Full Plate Armors

-20%

Helm Templario with nasal "St. Wencelass"

This helmet is a replica of the original "Wencelas", dating from the 10th century.It is made of steel with 2mm thickness and reinforced in the nasal.Includes adjustment straps, leather.Sizes available:
M: up to 62 cm head circumference
Weight: from 2.15 to 2.55kg

€123.00

€153.75

-20%

Battle-Ready Helmet

Made of steel with 2 mm thicknessAvailable in three sizes (display size on order)Size S: for head circumference approx. 59 cmSize M: for head circumference approx. 61 cmSize L: for head circumference approx. 62 cmWeight approx: 1.5 kgIt features inside lining and adjustable leather strap.

€73.80

€92.25

-20%

Helmet with flaps

The Iron Hat has been worn in Europe for several centuries.Features:
Made of 2mm thick steel. It has side flaps for face protection. Includes interior lining and leather adjustment straps.Weight approx: from 3.85 kg to 4.70 kgSizes available:

S = Head circumference of 58 cmM = Head circumference of 61 cm

€158.08

€197.60

-20%

Viking Helmet

Last items in stock

This fully ready replica for the battle of a historic Viking helmet is made of 2 mm steel. The two halves of the helmet are doubly welded together (inside and outside). The steel supports as well as the 2 mm spectral section are riveted to the helmet. This type of tough workmanship ensures a robust product that offers the best possible protection during battle reconstitution.

This type of helmet was popular among vikings during the 8th and 9th centuries. The direct mail safes used to be worn underneath or fit the helmet.

Available in various sizes.

€126.46

€158.08

-20%

Backplate for Dark Warrior and Dark Drake

Backplate for Dark Warrior and Dark Drake

Epic Armory's Dark Warrior Back Plate is a low-fantasy armor piece that matches the Dark Warrior Chestof the Epic Armory and Dark Darkness, protecting the back and spine.

Size
Length approx.
Width approx.
Weight approx.

S
31 cm
47 cm
1.5 kg

M
37 cm
54 cm
2 kg

I
39 cm
60 cm

2.25 kg

€186.84

€233.55

-20%

Black Drake Pectoral

Black Drake Pectoral, var. Sizes

Drake's Dark Pectoral from Epic Armoury is a finely sculpted piece of armor that protects the front of the trunk, chest and abdomen.

€226.27

€282.84

-20%

Churburg Armor - Polished

Churburg Armor - Polished

This breastplate or battleship is modeled after pieces from churburg's collection in South Tyrol, whose pieces have been produced over the centuries by gunsmiths from Milan or Innsbruck, whose style is reflected here.

The front covers the chest, the space around the neck and arms allows a padded underwear like a Gambeson and other pieces of armor to be easily combined. The lower part involves the stomach and kidneys. With crossed straps behind the back and attached to the armor itself, everything is kept in position.

Details:

- Material: 1 mm steel

- Weight: approx. 3 kg

- Color/s: polished steel

€248.71

€310.89

-20%

Cross-helmet, 2 mm steel, with leather coating

Last items in stock

Cross-helmet, 2 mm soft steel, with leather coating
Ready for battle

Attractive reconstruction of a large transverse ca rudder. 1180 A.D., also called pot hull, bucket hull and barrel rudder. Includes a very comfortable leather inlay as well as a chin strap with buckle.

€163.35

€204.19

-20%

Warrior shoulder plates (steel), pair

Warrior shoulder plates are made of 1 mm thick steel with rivets and without sharp edges to make them safe for LARP weapons..

€110.66

€138.32

-20%

Viking helmet with mesh dimension

Last items in stock

Medieval Viking helmet in polished steel with mesh dimension, 1mm thick and leather strap. Includes foam cushion. T-M (circumference of 60 cm). T - L (67 cm circumference).

€79.04

€98.80

-20%

Protection of the Upper Leg Dark Warrior, Steel

Dark Warrior upper leg (or tassets) protection helps protect the thighs and groin from sword blows and other impacts. Two sets of steel plates protect the hips and the outside of the thighs, a third set of smaller plates protects the groin and parts of the inner thighs. They are made of 1 mm thick steel without sharp edges and are therefore safe for LARP weapons . It is worn with a leather belt and additionally on the shoulders with belt suspenders. What makes this piece of Epic Dark's epic dark line armor of Epic Armory so special is dark steel that is decorated with steel rivets to represent a cruder and more ancient appearance.

€210.77

€263.47

-20%

Upper Leg Protection, Steel

Upper Leg Protection (or tassets) Warrior helps protect the thighs and groin from sword blows and other impacts. Two sets of steel plates protect the hips and the outside of the thighs, a third set of smaller plates protects the groin and parts of the inner thighs. They are made of 1 mm thick steel without sharp edges and are therefore safe for LARP weapons . It is worn with a leather belt and additionally on the shoulders with belt suspenders. As this upper leg protection is neutral style, it will be a great addition to any LARP character armor.

€231.85

€289.81

-20%

Viking Warrior Armor ideal for LARP

First-scale armor dates back to antiquity (long before the Vikings existed). And not just through time, but scale armor protected soldiers and warriors from all over the world. Whether byzantine or Viking armor, the overlapping scale construction has been favored by all kinds of powerful warriors!
Our reproduction is HANDMADE from heavy-duty 20 gauge MILD STEEL scales riveted into a sturdy leather back, making it ideal for VIKING COSPLAY AND LARP. It fully covers the trunk, remaining quite light. It is available in three sizes: medium (chest 94-104 cm), large (chest 105-115 cm) and extra large (chest 116-126 cm) (Measure WITH gambeson) and is highly adjustable thanks to its multiple genuine leather straps.

€294.03

€367.54

-20%

Morion Helmet

Last items in stock

The Morion of the Epic Armory is a steel helmet inspired by the Spanish conquerors of the fifteenth to sixteenth centuries, conquering the world for Gold, God and Glory.

€105.39

€131.73

-20%

Helm Crusaders

Last items in stock

Epic Armory's Crusader Helmet is a closed helmet designed to protect the head during combat.

€94.85

€118.56

-20%

Fourteenth-century Brigandina of Kusnacht

Last items in stock

This gorgeous fourteenth-century bandit is directly inspired by the famous Kusnacht bandit found in a castle in Switzerland. He is one of the best-known bandits of the fourteenth century and also one of the most popular of today, both in medieval tournaments and battlefields and in Behourd and jousting.
And there's no doubt why, because the intelligent design of the original that we directly emulated offers an extremely high level of protection and maximum mobility. All the plates overlap, allowing the brigandine to spread any impact on the fighter's torso efficiently, as each plate hit by an impact is actually superimposed on other plates, actually allowing the diffusion of any blow, and allows for incredible mobility at the same time; Even kicking this type of brigandine high is totally possible! You really appreciate the great range of motion that overlapping chest plates allow. Even using a long sword or rod gun will be a real pleasure with this type of equipment

€463.70

€579.63

-20%

Fifteenth-century medieval Leeds Brigandine

Last items in stock

Brigandina was the most common form of protection among commoners and nobles. On a fifteenth-century battlefield you can find all styles of bandits, from the most common archers to the most expensive and luxurious of the high-ranking nobles. A versatile form of protection that offers excellent mobility, a historic brigandine is characterized by its ingenious construction. It consisted of hundreds of small plates under a sturdy tarp or leather cover that gave it an iconic look, with every row of plates appearing elegantly on the exterior. Not only did it look very distinctive, but it was extremely comfortable, precisely because of the excellent mobility it allowed. All these parameters sustained the advantage of being able to be used for many hours, something that all the re-enactors respected and enjoyed for hours on the battlefields and long events. A brigandine was also quite effective in offering excellent protection, forming a perfect balance between having almost no movement impediment and retaining a significant amount of protection. It was usually worn by a private soldier, with chain mail underneath or simply a pair of chainmail sleeves, a kilt and a limited amount of armor (all available separately). Knights and soldiers wore it along with armor for the limbs and the rest of the body. So whether you want to recreate a fifteenth-century infantryman or a twenty-first-century soldier, MAKE SURE OUR BRIGANDINA LEEDS IS THE BEST POSSIBLE CHOICE! Directly inspired by an original found today in the royal arsenals of Leeds, England, you can be sure that it improves your mobility and offers important protection as you fight event after event, battle after battle, reenactment after reenactment.

€747.21

€934.01

-20%

Viking lamellar armor for shoulder and body protection

Last items in stock

His round Viking shield won't be the only thing protecting him. This amazing lamellar armor will also do! It is handmade with hundreds of blackened steel plates superimposed with pure brass plates carefully arranged in a row in the center. And the integrated shoulder armor is lined with leather to protect your shoulders from friction. Try it and you'll know right away why it was so popular back then.
The 20-gauge plates are glued with thick leather lining and fitted into a sturdy real leather armor frame. When placed, it ties and fastens to the back with matching leather laces and leather flaps. It is available in three sizes: medium (chest up to 110 cm), large (chest up to 120 cm) and extra large (chest up to 135 cm) (measure COM gambeson) and is highly adjustable thanks to its multiple genuine leather straps.
Note: This product is carefully coated with a layer of oil when packaged that acts as a temporary (protective) layer against corrosion (rust), which can be easily cleaned with any degreasing product or even with a dry cloth

€558.55

€698.18

-20%

Viking armor of lamellar scales with Visby plates

Last items in stock

A Viking warrior, enjoying his toasts at the banquet table, dressed in his magnificent lamellar armor, celebrates his victory. After all, who could defeat him when he donned this impassable and well-crafted Viking lamellar armor with carefully superimposed Visby steel plates! One of the most attractive features of this lamellar armor is the supply of six sheets of leather on the shoulders (3 in each) to firmly hold your shoulder pads (lamellar shoulder pads are available separately).
This artwork is handmade from Visby Gauge 20 MILIMIT STEEL plates, mounted with genuine leather ropes. The entire structure of this armor is fixed on a sturdy leather support, making it strong and durable. It is available in three sizes: medium (chest 94-104 cm), large (chest 105-115 cm) and extra large (chest 116-126 cm) (measured WITH gambeson) and is highly adjustable thanks to its multiple real leather shoelaces.

€524.87

€656.08

-20%

Viking warrior scale pectoral ideal for LARP

First-scale armor dates back to ancient times (long before the Vikings even existed). And not just over time, but armor at scale has protected soldiers and warriors around the world. Whether it was Byzantine or Viking armor, the overlapping scale construction was preferred by all kinds of such powerful warriors!
Our reproduction is HANDMADE from robust 20-gauge MILIMIT STEEL scales riveted into a sturdy leather holder, making it ideal for VIKING COSPLAY AND LARP. It completely covers the trunk, remaining quite light. It is available in three sizes: medium (chest 94-104 cm), large (chest 105-115 cm) and extra large (chest 116-126 cm) (measured WITH gambeson) and is highly adjustable thanks to its multiple genuine leather handles.

€337.24

€421.55

-20%

Viking helmet

Gjermundbu helmet with riveted aventail, 2 mm steelGjermundbu helmet with riveted aventail, 2 mm steel
Gjermundbu helmet with riveted aventail, steel 2 mm
- ready for battle

€188.69

€235.86

-20%

Elmo Crusaders ready for battle

Crusader helmet, 2 mm steel
- ready for battle
A replica ready for the battle of a helmet of the late 12th century worn by the knights of the Christian orders, such as the Hospitalries and Templars during the Crusades. It's a flat top helmet with a large front plate. The helmet is made of steel 2 mm sheets that are all connected and fixed by rivets. A comfortable, adjustable and padded padded lining is riveted into the helmet, as well as a leather strap with brass buckle.
This helmet is available in sizes M and L.

size
max. head circumference
Internal distance back to forehead approx.
Internal distance ear to ear approx.
Weight approx.

m
61 cm
22 cm
19 cm
3.3 kg

I
64 cm
23 cm

20 cm3.5 kg

€172.20

€215.25

-20%

Warrior Neck Plate, Steel

Warrior Neck Plate, SteelThe Warrior Neck Plate consists of a pectoral and a smaller back plate and features riveted leather straps with buckles for an individual fit. In addition, this piece of armor provides additional fixings for shoulder armor. Made of 1mm thick steel with rivets and no sharp edges, therefore safe for LARP guns. Since this neck plate is neutral in style, it will be a great addition to any LARP character armor.Details:- Material: 1mm steel, vegetable-tanned leather (handles)- Available sizes: S, M/L/XLMeasures:

Size
Weight
Width
Neckline diameter

S
approx. 450 g
approx. 30 cm
approx. 14 cm

M/L/XL
approx. 650 g
approx. 34 cm
approx. 17 cm

Keep armor pieces dry and apply a thin layer of oil during storage to prevent rusting. Scrub with fine steel wool to remove stains and wipe with oil if rust appears. To increase the longevity of the leather parts of your armor, maintain them regularly with leather care products.

€63.96

€79.95

-20%

Italian Bascinet, Barbute helmet, about 1470, 2 mm steel

Italian Bascinet, Barbute helmet, about 1470, 2 mm steel- ready for battle.

€158.08

€197.60

-20%

Bacinete churburg style , year 1390

Functional medieval steel barbuta of 1.6 mm. Includes leather chin strap. The barbuta served as a shelter for the head and had as an element the collar that defended the neck at the front and the cover that defended the neck from behind.

€210.77

€263.47

-20%

T-shaped Barbute, 15º C., Medieval Helmet, Ready for Battle, 2mm Steel

Italian Barbute T-shaped, 15th century, battle-ready helmet, steel2 mm Details:- Suitable for reconstitution ofcombat - Material: 2mm steel (14 gauge), leather inlay, leather chin strap with aged brass buckle- Suitable for head circumference up to approx. 65 cm- Long distance (from back to front): approx. 22 cm- Short distance (ear to ear): approx. 19 cm- Height: approx. 26 cm- T-aperture dimension: eye area approx. 11 x 3 cm / mouth area approx. 9 x 3.5 cm (5.5 cm at the bottom edge)- Weight: approx. 2.8 kgLooking for a high-quality yet affordable medieval helmet suitable for combat reenactment? Well, it looks like your search is over! This rugged handmade helmet, based on a historic piece, offers great value for money. Plus, its authentic appearance and elegant simplicity are sure to turn heads!The barbute or barbuta, a specialized form of the celata or sallet, is derived from the earlier bascinet. This helmet without a visor of Italian origin was most popular in northern Italy in the 14th and 15th centuries, but it was also used throughout Europe.The barbute offered good protection for the head and face without excessively restricting vision and breathing. The rounded bowl of the helmet covered the head and neck almost completely, and often featured an upper crest or low crest that ran from the forehead to the nape of the neck. A defining feature of this type of helmet was the forward extension from the sides towards the front, which protected the sides of the wearer's face below the eyes. Another main distinguishing feature was the T- or Y-shaped opening of the face.The authentic, battle-ready SPQR reconstruction we offer here is based on the helmet of the famous Milanese Avant armour that is on display for people to admire at the Kelvingrove Art Gallery and Museum in Glasgow, Scotland. This late medieval armor, one of the oldest almost fully preserved armor of its kind in Europe, is dated to about 1440-1445. It was created in Milan (one of the most productive cities for the manufacture of armor and weapons of the European Middle Ages) for a member of the noble von Matsch family of the Castle of Churburg (Castel Chur) in South Tyrol, Italy. Our barbute with T-shaped opening and center ridge from front to back is handmade with approx. 2 mm steel. The opening and bottom edge are reinforced and the interior is blackened for better corrosion resistance. The riveted suspension lining made of leather ensures a comfortable fit and good wearing comfort, and the sturdy, adjustable chin strap with historic brass buckle provides a secure hold.Suitable for combat reenactment, LARP, stage or TV/film, this slim, fully wearable knight helmet is best suited for late medieval scenarios and ideal for completing a European warrior's armour. Of course, our T-faced barbute not only impresses with its combination of authenticity, safety and comfort, but is also a real eye-catcher that will make a great decorative addition to any helmet collector's treasure chamber.Top-notch quality at an unbeatable price – Do you want to treat yourself to a good-value piece of history that will add the finishing touch to your medieval knight's armor without breaking your budget? So take the chance and order this top-class helmet today!The steel used here is not rust-proof and may have slight surface stains in places. We recommend that you regularly maintain helmets, for example by using Ballistol Universal Oil, which is ideal for steel care. Specifications may vary slightly from part to part.

€167.28

€209.10

-20%

Spangenhelm, 1.6 mm steel

This is a fully battle-ready replica of a historic spangenhelm.It is made of 1.6 to 3.2 mm steel. The two halves of the helmet are welded together. The metal straps that form the rudder frame (Spangen), as well as the 3 mm steel nose, are riveted to the helmet.The fine workmanship and overlapping construction ensure high robustness and thus the best possible protection during battle reenactment.Delivery includes a very comfortable and high-quality adjustable quilted lining and a riveted leather chin strap and brass buckle.This type of rudder is available in sizes M and L.Details:- Material: 1.6mm to 3.2mm steel near the Spangen (metal plate tips)- Nasal force: 3 mm- Riveted quilted fabric lining and strapLeather Chin Size Chart:

Size
Maximum Head Circumference
Internal distance back to forehead approx.
Internal distance from ear to ear approx.
Approx. weight

M
61 cm
22 cm
18.5 cm
3 kg

L
63 cm
23.5 cm
20 cm
3.25 kg

€147.60

€184.50

Armor

Subcategories

Folow Us

Manager

Amanda Brown

Online from 09:00 - 19:00 GMT+1