleaned with any degreasing product or even with a dry cloth
€567.63
Fifteenth-century medieval Leeds Brigandine
Last items in stock
Brigandina was the most common form of protection among commoners and nobles. On a fifteenth-century battlefield you can find all styles of bandits, from the most common archers to the most expensive and luxurious of the high-ranking nobles. A versatile form of protection that offers excellent mobility, a historic brigandine is characterized by its ingenious construction. It consisted of hundreds of small plates under a sturdy tarp or leather cover that gave it an iconic look, with every row of plates appearing elegantly on the exterior. Not only did it look very distinctive, but it was extremely comfortable, precisely because of the excellent mobility it allowed. All these parameters sustained the advantage of being able to be used for many hours, something that all the re-enactors respected and enjoyed for hours on the battlefields and long events. A brigandine was also quite effective in offering excellent protection, forming a perfect balance between having almost no movement impediment and retaining a significant amount of protection. It was usually worn by a private soldier, with chain mail underneath or simply a pair of chainmail sleeves, a kilt and a limited amount of armor (all available separately). Knights and soldiers wore it along with armor for the limbs and the rest of the body. So whether you want to recreate a fifteenth-century infantryman or a twenty-first-century soldier, MAKE SURE OUR BRIGANDINA LEEDS IS THE BEST POSSIBLE CHOICE! Directly inspired by an original found today in the royal arsenals of Leeds, England, you can be sure that it improves your mobility and offers important protection as you fight event after event, battle after battle, reenactment after reenactment.
€759.36
Fourteenth-century Brigandina of Kusnacht
Last items in stock
This gorgeous fourteenth-century bandit is directly inspired by the famous Kusnacht bandit found in a castle in Switzerland. He is one of the best-known bandits of the fourteenth century and also one of the most popular of today, both in medieval tournaments and battlefields and in Behourd and jousting.
And there's no doubt why, because the intelligent design of the original that we directly emulated offers an extremely high level of protection and maximum mobility. All the plates overlap, allowing the brigandine to spread any impact on the fighter's torso efficiently, as each plate hit by an impact is actually superimposed on other plates, actually allowing the diffusion of any blow, and allows for incredible mobility at the same time; Even kicking this type of brigandine high is totally possible! You really appreciate the great range of motion that overlapping chest plates allow. Even using a long sword or rod gun will be a real pleasure with this type of equipment
And there's no doubt why, because the intelligent design of the original that we directly emulated offers an extremely high level of protection and maximum mobility. All the plates overlap, allowing the brigandine to spread any impact on the fighter's torso efficiently, as each plate hit by an impact is actually superimposed on other plates, actually allowing the diffusion of any blow, and allows for incredible mobility at the same time; Even kicking this type of brigandine high is totally possible! You really appreciate the great range of motion that overlapping chest plates allow. Even using a long sword or rod gun will be a real pleasure with this type of equipment
€471.24
15º C. Arm Protection, Ready for Battle, Pair
Set Rebrace and Vambrace of the fifteenth centuryBattle-ready and fully mobile reconstruction of a late medieval rebrace and fifteenth-century vambrace armor.This plate armor consists of two parts: upper (rebrace) and lower (vambrace). In addition, there are three riveted leather straps with brass buckles, with which the armor can be adjusted and fixed on the arm. It can also be attached to shoulder pads or to a gambeson using leather straps.
€192.78
Steel arm armor, Pair
Full arm armor, pairWearable and articulated reconstruction of the arm armor of the late Middle Ages with shoulder pads, rebraces, cowters and armbands.In the shoulder area, the shoulder pads were tied to the gambeson or connected to other plate armor with leather straps. That's why a buckle was riveted at the shoulder pad.
€278.46
Medieval chains of the fifteenth century with real leather cords caliber 18
Our classic Jack Chains are hand forged in 18-gauge steel and are perfect for light and historical weapon protection. Their unique design and pattern make them ideal for reenactment and LARP.
Made of gauge 18 steel, they are lightweight and robust, offering an interesting combination of mobility and reliability.
The two shells fit perfectly on the shoulder and elbow for a more comfortable experience when dressed. To attach them to your arm, we provide a pair of authentic leather cords.
Its total length is approx. 61cm; each shell is approx. 13 cm wide.
Made of gauge 18 steel, they are lightweight and robust, offering an interesting combination of mobility and reliability.
The two shells fit perfectly on the shoulder and elbow for a more comfortable experience when dressed. To attach them to your arm, we provide a pair of authentic leather cords.
Its total length is approx. 61cm; each shell is approx. 13 cm wide.
€73.90
Foot armor, 18 mm
For any heroic mounted knight, the sabatons (armor for the feet) used to be mandatory. Our medieval sabatons, when tied over your shoes, keep your feet protected during your skirmishes!
With 18 gauge soft steel plates (or lames) riveted together (with 16 mm rivets) in a cleverly articulated manner, these sabatons allow efficient mobility.
They secure with a sturdy genuine leather strap (3.5 mm thick) and a beautiful iron buckle for a comfortable fit.
The historically inspired design of the conical tips makes them create perfect for historically re-enacting a late medieval knight character.
With 18 gauge soft steel plates (or lames) riveted together (with 16 mm rivets) in a cleverly articulated manner, these sabatons allow efficient mobility.
They secure with a sturdy genuine leather strap (3.5 mm thick) and a beautiful iron buckle for a comfortable fit.
The historically inspired design of the conical tips makes them create perfect for historically re-enacting a late medieval knight character.
€106.03
Poleyns steel knee armor padded late medieval knight gauge 16
Keeping the knee protected and still providing efficient mobility was difficult in the early Middle Ages. It was only at the end of the medieval period that the robust poleyns could easily attach themselves to their armor!
This pair of poleyns is handmade 16 gauge tough soft steel; it has comfortable and safe padding inside. They attach themselves to sturdy genuine leather straps (3.5 mm thick) and sturdy iron buckles for a comfortable fit. The historically inspired wings also protects the side of the knee,
ONE SIZE
This pair of poleyns is handmade 16 gauge tough soft steel; it has comfortable and safe padding inside. They attach themselves to sturdy genuine leather straps (3.5 mm thick) and sturdy iron buckles for a comfortable fit. The historically inspired wings also protects the side of the knee,
ONE SIZE
€63.19
Knight Poleyns suede-lined knee pads from the 13th century to the 14 gauge 16
Our 13th to 14th century poleynes effortlessly accentuate your medieval armor, perfect for knee protection on the battlefield!
This set of medieval poleyns is meticulously handmade in sturdy soft steel of 16 caliber (also available in soft steel of 18 caliber). The back of the poleyns knees is covered with black suede, riveted to the armor using 9 rivets at the top and bottom edges, which ensures greater comfort and protection. The handles are made of approx. 3 mm thick bovine leather can be adjusted using sturdy iron buckles.
This set of medieval poleyns is meticulously handmade in sturdy soft steel of 16 caliber (also available in soft steel of 18 caliber). The back of the poleyns knees is covered with black suede, riveted to the armor using 9 rivets at the top and bottom edges, which ensures greater comfort and protection. The handles are made of approx. 3 mm thick bovine leather can be adjusted using sturdy iron buckles.
€63.19
Medieval 16th century Medieval French steel leg armor
Re-enacting the 100-year war or the legendary Battle of Agincourt? Our perfectly hand-made French leg armor would surely complete your legendary armor!
These are meticulously handmade from sturdy soft steel of 16 caliber and can be fastened perfectly to your legs with a set of genuine legitimate leather straps.
To create these beautiful leg armor, we took inspiration directly from an existing pair of legs belonging to the young Charles VI of France, preciously preserved in the French city of Chartres and dated from about 1380-90.
Its form of historical inspiration and even the large wings that defends its knee add an additional touch of precision to any 14th-century French armor.
FULLY FUNCTIONAL and ideal for LARP or LATE MEDIEVAL KNIGHTLY REENACTMENT.
ONE SIZE FIT FOR EVERYONE.
These are meticulously handmade from sturdy soft steel of 16 caliber and can be fastened perfectly to your legs with a set of genuine legitimate leather straps.
To create these beautiful leg armor, we took inspiration directly from an existing pair of legs belonging to the young Charles VI of France, preciously preserved in the French city of Chartres and dated from about 1380-90.
Its form of historical inspiration and even the large wings that defends its knee add an additional touch of precision to any 14th-century French armor.
FULLY FUNCTIONAL and ideal for LARP or LATE MEDIEVAL KNIGHTLY REENACTMENT.
ONE SIZE FIT FOR EVERYONE.
€181.00
Handmade padded cotton canvas glove gloves
Out-of-Stock
Used primarily as a form of hand protection by militiamen, infantry soldiers, lancers and other men in light armor, on the battlefields of the 12th, 13th and 14th centuries, our medieval padded gloves are truly historic when it comes to their origin.
Handmade from HEAVY-DUTY CANVAS COTTON and SUPPLEMENTARY GENUINE SUEDE, these gloves offer the unparalleled grip of your favorite weapon. With a length of approx. 29 cm and a circumference of approx. 27 cm, are available in a size that fits most.
Handmade from HEAVY-DUTY CANVAS COTTON and SUPPLEMENTARY GENUINE SUEDE, these gloves offer the unparalleled grip of your favorite weapon. With a length of approx. 29 cm and a circumference of approx. 27 cm, are available in a size that fits most.
€36.41
Medieval caliber 16mm fantasy knight grevas
These creatures from your enemy's kingdom think twice before making way for yours. For your kingdom is guarded by you; a powerful knight, riding his faithful horse, wearing his ELEGANT KNIGHT GREVAS that protected the guardian in all his missions and highlighted him. So be sure to dress up our MEDIEVAL FANTASY KNIGHT STRIKES as you prepare for your next LARP, cosplay, reenactment or medieval event.
These grevas are hand made of robust 16 gauge soft steel that makes them fully functional and will surely accompany you in almost every event, battle after battle. These are fastened with two sturdy leather straps and steel buckles. Each greva is approximately 35.5 cm (13.9 inches) long, 15 cm (5.9 inches) in the top width, 12 cm (4.7 inches) in the lower width. These graves are available in a size that fits most.
These grevas are hand made of robust 16 gauge soft steel that makes them fully functional and will surely accompany you in almost every event, battle after battle. These are fastened with two sturdy leather straps and steel buckles. Each greva is approximately 35.5 cm (13.9 inches) long, 15 cm (5.9 inches) in the top width, 12 cm (4.7 inches) in the lower width. These graves are available in a size that fits most.
€101.75
Medieval fantasy greaves with Knee Cops Poleyns calibre 18
The battle is about to begin. Your squad is called forward and, as you calmly take your place in the front row, you instinctively grab your deadly blade. Firmly affixed to your shins are your classic knight's grevas, and you know that when the time comes to attack, they won't slow you down as you approach your poor opponents!
These greams are handmade in soft 18 gauge steel and are sturdy but lightweight, ideal for fantastic LARP and Cosplay costumes. When used, they are held firmly in place by two sturdy leather straps at the back. This pair comes in a size that fits more.
These greams are handmade in soft 18 gauge steel and are sturdy but lightweight, ideal for fantastic LARP and Cosplay costumes. When used, they are held firmly in place by two sturdy leather straps at the back. This pair comes in a size that fits more.
€116.74
Simple Grevas Medieval Armor LARP caliber 18
Good, simple and reliable protection is all you need during your missions. And whatever adventure you're in, these simple but sturdy steel grevas will complement your outfit well and help protect your exposed shins from sword and arrow attacks.
Handmade 20 gauge soft steel (or 18 gauge on request), these 14-inch long grevas are lightweight and therefore an excellent companion for LARP or Renaissance Fair.
Handmade 20 gauge soft steel (or 18 gauge on request), these 14-inch long grevas are lightweight and therefore an excellent companion for LARP or Renaissance Fair.
€52.48
Viking Splinted Greaves Steel Grevas Calibre 16mm
Have you always wanted to enhance your Viking battlewear with proper leg protection?
These sturdy viking shin splints may be exactly what you're looking for!
To design the model presented here, we were freely inspired by the archaeological finds of tomb 8 of Valsgärde (usually dating from the 7th century, i.e., the pre-Viking Vendel era).
Well designed by our skilled craftsmen of genuine 3 to 4 mm thick leather and sturdy 16 gauge soft steel plates, these viking protectors are fully functional and will be an ideal companion for your next viking battle reenactment.
Note: it seems that one of the worlds used for this type of protection may have been "scancgebeorg".
These sturdy viking shin splints may be exactly what you're looking for!
To design the model presented here, we were freely inspired by the archaeological finds of tomb 8 of Valsgärde (usually dating from the 7th century, i.e., the pre-Viking Vendel era).
Well designed by our skilled craftsmen of genuine 3 to 4 mm thick leather and sturdy 16 gauge soft steel plates, these viking protectors are fully functional and will be an ideal companion for your next viking battle reenactment.
Note: it seems that one of the worlds used for this type of protection may have been "scancgebeorg".
€106.03
Dark Knight Steel Grebes with Poleyns / Knee Cops Calibre 18
The battle is about to begin. Your squad is called forward and, as you calmly take your place in the front row, you instinctively grab your deadly blade. Firmly affixed to your shins are your classic black knight grevas, and you know that when the time comes to attack, they won't slow you down as you approach your poor opponents!
Handmade soft steel of 18 caliber, these grevas are sturdy and lightweight, ideal for amazing LARP and Cosplay clothing. Its total height is approx. Four eight inches. They are held firmly in place by two sturdy leather straps at the back.
Handmade soft steel of 18 caliber, these grevas are sturdy and lightweight, ideal for amazing LARP and Cosplay clothing. Its total height is approx. Four eight inches. They are held firmly in place by two sturdy leather straps at the back.
€127.45
Viking clamps splinted historic functional armor weapons caliber 16
Have you always wanted to improve your Viking battlewear with proper arm protection? These robust Viking clamps may be exactly what you're looking for! To design the model presented here, we were freely inspired by the archaeological finds of tomb 8 of Valsgärde (usually dating from the 7th century, i.e., the pre-Viking Vendel era).
Well designed by our skilled craftsmen of genuine 3 to 4 mm thick leather and sturdy 16 gauge soft steel plates, these viking protectors are fully functional and will be an ideal companion for your next viking battle reenactment. Note: it seems that one of the worlds used for this type of protection may have been "scancgebeorg". One MORE SIZE.
Well designed by our skilled craftsmen of genuine 3 to 4 mm thick leather and sturdy 16 gauge soft steel plates, these viking protectors are fully functional and will be an ideal companion for your next viking battle reenactment. Note: it seems that one of the worlds used for this type of protection may have been "scancgebeorg". One MORE SIZE.
€64.26
Protection for warrior arms Armor of medieval arm made by hand caliber 16
Good, simple and reliable protection is usually all you need during your missions... And whatever adventure you're in, these steel armbands will complement your outfit very well and help protect your exposed forearms from attacks of swords and arrows.
Meticulously HANDMADE 16 gauge resistant MILD STEEL, these clamps are fully functional steel armatures. A tightly riveted, comfortable and shock absorbing GENUINE LEATHER sheet on the inside allows you to use them longer. Its total length is approx. Eight inches.
ONE SIZE
Meticulously HANDMADE 16 gauge resistant MILD STEEL, these clamps are fully functional steel armatures. A tightly riveted, comfortable and shock absorbing GENUINE LEATHER sheet on the inside allows you to use them longer. Its total length is approx. Eight inches.
ONE SIZE
€73.90
